{"product_id":"pantalla-canchecked-mfd15-gen2-para-mazda-3-mps-lhd","title":"CANchecked MFD15 Gen2 Display for Mazda 3 MPS LHD","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display specifically for your Mazda 3 MPS, you will always have all relevant values in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim bezel and a connection kit. Operation is done via two buttons on the front panel. You can also connect our optional rotary knob.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eFront panel LED: The front LED on the display can be used as a shift light or a warning light.\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards, with OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePredefined alarms: Easily activate and customize predefined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlexible Fuel*: View ethanol content and temperature on the display.\u003c\/p\u003e\n\n\u003cp\u003eCan Switching*: Switch cans using the display buttons and send readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize the display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog Pointer\u003cbr\u003e\nDouble Value\u003cbr\u003e\nGear Indicator\u003cbr\u003e\nQuad Values\u003cbr\u003e\nSextuple Values\u003cbr\u003e\nBar + Double Display\u003cbr\u003e\nRound Display\u003cbr\u003e\nBar Graph (Dual Horizontal)\u003cbr\u003e\nPerformance Meter\u003cbr\u003e\nBar Graph (1 to 6 Vertical Bars)\u003cbr\u003e\nSingle Value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via Online Display Setup Software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can fully configure your display, log values (license required), upload your own start image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eA frequently asked question from customers is: Which values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is crucial, possibly even in the form of a DBC file that can be imported via our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 and 29 bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3\u003c\/p\u003e\n\n\u003cp\u003eIf the desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, also for older models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, selective cylinder ignition angle return, high\/low pressure, wastegate actuation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as both a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the pre-configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents and Extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in each package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Data Display\u003cbr\u003e\nVehicle-specific trim bezel for left-hand drive\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistors for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support linear 0-5V sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves of our CAN-certified sensors are stored in the display ex works and work immediately (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature Sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type Exhaust Gas Temperature Probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure Sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost Pressure Sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the appropriate license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External Rotary Knob with 50cm PnP Connection Cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN Harness\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - K-Type Transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - 6.5 bar (95 psi) Relative Pressure Sensor\u003c\/p\u003e\n\n\u003cp\u003e*Additional Licenses\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Real-time Logging\u003c\/p\u003e\n\n\u003cp\u003eWith the additional \"Real-time Logging\" license, your display can log sensor data in the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are logged (ATTENTION: for OBD and UDS, only those on display are shown). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol Sensor for Flexible Fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content as well as the fuel temperature and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching and AIN Forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the keys on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963494674772,"sku":"CC53050","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC53050_01_85662994-81be-4954-8b05-57614f412e11.jpg?v=1788681704","url":"https:\/\/www.thetunerlab.com\/en\/products\/pantalla-canchecked-mfd15-gen2-para-mazda-3-mps-lhd","provider":"Thetunerlab","version":"1.0","type":"link"}