{"product_id":"pantalla-canchecked-mfd15-gen-2-para-audi-a4-b6-b7-con-volante-a-la-izquierda-volante-a-la-derecha","title":"CANchecked MFD15 Gen 2 display for Audi A4 B6 \/ B7 LHD \/ RHD","description":"\u003cp\u003eWith this vehicle-specific MFD15 Gen2 data display for your Audi A4 B6\/B7, featuring CAN certification, you will always have all relevant values in view.\u003cbr\u003e\nThe MFD15 Gen3 incorporates an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and a connection kit. It is operated using the two buttons on the front panel. You can also connect our optional rotary knob.\u003cbr\u003e\nKey features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eFront panel LED: The front LED of the display can be used as a shift light or as a warning light.\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and, since 2008, OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePredefined alarms: Easily activate and customize predefined alarms. For example, get an alert when the exhaust gas temperature exceeds 900 degrees. Customization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline logging*: Record your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlex Fuel*: View ethanol content and temperature on the display.\u003c\/p\u003e\n\n\u003cp\u003eCAN switching*: Switch between CAN IDs using the display buttons and send your analog input readings to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize your display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog pointer\u003cbr\u003e\nDouble value\u003cbr\u003e\nGear indicator\u003cbr\u003e\nQuadruple values\u003cbr\u003e\nSextuple values\u003cbr\u003e\nBar + double display\u003cbr\u003e\nRound gauge\u003cbr\u003e\nBar graph (double horizontal)\u003cbr\u003e\nPerformance meter\u003cbr\u003e\nBar graph (1 to 6 vertical bars)\u003cbr\u003e\nSingle value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via Online Display Setup Software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eA new feature of our MFD15 Gen2 is the ability to access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can fully configure your display, log values (license required), upload your own startup image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported values\u003c\/p\u003e\n\n\u003cp\u003eA frequently asked customer question is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compliant with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is essential, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11 bit\/29 bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 and 29 bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3\u003c\/p\u003e\n\n\u003cp\u003eIf your desired ECU is not on the list, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, also for earlier models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle retardation, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as a shift light and as a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage contents and extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen3 data display\u003cbr\u003e\nVehicle-specific trim for left-hand and right-hand drive\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003cbr\u003e\nConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection wires of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimp pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistor for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support 0-5V linear sensors and NTC sensors. The characteristic curves of our CAN-certified sensors are stored in the display from the factory and work plug and play:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not preconfigured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not preconfigured\u003c\/p\u003e\n\n\u003cp\u003eFor the connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External rotary knob with 50 cm PnP connection cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22902 NTC01 - 1\/8 in. NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - 0-1250 °C K-type transducer\u003cbr\u003e\nCC22901 FLP01 - 0-10 bar (145 psi) pressure sensor M10x1\u003cbr\u003e\nCC22900 BST10 - 6.5 bar (95 psi) relative pressure sensor\u003c\/p\u003e\n\n\u003cp\u003e*Additional licenses\u003c\/p\u003e\n\n\u003cp\u003eReal-time logging of the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional \"Real-time logging\" license, your display can log sensor data in the oDSS. Subsequently, you can download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are recorded in the log (ATTENTION: for OBD and UDS, only those on the display are shown). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol sensor for Flex Fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content as well as the fuel temperature, and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN switching and AIN forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use your display keys or the rotary knob to toggle CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963503915348,"sku":"CC51012","price":372.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC51012_01.jpg?v=1788432435","url":"https:\/\/www.thetunerlab.com\/en\/products\/pantalla-canchecked-mfd15-gen-2-para-audi-a4-b6-b7-con-volante-a-la-izquierda-volante-a-la-derecha","provider":"Thetunerlab","version":"1.0","type":"link"}