Nuke Performance Full Flow AN8 Straight PTFE Hose Fitting

Nuke Performance Full Flow PTFE Hose End Fittings. Available in AN-6, AN-8, AN-10, and AN-12. High-quality, lightweight full-flow hose end fittings for PTFE-lined fuel hoses. Nuke Performance offers a wide range of hose end fittings. With the PTFE line, you get the perfect solution for all types of fuels, including alcohol-based fuels like ethanol.

Safe for all types of fuels, including ethanol. For Nuke Performance Full Flow PTFE fuel hoses. Available in AN-6 / AN-8 / AN-10 / AN-12. Straight / 30 / 45 / 60 / 90 / 120 / 150 / 180 degrees. Includes an aluminum olive insert. Longer lifespan than conventional fuel hoses.

Nuke Performance's wide selection of hose end fittings is of the highest quality and available in sizes from AN-6 to AN-12 and in a variety that includes straight and 180-degree versions. The Full Flow PTFE fuel hose acts as an economical protection for your injectors, filters, and fuel pumps.

Motorsport black nylon braided PTFE-lined fuel hose. The Teflon inner lining resists all types of fuels, including alcohol-based fuels such as ethanol, methanol, and racing fuels. Nuke Performance PTFE fuel hose has a much longer lifespan as it does not degrade over time like conventional nitrile rubber fuel hoses. This protects your injectors, fuel filters, and, in the long run, your fuel pumps from clogging and damage caused by the dissolved interior of nitrile hoses. Nuke Performance PTFE fuel hose is carbonized for increased conductivity, which is crucial for motorsport fuel systems. Nuke Performance black nylon braided PTFE-lined fuel hose is available in various sizes.
The PTFE lining on the inside of the fuel hose acts as a vapor barrier. The Nuke Performance PTFE fuel hose features an internal Teflon (PTFE) lining that acts as a vapor barrier when using all types of fuels. This is especially useful when using alcohol fuels, which are typically transported through a traditional nitrile or rubber fuel hose. It is very practical for installing fuel hoses in the driver's compartment, as well as in the workshop between races and competition seasons.

Exceptional flow capacity and increased durability for motorsport. The Nuke Performance Full Flow PTFE line uses a full-flow design that allows the fuel system to be designed with minimal flow loss. Thanks to its three-layer design, it has a much smaller outer diameter than a conventional nitrile fuel hose. The PTFE lining prevents the hose from hardening and will not fracture or crack. This helps prevent fuel leaks and the odor that would occur when using a common nitrile fuel hose. AN-6 Full Flow PTFE Fuel Hose. Part Number: 820-02-106 - 820-02-606. AN-8 Full Flow PTFE Fuel Hose. Part Number: 820-02-108 - 820-02-608. AN-10 Full Flow PTFE Fuel Hose. Part Number: 820-02-110 - 820-02-610. AN-12 Full Flow PTFE Fuel Hose. Part Number: 820-02-112 - 820-02-612.

Developed in response to the high demands of global motorsport. In collaboration with motorsport teams around the world, this range of hose ends and fuel hoses is ready to provide you with the highest quality even in demanding conditions. The Full Flow range of hose fittings is manufactured with the same quality as all other parts in Nuke Performance's lightweight motorsport range. Nuke Performance quality is second to none!

Wide variety of tools and accessories: To make the installation of fittings and the fuel system as simple as possible, Nuke Performance offers a wide variety of practical tools and accessories for assembling fuel hoses. The V-shaped aluminum adjustable wrench will revolutionize the assembly of your hose ends. Aluminum Adjustable AN Wrench (AN-4 to AN-16) Part No.: 700-30-105. Aluminum AN Fitting Jaws (Part No.: 700-30-201). Aluminum AN Wrenches (AN-6/8/10/12) Part No.: 700-30-101/2/3/4. Replacement Aluminum Olive Inserts (Part No.: 810-20-106/8/10/12).

Nuke Performance PTFE Hose End / Fuel Hose Specifications. For more information on specifications, please refer to the product manual.

Hose End Series No.

810-01-106 - 810-18-112

Fuel Hose Series No.

820-02-106 - 820-02-612

Available Sizes

AN-6 / AN-8 / AN-10 / AN-12

Available Versions

Straight / 30 / 45 / 60 / 90 / 120 / 150 / 180

Fuel Compatibility

Gasoline, Methanol, Ethanol, E85, Racing Fuel, Diesel, Oil

Hose End Material
Anodized Aluminum Housing and Olive

Fuel Hose Inner Lining
PTFE (Teflon) Inner Lining

Fuel Hose Braiding
Stainless Steel and Nylon

Temperature Range

-70 °C to 250 °C (-94 °F to 480 °F)

Conductive Inner Lining
YES

For Motorsport Use
YES