AN10 Straight Connector for Nuke Performance PTFE Full Flow Hose

Nuke Performance Full Flow PTFE Hose End Fittings. Available in AN-6, AN-8, AN-10, and AN-12. High quality, lightweight, full flow hose end fittings for PTFE-lined fuel hose. Nuke Performance offers a wide range of hose end fittings. With the PTFE line, you will get the perfect solution for all types of fuel, including alcoholic fuels such as ethanol.

Safe for all types of fuel, including ethanol. For Nuke Performance Full Flow PTFE fuel hose. Available in AN-6 / AN-8 / AN-10 / AN-12. Straight / 30 / 45 / 60 / 90 / 120 / 150 / 180 degrees. Includes aluminum olive insert. Longer lifespan than a conventional fuel hose.

Nuke Performance's wide selection of hose end fittings are of the highest quality and available in sizes from AN-6 up to AN-12 and in a variety including straight and 180-degree versions. Full flow PTFE fuel hose works as economical protection for your injectors, filters, and fuel pumps.

Black nylon braided PTFE-lined fuel hose for motorsports. The inner Teflon lining resists all types of fuel, including alcoholic fuels such as ethanol, methanol, and race fuels. Nuke Performance's PTFE fuel hose has a much longer lifespan as it does not degrade over time like conventional nitrile rubber fuel hoses. This protects your injectors, fuel filters, and in the long run, your fuel pumps from clogging and damage caused by the dissolved interior of nitrile hoses. Nuke Performance's PTFE fuel hose is carbonized for increased conductivity, which is crucial for motorsport fuel systems. Nuke Performance's black nylon braided PTFE-lined fuel hose is available in various sizes.
The PTFE lining on the inside of the fuel hose acts as a vapor barrier. Nuke Performance PTFE fuel hose features an inner Teflon (PTFE) lining that acts as a vapor barrier when using all types of fuels. This is especially useful when using alcohol-based fuels, which would normally vent through a traditional nitrile or rubber fuel hose. This is very practical for installing fuel hoses inside the driver's compartment, as well as in the workshop between races and race seasons.

Exceptional flow capacity and increased durability for motorsports. The Nuke Performance Full Flow PTFE line utilizes a full flow design allowing the fuel system to be designed with minimal flow loss. Thanks to its three-layer design, it has a much smaller outer diameter than a conventional nitrile fuel hose. The PTFE lining prevents the hose from hardening and will not fracture or crack. This helps prevent fuel leaks and the odor that would occur when using a common nitrile fuel hose. AN-6 Full Flow PTFE Fuel Hose. Part No: 820-02-106 - 820-02-606. AN-8 Full Flow PTFE Fuel Hose. Part No: 820-02-108 - 820-02-608. AN-10 Full Flow PTFE Fuel Hose. Part No: 820-02-110 - 820-02-610. AN-12 Full Flow PTFE Fuel Hose. Part No: 820-02-112 - 820-02-612.

Developed in response to the high demands of global motorsports. In cooperation with motorsports teams worldwide, this range of hose ends and fuel hoses is ready to provide you with the highest quality even under demanding conditions. The Full Flow range of hose fittings is manufactured with the same quality as all other parts of Nuke Performance's lightweight range for motorsports. Nuke Performance quality is unsurpassed!

Wide variety of tools and accessories: To make the installation of fittings and the fuel system as easy as possible, Nuke Performance offers a wide variety of practical tools and accessories for assembling fuel hoses. The V-shaped adjustable aluminum wrench will revolutionize the assembly of your hose ends. Adjustable aluminum AN wrench (AN-4 to AN-16) Part No: 700-30-105. Aluminum jaws for AN fittings (Part No: 700-30-201). Aluminum AN wrenches (AN-6/8/10/12) Part No: 700-30-101/2/3/4. Replacement aluminum olive inserts (Part No: 810-20-106/8/10/12).

Nuke Performance PTFE Hose End / Fuel Hose Specifications. For more information on specifications, please refer to the product manual.

Hose end series No.

810-01-106 - 810-18-112

Fuel hose series No.

820-02-106 - 820-02-612

Available sizes

AN-6 / AN-8 / AN-10 / AN-12

Available versions

Straight / 30 / 45 / 60 / 90 / 120 / 150 / 180

Fuel compatibility

Gasoline, methanol, ethanol, E85, race fuel, diesel, oil

Hose end material
Anodized aluminum housing and olive

Fuel hose inner lining
PTFE (Teflon) inner lining

Fuel hose braiding
Stainless steel and nylon

Temperature range

-70 °C to 250 °C (-94 °F to 480 °F)

Conductive inner lining
YES

For motorsports use
YES