Port Injection Kit for Lamborghini Gallardo LP Radium Engineering Microfiber Filter

20-0967-05 PIK PLUMBING, GALLARDO LP

VEHICLE COMPATIBILITY: Lamborghini Gallardo LP550-2 (all versions), Lamborghini Gallardo LP560-4 (all versions), Lamborghini Gallardo LP570-4 (all versions). NOTE: Not compatible with Audi R8 or Lamborghini Huracan.

This kit allows for a standalone fuel injection system. It includes PTFE hoses, -AN adapters, 1:1 pressure regulator, pressure gauge, and fuel filter (stainless steel -03 or glass microfiber -05).

These components mount on the left side of the engine using the OEM threaded chassis mounts. No drilling or permanent modifications are required. Radium Engineering fuel surge tank is recommended to feed this system.

The regulator features the first tool-less pressure adjustment. No longer are locknut and adjustment screw required. With a simple twist of the knob, pressure is increased or decreased.
To facilitate pressure adjustment, it features incremental detents which provide haptic feedback to the user. Each detent allows a 1psi (+/-0.5psi) adjustment depending on the current fuel pressure. Additionally, RA series regulators incorporate a 360-degree rotational vacuum reference port with dual o-rings. This is the first in the industry. It permits the installer to rapidly orient the vacuum fitting in any direction without the use of tools.

4 interchangeable 10-32 threaded vacuum port fittings are included to cover all situations. 1. Barbed Fitting: A black zinc plated 3/16" (5mm) barb fitting, machined from high strength steel, compatible with the following vacuum hoses: 5/32" (4mm), 3/16" (5mm), and 7/32" (6mm). 2. 3AN Male Fitting: Black zinc plated adapter machined from high strength steel, compatible with 3AN hose ends. 3. Pressure Fitting: Nickel plated brass fitting with Buna-N O-rings, compatible with 1/4" OD rigid plastic tubing. 4. Vacuum Plug: Black oxide stainless steel screw which is used to maintain a constant (non-dynamic) fuel pressure. To maintain fuel pressure the same as the stock fuel system, this plug should be used. This kit is compatible with all types of gasoline, including unleaded, leaded, oxygenated, and premixes. Additionally, it is compatible with alcohol fuel blends, such as methanol, ethanol, and E85. INCLUDES: Fuel Filter (-03 Stainless Steel or -05 Glass Microfiber), RA Series Fuel Pressure Regulator, 1:1, Fuel Pressure Gauge, 0-100psi, 6AN Crimped PTFE Hoses (x4), Black Adapter Fittings, Black Mounting Bracket, Stainless Steel Hardware.

Instructions PDF