{"product_id":"conector-de-extremo-de-manguera-de-ptfe-de-flujo-completo-nuke-performance-de-150-grados-an8","title":"Nuke Performance 150-Degree AN8 Full Flow PTFE Hose End Fitting","description":"\u003cp\u003eNuke Performance Full Flow PTFE Hose End Fittings. Available in AN-6, AN-8, AN-10, and AN-12. High-quality lightweight full flow hose end fittings for PTFE-lined fuel hoses. Nuke Performance offers a wide range of hose end fittings. With the PTFE line, you will get the perfect solution for all types of fuels, including alcoholic fuels such as ethanol.\u003c\/p\u003e\n\n\u003cp\u003eSafe for all types of fuels, including ethanol. For Nuke Performance Full Flow PTFE Fuel Hoses. Available in AN-6 \/ AN-8 \/ AN-10 \/ AN-12. Straight \/ 30 \/ 45 \/ 60 \/ 90 \/ 120 \/ 150 \/ 180-degree. Include an aluminum olive insert. Longer lifetime than a conventional fuel hose.\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance's wide selection of hose end fittings are of the highest quality and available in sizes from AN-6 up to AN-12 and in a range including straight and 180-degree versions. The Full Flow PTFE Fuel Hose works as an economic protection for your injectors, filters, and fuel pumps.\u003c\/p\u003e\n\n\u003cp\u003eBlack nylon braided PTFE-lined fuel hose for motorsports. The inner Teflon lining withstands all types of fuels, including alcoholic fuels such as ethanol, methanol, and race fuels. The Nuke Performance PTFE fuel hose has a much greater lifetime as it does not degrade over time as conventional nitrile rubber fuel hoses. This protects your injectors, fuel filters, and in the long run, your fuel pumps from clogging and damage caused by the dissolving inside of nitrile hoses. The Nuke Performance PTFE fuel hose is carbonized for increased conductivity which is crucial for motorsport fuel systems. The Nuke Performance black nylon braided PTFE-lined fuel hose is available in several sizes.\u003cbr\u003e\nPTFE lining on the inside of the fuel hose acts as a vapor barrier. The Nuke Performance PTFE Fuel Hose features an inner Teflon (PTFE) lining that acts as a vapor barrier when using all types of fuels. This becomes especially handy when using alcohol-based fuels, which are normally carried through a traditional nitrile or rubber fuel hose. This is very practical for installing fuel hoses into the driver's compartment, as well as in the workshop between races and race seasons.\u003c\/p\u003e\n\n\u003cp\u003eExceptional flow capacity and increased durability for motorsports. The Nuke Performance Full Flow PTFE line utilizes a full flow design that allows the fuel system to be designed with minimal flow loss. Thanks to its three-layer design, it has a much smaller outer diameter than a conventional nitrile fuel hose. The PTFE lining prevents the hose from hardening and will not fracture or crack. This helps prevent fuel leaks and the odor that would occur when using a common nitrile fuel hose. Full Flow PTFE Fuel Hose AN-6. Part No: 820-02-106 - 820-02-606. Full Flow PTFE Fuel Hose AN-8. Part No: 820-02-108 - 820-02-608. Full Flow PTFE Fuel Hose AN-10. Part No: 820-02-110 - 820-02-610. Full Flow PTFE Fuel Hose AN-12. Part No: 820-02-112 - 820-02-612.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped in response to the high demands of world motorsports. In collaboration with motorsport teams worldwide, this range of hose ends and fuel hoses is ready to provide you with the highest quality even under demanding conditions. The Full Flow range of hose fittings is manufactured with the same quality as all other parts of Nuke Performance's lightweight motorsport range. Nuke Performance quality is unsurpassed!\u003c\/p\u003e\n\n\u003cp\u003eWide variety of tools and accessories: To make the installation of fittings and the fuel system as easy as possible, Nuke Performance offers a wide variety of practical tools and accessories for assembling fuel hoses. The V-shaped adjustable aluminum wrench will revolutionize the assembly of your hose connections. Adjustable AN aluminum wrench (AN-4 to AN-16) Part No: 700-30-105. AN fitting aluminum vise jaws (Part No: 700-30-201). AN aluminum wrenches (AN-6\/8\/10\/12) Part No: 700-30-101\/2\/3\/4. Replacement aluminum olive inserts (Part No: 810-20-106\/8\/10\/12).\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance Full Flow PTFE Hose Fittings are available in AN-6, AN-8, AN-10, and AN-12. The matching PTFE braided fuel hose is available in pre-cut lengths of 1m, 2m, 4m, and 6m (3-20 ft).\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance PTFE Hose Fittings \/ Fuel Hose Specifications. For more information regarding specifications, see the product manual.\u003c\/p\u003e\n\n\u003cp\u003eHose end series No.\u003c\/p\u003e\n\n\u003cp\u003e810-01-106 - 810-18-112\u003c\/p\u003e\n\n\u003cp\u003eFuel hose series No.\u003c\/p\u003e\n\n\u003cp\u003e820-02-106 - 820-02-612\u003c\/p\u003e\n\n\u003cp\u003eAvailable sizes\u003c\/p\u003e\n\n\u003cp\u003eAN-6 \/ AN-8 \/ AN-10 \/ AN-12\u003c\/p\u003e\n\n\u003cp\u003eAvailable versions\u003c\/p\u003e\n\n\u003cp\u003eStraight \/ 30 \/ 45 \/ 60 \/ 90 \/ 120 \/ 150 \/ 180\u003c\/p\u003e\n\n\u003cp\u003eFuel compatibility\u003c\/p\u003e\n\n\u003cp\u003eGasoline, Methanol, Ethanol, E85, Race Fuel, Diesel, Oil\u003c\/p\u003e\n\n\u003cp\u003eHose end material\u003cbr\u003e\nAnodized aluminum housing and olive\u003c\/p\u003e\n\n\u003cp\u003eFuel hose inner lining\u003cbr\u003e\nPTFE (Teflon) inner lining\u003c\/p\u003e\n\n\u003cp\u003eFuel hose braiding\u003cbr\u003e\nStainless steel and nylon\u003c\/p\u003e\n\n\u003cp\u003eTemperature range\u003c\/p\u003e\n\n\u003cp\u003e-70 °C to 250 °C (-94 °F to 480 °F)\u003c\/p\u003e\n\n\u003cp\u003eConductive inner lining\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eFor motorsport use\u003cbr\u003e\nYES\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688313827668,"sku":"NP-810-15-108","price":39.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/full-flow-ptfe-hose-end-fitting-150-degree-an8.jpg?v=1788475825","url":"https:\/\/www.thetunerlab.com\/en\/products\/conector-de-extremo-de-manguera-de-ptfe-de-flujo-completo-nuke-performance-de-150-grados-an8","provider":"Thetunerlab","version":"1.0","type":"link"}