Wisefab Front Narrow Drift Angle Lock Kit

The suspension kit raises the front roll center with lowered suspension, providing greater stiffness and allowing the removal of the front anti-roll bar (sway bar).
Usually, when cornering, the inner wheel has a greater angle than the outer one. In the case of drifting, this means a loss of speed and grip, and the manufacturer has corrected this for optimal performance.
At high steering angles, the front wheel will have positive camber, which is not a positive effect. This reduces front grip, and when turning, it creates a transition from the inner edge to the outer edge. This cannot be eliminated, but thanks to optimal geometry, it has been reduced as much as possible.
During drifting, when the steering angle is much greater, vibrations may occur on the steering wheel, even with the same geometry, and this can become problematic. Wisefab has changed the geometry so that it does not cause any handling problems.
In some suspension geometries, at large steering angles, the steering wheel may lock in an extreme position, and the driver will have to use a lot of force to turn it to the other side. This problem has been eliminated by the manufacturer.
The kit includes:
Steering knuckle accessories with hardware.
Lightweight lower control arms.
Assembled steering rods.
Adjustable rear mounting for the lower control arm.
Mounting instructions
Notes:
Wider fenders or fender flares are required for this kit.
Perfect fit under E36 fender with 18x8" ET45 wheel (225/45 R18)