JRspec 90° Aluminum Elbow, 22mm, 60cm, "L" type.

LIGHTNING STAGE ONE Nitrous Solenoid with a .063 orifice. Capable of supporting 200 HP. Draws a maximum of 11 amps. Has 1/8" NPT inlets and outlets and also a built in 1/8" NPT purge port.

NX Lightning series solenoids offer excellent flow, weigh less, and look great. The key to maximizing nitrous horsepower is to keep the nitrous in a liquid state until it is injected into the engine. Sharp turns cause turbulence in the nitrous flow, which causes gas bubbles. Expansion areas also cause nitrous to change to a gas. Liquid nitrous makes more power than gaseous nitrous! NX Lightning solenoids feature a raised inlet and a lower outlet, which eliminates up to four 90 degree turns and an expansion area in the solenoid body. The result is more power! Lightning series solenoids are CNC machined from lightweight aluminum and topped with carbon fiber housings for maximum weight reduction. Lightning series nitrous solenoids feature a bypass port that allows a purge valve to be connected directly to the solenoid body. The nitrous solenoid. Connecting the purge valve to the nitrous solenoid body not only improves aesthetics, but also ensures that no air is trapped inside.

Note: We also recommend that you check out the NX Lightning series fuel solenoids. These feature a bypass port that allows a small return line to be connected to the tank. This eliminates lean mixture spikes caused by air trapped between the fuel pressure regulator and the solenoid.