Skip to product information
Fuel Rail Plumbing Kit for Nissan R35 GT-R VR38DETT Radium Engineering
Avatar 1 Avatar 2 Avatar 3
Igor Derenko, Joan Caballer and 3,000+ people trust us
USA-RAD-20-0956-PK

Fuel Rail Plumbing Kit for Nissan R35 GT-R VR38DETT Radium Engineering

4.9 (+3000)
734,83€

Not sure if this part is compatible with your car?

Text us on WhatsApp. We'll check it for you before you buy.

Official brands
🔧 Compatible with complete Drift projects
💳 Secure payment
🇬🇧 24/7 Support

PRODUCT DESCRIPTION

Product details

PORTS AND CONNECTIONS

The fuel rail ports are 8AN ORB thread.

8AN ORB Adapters, 8AN ORB Fuel Pulse Dampers, Fuel Pressure Gauge Adapters

20-0956-PK PLUMBING KIT: Fuel rail plumbing for the Nissan R35 GT-R. When used with 20-0556-02 fuel rails, this kit provides a simple, clean installation. A stainless steel bracket for the Radium fuel pressure regulator is included. Low-profile 90 degree SAE adapters with PTFE fuel hoses connect the OEM hard fuel lines to the fuel pressure regulator. PTFE fuel lines run from the fuel pressure regulator to the rear fuel rail ports. Two Radium fuel pulse dampers, a fuel pressure gauge, and all necessary adapters are included.

RA series regulators incorporate the industry's first tool-free pressure adjustment. No longer are a jam nut and adjustment screw required. With a simple twist of the knob, pressure is increased or decreased. To make pressure adjustment easier, incremental detents provide haptic feedback to the user. Each detent allows for a 1 psi (+/-0.5 psi) adjustment depending on the current fuel pressure.

RA series regulators incorporate a 360-degree rotating vacuum reference port with a dual O-ring seal. This is an industry first. It allows the installer to quickly orient the vacuum fitting in any direction without the need for tools. 4 interchangeable 10-32 threaded vacuum port fittings are included to cover all situations.

1. Barbed Fitting: A black zinc-plated 3/16" (5mm) barbed fitting machined from high-strength steel that is compatible with the following vacuum hoses: 5/32" (4mm), 3/16" (5mm), and 7/32" (6mm). 2. 3AN Male Fitting: A black zinc-plated adapter machined from high-strength steel that is compatible with 3AN hose ends. 3. Push-to-Connect Fitting: A nickel-plated brass push-to-connect fitting with Buna-N O-rings that is compatible with 1/4" OD rigid plastic tubing. 4. Vacuum Cap: A black oxide stainless steel screw that is used to run constant (non-dynamic) fuel pressure.

Instructions PDF

Secure shopping

Secure shopping

Pay with total security and confidence.
Fast shipping

Fast shipping

Shipping to Spain and Europe, in 5-7 days.
Experts by your side

Experts by your side

Over 10 years in the automotive world.
Verified parts

Verified parts

Each reference designed for competition.

WE WORK WITH THE BEST BRANDS

WHY THETUNERLAB

We don't just sell parts. We live drift.

We have spent years building cars, racing, and testing the exact same parts that we sell.

01

Real experience

We test before we recommend.

02

Compatibility

We help you choose the right part.

03

Official brands

Only trusted manufacturers.

04

Technical support

Before and after the purchase.

+10 years

of passion for drifting

+30.000

available products

+5.000

satisfied customers

24/7

passion for motoring

Pilots who trust us
@mcolsa94
@mcolsa94 badge
Drift Driver
@pedrogarcia_drifter
@pedrogarcia_drifter badge
DriftSpain driver
@merida.drift
@merida.drift badge
DriftSpain driver
@thepucho
@thepucho badge
DriftSpain driver
@glebprotasov._
@glebprotasov._ badge
DriftSpain driver
@manucanizarest
@manucanizarest badge
DriftSpain driver
@adrian_08_drift
@adrian_08_drift badge
DriftSpain driver
@joancaballer
@joancaballer badge
DriftSpain driver
@xaviercaballer17drift
@xaviercaballer17drift badge
DriftSpain driver
@igor_derenko_
@igor_derenko_ badge
DriftSpain driver
@seeronoseer
@seeronoseer badge
DriftSpain driver
@mcolsa94
@mcolsa94 badge
Drift Driver
@pedrogarcia_drifter
@pedrogarcia_drifter badge
DriftSpain driver
@merida.drift
@merida.drift badge
DriftSpain driver
@thepucho
@thepucho badge
DriftSpain driver
@glebprotasov._
@glebprotasov._ badge
DriftSpain driver
@manucanizarest
@manucanizarest badge
DriftSpain driver
@adrian_08_drift
@adrian_08_drift badge
DriftSpain driver
@joancaballer
@joancaballer badge
DriftSpain driver
@xaviercaballer17drift
@xaviercaballer17drift badge
DriftSpain driver
@igor_derenko_
@igor_derenko_ badge
DriftSpain driver
@seeronoseer
@seeronoseer badge
DriftSpain driver

Products you might be interested in

Have any questions? We'll answer them here.

How do I know if the parts are compatible with my car?

Each product indicates compatible models in the product description. If you have any questions, you can contact us and we will help you choose your best option.

When will I receive my order?

-If the product is in stock, the usual delivery time is 2 to 5 working days.
-If the product is out of stock, the delivery time is 7 to 15 working days.

What kind of warranty do the products have?

All our products come with the manufacturer's official warranty and comply with current regulations.

Do you ship throughout Europe?

Yes. We ship orders to Spain and most European countries using specialized transport agencies.

How can I contact you?

You can contact our team via WhatsApp, email, or our website's contact form.

How much is shipping?

Shipping costs depend on the type of product, its weight, dimensions, and the destination country. In most cases, the amount is calculated automatically during the checkout process before the order is finalized.

For some products, especially large items or those with special characteristics, shipping costs may require a manual review. If the amount shown does not match the actual shipping cost, we will contact you before processing the order to inform you of the final cost and request your confirmation before proceeding. We will never charge any additional fees without your authorization.