Bosch Nuke Performance 1462cc 65mm EV14L Injector

Bosch 1462cc / 1500cc High Impedance injector, adapted to 65mm (EV14L) for the Nuke Performance Fuel Rail range.

This injector includes the necessary accessories for a Bosch EV14L injector (60-65mm o-ring to o-ring / 65mm o-ring center to center).

1462cc High Impedance injector from Bosch Motorsport

Also referred to as a 1500cc Bosch Injector

Matches the length of a Bosch EV14L injector

Top adapter with filter for extra protection

When ordering injectors, always check your fuel rail specifications to ensure that the injector is correct. Most Nuke Performance fuel rails use EV14L injectors, available from 630cc up to 2200cc.
Specifications for Bosch Motorsport 1462cc injector:

Bosch Part Number

0280158333 / Bosch -333

OEM Part Number

0 280 158 333

Type - no adapters included
EV14K 39mm (Compact)

Type - with adapters included
EV14L 65mm (Long)

Connector
Bosch JPT EV1 Minitimer Jetronic

Top / Bottom O-ring
14mm Viton / 14mm Viton

Resistance
8.5 Ohm

Flow Rate at 3 bar

1462 cc/min = 1000g/min = 132 lb/h at 3 bar

Fuel Compatibility
Petrol / E85 / M100*

Nozzle / Spray Pattern
Standard Tip / Single cone spray

For Motorsport Use
YES

Part No. / EAN
130-01-150 / 7340209508291

* Note: If using the injector with methanol, flush it with regular gasoline after use. Do not leave methanol in the injector for extended periods.

Bosch 1462cc Injector Capacity:

Test conditions may differ from actual use due to technical and equipment factors. However, this information helps understand the injector's performance and choose other fuel system components.

Max Static flow measured in a test environment

2 BAR (29 PSI)

N/A

3 BAR (43.5 PSI)

1450cc/min = 138.1 lb/h

4 BAR (58 PSI)

1690cc/min = 160.9 lb/h

5 BAR (78.5 PSI)

1900cc/min = 180.9 lb/h

6 BAR (88 PSI)

N/A

7 BAR (101.5 PSI)

N/A

Petrol (10% margin)

Turbocharged

Naturally Aspirated

1 Cylinder

1 x 197 = 197 hp

1 x 257 = 257 hp

4 Cylinder

4 x 197 = 788 hp

4 x 257 = 1028 hp

5 Cylinder
5 x 197 = 985 hp

5 x 257 = 1285 hp

6 Cylinder

6 x 197 = 1182 hp

6 x 257 = 1542 hp

8 Cylinder

8 x 197 = 1576 hp

8 x 257 = 2056 hp

E85 (10% margin)

Turbocharged

Naturally Aspirated

1 Cylinder

1 x 171 = 171 hp

1 x 214 = 214 hp

4 Cylinder

4 x 171 = 684 hp

4 x 214 = 856 hp

5 Cylinder

5 x 171 = 855 hp

5 x 214 = 1070 hp

6 Cylinder

6 x 171 = 1026 hp
6 x 214 = 1284 hp

8 Cylinder

8 x 171 = 1368 hp

8 x 214 = 1712 hp

Injector Calculation: The above figures are based on a 3 BAR (43.5 PSI) base pressure at idle, giving an overview of this injector's performance. Bosch 1462cc, 65mm (EV14L) Injector includes:

1pc Bosch Motorsport Injector (No. 0280158333)

1pc 14mm short injector adapter with filter (No. 135-01-101)

1pc 14mm short injector adapter without filter (No. 135-01-102)

1pc Bosch injector clip (No. 135-01-005)

Optional Flow Matched for optimized performance and even fuel delivery in high-performance applications.

We offer all our injectors flow-matched in 4, 5, 6, and 8-pack kits. Flow-matched injectors ensure even fuel delivery, optimizing performance, efficiency, and smoothness. Standard injectors can have flow variations, leading to uneven fuel distribution and reduced performance. We recommend flow-matched injectors for all high-performance or modified engines, where precision in fuel delivery is critical.

Bosch 1462cc, 65mm (EV14L) Injector, 4-pack flow-matched. Part No: 130-04-150

Bosch 1462cc, 65mm (EV14L) Injector, 5-pack flow-matched. Part No: 130-05-150

Bosch 1462cc, 65mm (EV14L) Injector, 6-pack flow-matched. Part No: 130-06-150

Bosch 1462cc, 65mm (EV14L) Injector, 8-pack flow-matched. Part No: 130-08-150