PRODUCT DESCRIPTION
Product details
With this MFD15 Gen2 CANchecked data display specific for your Seat León 1P, you will always have all relevant values in view.
The MFD15 Gen2 is equipped with an OLED screen that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and a connection kit. It is operated by two buttons on the front panel. You can also connect our optional rotary knob.
Key Features
Compact design: 52 mm diameter and only 12.5 mm deep.
LED on the front panel: The front LED of the display can be used as a shift light or as a warning light.
Can Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards, with OBD2 and deep values for VAG vehicles.
Wi-Fi: Connect it to your smartphone or PC and configure it using our web app.
Additional inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.
Predefined alarms: Easily activate and customize predefined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.
Customization: Use your own logo and color scheme to personalize your MFD15 Gen2.
Online logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.
Flex Fuel*: View ethanol content and temperature on the display.
CAN switching*: Switch between CANs using the display buttons and send readings from your analog inputs to the CAN bus.
Different views
Choose up to eight pages with different views and customize the display to best suit you and your vehicle:
Analog pointer
Dual value
Gear indicator
Quadruple values
Sextuple values
Bar + dual display
Round display
Bar graph (dual horizontal)
Performance meter
Bar graph (1 to 6 vertical bars)
Single value
Configuration via the online display setup software (oDSS)
New to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.
With oDSS, you can fully configure your display, log values (license required), upload your own start image, and update the display.
Supported values
A frequently asked customer question is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.
ECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is essential, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.
OBD2 queries via CAN Bus (11-bit/29-bit) are also implemented. Vehicle-specific protocols such as UDS or TP2 are also available.
Included by default: - OBD2 - 11 and 29-bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3
If the desired ECU is not listed, you can download or request the corresponding TRI/TRX from our database.
For all VAG vehicles manufactured from 2008 (and in some cases, for older models as well), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle return, high/low pressure, wastegate activation, and much more can be queried and displayed.
Integrated LED
The internal LED can be used as a shift light and as a warning light.
As a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.
When configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.
Package contents and extensions
Included in each package:
MFD15 Gen2 data display
Vehicle-specific trim for left-hand or right-hand drive
Vehicle-specific connection cable
Quick start guide
Connector B (6-pin Molex)
Connector C (12-pin Molex)
Pre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)
Crimping pins
Two 1 kΩ resistors (as pull-up resistor for NTC sensors)
Sensors of any type can be connected via the six analog inputs; we support 0-5 V linear sensors and NTC sensors.
The characteristic curves of our CAN-certified sensors are stored in the display from the factory and work immediately (plug and play):
