{"product_id":"soporte-de-combustible-sin-bomba-radium-engineering-para-chevrolet-corvette-2014-2019","title":"Radium Engineering fuel hanger without pump for 2014-2019 Chevrolet Corvette","description":"\u003cp\u003eFUEL PUMP HANGER 20-1010\u003c\/p\u003e\n\n\u003cp\u003eCOMPATIBILITY\u003c\/p\u003e\n\n\u003cp\u003e2014-2019 Chevrolet Corvette\u003c\/p\u003e\n\n\u003cp\u003eGENERAL DESCRIPTION\u003cbr\u003e\nThis Radium Engineering fuel hanger replaces the factory fuel pump assembly. No cutting or modification of the vehicle is required for installation. REQUIREMENTS: A fuel pressure regulator and an external (low micron) fuel filter must be purchased separately. Optionally, plumbing kits include both components.\u003c\/p\u003e\n\n\u003cp\u003ePORTS\u003cbr\u003e\nThe fuel pump outlet has an 10AN ORB (7\/8\"-14) female thread on the top plate. However, an 8AN male adapter is included. The fuel return inlet has an 8AN ORB (3\/4\"-16) female thread on the top plate. However, a 6AN male adapter is included.\u003c\/p\u003e\n\n\u003cp\u003eAll connections are machined with a low profile to prevent interference with the surrounding area.\u003c\/p\u003e\n\n\u003cp\u003eCOMPATIBLE FUEL PUMPS\u003cbr\u003e\nThe 20-1010 hanger is configured to be used with a replacement fuel pump. NOTE: If two replacement fuel pumps are required, the additional dual pump kit will also be needed. The choice of the best fuel pump depends on the expected engine power, fuel type (gasoline, E85, etc.), and fuel pressure.\u003c\/p\u003e\n\n\u003cp\u003eAEM 50-1000\u003c\/p\u003e\n\n\u003cp\u003eAEM 50-1200\u003c\/p\u003e\n\n\u003cp\u003eWalbro GSS342\u003c\/p\u003e\n\n\u003cp\u003eWalbro F90000267\u003c\/p\u003e\n\n\u003cp\u003eWalbro F90000274\u003c\/p\u003e\n\n\u003cp\u003eWalbro F90000285\u003c\/p\u003e\n\n\u003cp\u003e*Walbro F90000295 (includes check valve)\u003c\/p\u003e\n\n\u003cp\u003e*Ti Automotive E5LM (includes check valve)\u003c\/p\u003e\n\n\u003cp\u003e*These pumps do not include an integrated check valve. This kit includes a high-flow check valve that attaches to the outlet of these specific pumps.\u003c\/p\u003e\n\n\u003cp\u003eSTARVATION PROTECTION\u003c\/p\u003e\n\n\u003cp\u003eVarious mechanisms work together to direct fuel to the integrated collector and keep it full at all times. This ensures that the pump has sufficient fuel, even during aggressive driving. The internal pump is fed with fuel from three different sources:\u003c\/p\u003e\n\n\u003cp\u003eConstant return fuel, drawn from the passive side of the tank.\u003c\/p\u003e\n\n\u003cp\u003eConstant low-pressure return fuel from the pressure regulator.\u003c\/p\u003e\n\n\u003cp\u003eThe two one-way fill valves at the bottom of the collector allow fuel to enter, but not to exit. Each one-way valve allows a flow of 355 LPH, keeping the collector at the current tank level.\u003c\/p\u003e\n\n\u003cp\u003eELECTRICAL\u003c\/p\u003e\n\n\u003cp\u003eCustom-designed stainless steel electrical studs easily handle the high current demand that compact multi-pin connectors cannot offer. These serviceable connections are hermetically sealed and resistant to all standard and specialty fuels. Non-conductive anodized aluminum acorn nuts are included to prevent accidental short circuits. Additionally, the internal in-tank wiring is insulated with high-quality, chemical-resistant ETFE.\u003c\/p\u003e\n\n\u003cp\u003eNOTES\u003c\/p\u003e\n\n\u003cp\u003eFor single fuel pump installations, the factory pump wiring can be reused.\u003cbr\u003e\nIt is recommended to upgrade the factory wiring to ensure the pumps receive full power and operate at their maximum potential.\u003c\/p\u003e\n\n\u003cp\u003eUniversal fuel pump wiring kits can be found HERE. Select one for each replacement pump.\u003c\/p\u003e\n\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\n\u003cp\u003eSimple installation\u003c\/p\u003e\n\n\u003cp\u003eReuses the factory cross-over siphon jet pump\u003cbr\u003e\nIncludes collector to prevent fuel starvation\u003cbr\u003e\nIntegrated 10AN ORB female pump outlet port\u003cbr\u003e\nCompatible with various pumps\u003cbr\u003e\nCompatible with brushless fuel pumps\u003cbr\u003e\nIncludes fuel filters\u003cbr\u003e\nSupports up to 2 pumps with an add-on module\u003cbr\u003e\nCompatible with high-current electrical components\u003cbr\u003e\nCompatible with gasoline, methanol, and E85\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688197665108,"sku":"USA-RAD-20-1010","price":419.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/USA-RAD-20-1010_9da299f7-defa-423e-8f53-fc2e47e77c0b.jpg?v=1788435842","url":"https:\/\/www.thetunerlab.com\/en\/products\/soporte-de-combustible-sin-bomba-radium-engineering-para-chevrolet-corvette-2014-2019","provider":"Thetunerlab","version":"1.0","type":"link"}