Radium Engineering Fuel Hanger Plumbing Kit for 2010-2015 Chevrolet Camaro with Microfiber Filter

20-1326-03/5 FUEL HANGER PLUMBING KIT, CAMARO LS3/LS7/L99 (2010-2015) VEHICLE COMPATIBILITY: Camaro LS3/LS7/L99 (2010-2015)

These fuel hanger plumbing kits are identical, with one exception; the filter media. Kit 20-1326-03 uses a 10 micron stainless steel element. Kit 20-1326-05 uses a 6 micron glass microfiber element.

The Camaro kits include two 6AN PTFE feed lines that run from the fuel hanger to the fuel filter.

Two fuel lines are required for the following reasons: 1. A single 8AN fuel line will not fit between the fuel tank and unibody. The increased combined surface area of two 6AN lines fits perfectly. 2. The rear half of the stock fuel line is re-purposed. The stock fuel line incorporates the OEM fuel pressure sensor needed for ECU diagnostics. The remainder of the stock fuel feed line is re-purposed as a 6AN return line. The kit includes 4 green anodized hose retention adapters with clamps. The included fuel filter incorporates a built-in check valve.

The Camaro specific fuel filter mount requires NO permanent modifications to the vehicle. A thermal insulating sleeve is included to protect from abrasion and excessive exhaust heat.

A machined aluminum clamp secures the 8AN PTFE hose downstream from the exhaust manifold.

The 8AN PTFE line from the fuel filter feeds the right fuel rail. A fuel pressure regulator and gauge mount directly to the left fuel rail. Radium Engineering fuel rails and fuel rail plumbing kits are required.

A 6AN PTFE fuel line is provided that connects the fuel pressure regulator return port to the OEM fuel feed hardline.

Instructions PDF