BMW E36 Wisefab DIY Front Drifting Kit

The long-awaited BMW E36 DIY kit is here! Have you ever wanted to drive a Wisefab with your BMW E36, but found it too expensive or too wide for your car? Now you have the opportunity to modify the original control arms and build the kit you need. It requires quite a bit of measuring, cutting, and welding, but the result is a cost-effective and efficient lock kit, suitable for both road and competition use.

Here's a video that explains the entire procedure in detail.

The upright add-on is the same classic Wisefab part we have used in our professional kits for many years.

The suspension arm extension, lock stop, bearing housing, and the bearing itself are also made from the same material we use in the professional kit.

Drop plates are not included and are optional; they can be purchased separately.

Steering ball joints (inner and outer) are not included. However, the necessary parts can be easily bought from any spare parts store. For inner ball joints, use Ford/Mazda part number EC0132240 or YL8Z3280EA. For tie rod ends, use Ford/Mazda part number EC0132280 or 5L843289AA. Important! When purchasing the ball joints, make sure the inner end (rack side) has M14x1.5 male thread and the outer end has M16x1.5 male thread.

Important! Read the installation manual before and after purchase. This manual offers a good overview of the necessary tools and work.