Davies Craig DC8040 EWP115 Alloy Kit with 12V Remote Electric Water Pump

EWP®115 Alloy Kit – Remote Electric Water Pump (12V)

The EWP®115 (115 litres per minute) is ideal for small, medium, large, high-performance, and 4x4 vehicles. It enhances engine cooling control and capability, while contributing to increased horsepower and torque, with the potential to optimize fuel consumption.

A practical alternative to belt-driven mechanical water pumps or installed as an auxiliary pump. Mechanical pumps run directly off the engine and consume power. The EWP®115 connects directly to the electrical system, bypassing the engine, and can free up to an additional 10kW (13hp). Our EWP range is also widely used in intercooler applications.
The kit includes:

1 x EWP®115 Alloy 12V Pump

1 x EWP® Basic Wiring Harness

2 x Hose Clamps

1 x Red Wire Joiner

1 x Red 6mm Ring Terminal

1 x 12V, 40A, 5-pin Relay with Resistor Protection

1 x 8 x 3/8 BZ Self Tapping Screw

Technical Specifications

Voltage: 12-volt pump
Operating Voltage: 3V DC to 15V DC
Max Current: 10A at 13V
Flow Rate (max): 139 L/Min (36.7 US Gal/Min) at 13V DC
Operating Temperature: -40°C to 120°C (-40°F to 248°F)
Pump Design: Clockwise centrifugal with volute chamber
Pump Weight: 920 grams (2.03lb)
Pump Material: Aluminum (powder-coated)
Burst Pressure: 500 kPa (72.5 psi)

Seal: Ceramic face seal

Self-priming: No, none of our pumps are self-priming

Compatible with hoses from 35mm to 51mm (1⅜” to 2”) Inlet: -16AN (12) Outlet: -16AN (12)

Quick connect fitting size: EWP Inlet and Outlet 38mm

With 3mm sleeve (DC8510) 44mm

With 6mm sleeve (DC8511) 51mm