{"product_id":"pantalla-canchecked-mfd32-gen2-para-mitsubishi-lancer-evolution-x-rhd-07-16","title":"CANchecked MFD32 Gen2 Display for Mitsubishi Lancer Evolution X RHD 07-16","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific for your Mitsubishi Lancer Evolution X: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData logging: Record and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display dims automatically along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and visualize log files. In addition, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered the data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All sensors to be queried are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, ambient temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the vent insert for right-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimping pins\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nProtective film for the screen (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5 V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is required between 5 V and the signal. In this way, ethanol content and temperature can be displayed and recorded directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced functions\u003c\/p\u003e\n\n\u003cp\u003eWith the mathematical channels, you can calculate sensors with each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963543138644,"sku":"CC38011","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC38011_01_25be8972-5210-4f08-8577-3378655a23ac.jpg?v=1788513615","url":"https:\/\/www.thetunerlab.com\/en\/products\/pantalla-canchecked-mfd32-gen2-para-mitsubishi-lancer-evolution-x-rhd-07-16","provider":"Thetunerlab","version":"1.0","type":"link"}