Skip to product information
Radium Engineering PCV Oil Catch Can Kit for 1998-2005 Mazda MX-5 Fluid Lock
Avatar 1 Avatar 2 Avatar 3
Igor Derenko, Joan Caballer and 3,000+ people trust us
USA-RAD-20-1336-FL

Radium Engineering PCV Oil Catch Can Kit for 1998-2005 Mazda MX-5 Fluid Lock

4.9 (+3000)
295,60€

Not sure if this part is compatible with your car?

Text us on WhatsApp. We'll check it for you before you buy.

Official brands
🔧 Compatible with complete Drift projects
💳 Secure payment
🇬🇧 24/7 Support

PRODUCT DESCRIPTION

Product details

COMPATIBILITY: Mazda MX-5 Miata 98-05

Radium Engineering catch cans feature oversized 10AN ORB ports, a 4AN ORB drain port, two-stage oil separation baffling, and an O-ring sealed dipstick. These kits include everything necessary for a complete installation. The catch can extracts oil and water condensation from the crankcase gases that would otherwise enter the intake manifold. Additionally, the closed system prevents unwanted oil fumes from entering the cabin. FEATURES: Effectively increases octane and engine performance by cleaner intake air. Prevents oil buildup on intake tract walls or intercooler, throttle body, intake manifold, etc. Excessive oil accumulation can indicate a damaged engine. Reduces hydrocarbon emissions. Capacity: 7 fl oz.

20-1336-FL CATCH CAN KIT, PCV, MAZDA MX-5 98-05, FLUID LOCK

This catch can mounts using existing holes and seamlessly integrates with surrounding components. The anodized aluminum bracket mounts behind the right headlight. NOTE: Due to clearance for pop-up headlights, these kits are not compatible with 1989-1997 Mazda MX-5 Miatas or Eunos Roadsters.

SAE quick connect fittings are included for both catch can ports.

The PCV catch can kit improves the performance of the crankcase ventilation system. The catch can installs inline between the PCV valve and the intake manifold. When intake manifold pressure is at or above atmospheric pressure, the PCV check valve closes, and therefore this hose experiences no flow. Conversely, PCV hoses will experience controlled vacuum when the engine is idling, steady state cruising, and decelerating. This would normally draw crankcase vapors, unburnt fuel, and oil sludge into the intake manifold immediately following high load operation.

INCLUDES: Fluid-Lock® Baffled Catch Can, Anodized Aluminum Bracket, SAE Quick Connect Hose Ends, SAE Quick Connect Fittings, Stainless Steel Mounting Hardware, 3/8" PCV Rubber Hose, 5/16" Heater Hose, Cable Ties, Spring Clamps.

Instructions PDF

Secure shopping

Secure shopping

Pay with total security and confidence.
Fast shipping

Fast shipping

Shipping to Spain and Europe, in 5-7 days.
Experts by your side

Experts by your side

Over 10 years in the automotive world.
Verified parts

Verified parts

Each reference designed for competition.

WE WORK WITH THE BEST BRANDS

WHY THETUNERLAB

We don't just sell parts. We live drift.

We have spent years building cars, racing, and testing the exact same parts that we sell.

01

Real experience

We test before we recommend.

02

Compatibility

We help you choose the right part.

03

Official brands

Only trusted manufacturers.

04

Technical support

Before and after the purchase.

+10 years

of passion for drifting

+30.000

available products

+5.000

satisfied customers

24/7

passion for motoring

Pilots who trust us
@mcolsa94
@mcolsa94 badge
Drift Driver
@pedrogarcia_drifter
@pedrogarcia_drifter badge
DriftSpain driver
@merida.drift
@merida.drift badge
DriftSpain driver
@thepucho
@thepucho badge
DriftSpain driver
@glebprotasov._
@glebprotasov._ badge
DriftSpain driver
@manucanizarest
@manucanizarest badge
DriftSpain driver
@adrian_08_drift
@adrian_08_drift badge
DriftSpain driver
@joancaballer
@joancaballer badge
DriftSpain driver
@xaviercaballer17drift
@xaviercaballer17drift badge
DriftSpain driver
@igor_derenko_
@igor_derenko_ badge
DriftSpain driver
@seeronoseer
@seeronoseer badge
DriftSpain driver
@mcolsa94
@mcolsa94 badge
Drift Driver
@pedrogarcia_drifter
@pedrogarcia_drifter badge
DriftSpain driver
@merida.drift
@merida.drift badge
DriftSpain driver
@thepucho
@thepucho badge
DriftSpain driver
@glebprotasov._
@glebprotasov._ badge
DriftSpain driver
@manucanizarest
@manucanizarest badge
DriftSpain driver
@adrian_08_drift
@adrian_08_drift badge
DriftSpain driver
@joancaballer
@joancaballer badge
DriftSpain driver
@xaviercaballer17drift
@xaviercaballer17drift badge
DriftSpain driver
@igor_derenko_
@igor_derenko_ badge
DriftSpain driver
@seeronoseer
@seeronoseer badge
DriftSpain driver

Products you might be interested in

Have any questions? We'll answer them here.

How do I know if the parts are compatible with my car?

Each product indicates compatible models in the product description. If you have any questions, you can contact us and we will help you choose your best option.

When will I receive my order?

-If the product is in stock, the usual delivery time is 2 to 5 working days.
-If the product is out of stock, the delivery time is 7 to 15 working days.

What kind of warranty do the products have?

All our products come with the manufacturer's official warranty and comply with current regulations.

Do you ship throughout Europe?

Yes. We ship orders to Spain and most European countries using specialized transport agencies.

How can I contact you?

You can contact our team via WhatsApp, email, or our website's contact form.

How much is shipping?

Shipping costs depend on the type of product, its weight, dimensions, and the destination country. In most cases, the amount is calculated automatically during the checkout process before the order is finalized.

For some products, especially large items or those with special characteristics, shipping costs may require a manual review. If the amount shown does not match the actual shipping cost, we will contact you before processing the order to inform you of the final cost and request your confirmation before proceeding. We will never charge any additional fees without your authorization.