{"product_id":"pantalla-multifuncion-universal-canchecked-mfd32-gen2","title":"CANchecked MFD32 Gen2 Universal Multifunction Display","description":"\u003cp\u003eWith the CANchecked MFD32 Gen2 universal data display, you always have all information in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2, in its universal version, fits any vehicle and is a smart display with essential functions. Its lightweight plastic housing stands out with a symmetrical design and can be used both vertically and horizontally.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eCompact Size: External dimensions: 89.5 x 60.5 mm; depth: 19.5 mm (without connector).\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003c\/p\u003e\n\n\u003cp\u003eGear Indicator: Directly via Can Bus or calculated from speed and rpm.\u003c\/p\u003e\n\n\u003cp\u003eTouchscreen: Navigate through pages with intuitive gestures.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Design your own pages, add images, or launch animations.\u003c\/p\u003e\n\n\u003cp\u003eAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003c\/p\u003e\n\n\u003cp\u003eCustomizable Alarms: Easily configure and trigger customizable alarms. For example, receive an important warning when exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined sample pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked DSS, you can fully customize your display. With the integrated log viewer, you can download and visualize log files. Additionally, a CAN logger is included. The core is the integrated \"TRI Editor,\" with which you can adjust sensors (whether CAN Bus or internal): assign min and max values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: \"What values can I get from my ECU?\" The answer: \"ALL.\"\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. In these files, all queried sensors are defined. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, ambient temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, mass air, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Of course, your new data display supports a wide range of freely programmable control units, such as:\u003c\/p\u003e\n\n\u003cp\u003eDTA Fast Ecumaster Emerald Emtron Haltech Hondata KMS van Kronenburg LinkECU MaxxECU MBE Megasquirt Motec Motorsport Electronics Syvecs Trijekt VEMS\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents\u003c\/p\u003e\n\n\u003cp\u003eEach package includes:\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display with lightweight plastic housing\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimping pins\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up for connecting external NTC sensors)\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5V signals as well as... NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows generating additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC10001 GPA32 - Adapter for 52mm gauge MFD32(S)\u003cbr\u003e\nCC24000 SLM08 - External Shift Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN Wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids 1\/8\" NPT\u003cbr\u003e\nCC22903 TCC01 - K-type Converter 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963526033748,"sku":"CC03102","price":510.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC03102_01_b95a5fdd-3bdd-4329-9479-a3e0e71309e8.jpg?v=1788538575","url":"https:\/\/www.thetunerlab.com\/en\/products\/pantalla-multifuncion-universal-canchecked-mfd32-gen2","provider":"Thetunerlab","version":"1.0","type":"link"}