{"product_id":"canchecked-display-mfd32-gen2-para-audi-a6-a7-c7-4g-rhd-2011-2018","title":"CANchecked Display MFD32 Gen2 for Audi A6 A7 C7 (4G) RHD 2011-2018","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your Audi A6\/A7 C7 (4G): perfectly integrated and with all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless integration: The vehicle-specific frame allows air to pass through the display.\u003cbr\u003e\nCAN bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003cbr\u003e\nGear indicator: Directly via the CAN bus or calculated from speed and RPM.\u003cbr\u003e\nTouch display: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable alarms: Easily configure and activate customizable alarms. For example, receive an important warning when exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData logging: Record and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance meter: Measure your 0-100, 100-200, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003c\/p\u003e\n\n\u003cp\u003eDTC*: Read and clear error codes from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views:\u003cbr\u003e\nConfigure your own page or choose from several predefined views.\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by drag and drop.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS):\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS software, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (both CAN Bus and internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Here is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, fuel pump pre-supply pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda value, injection time, short-term lambda trim, long-term lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 duty cycle in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later.\u003c\/p\u003e\n\n\u003cp\u003eScope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the vent insert for right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature Sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure Sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost Pressure Sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Features\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate the relationship between sensors. The user table allows you to generate additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External shift light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963500441940,"sku":"CC31045","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC31045_01_0a9422f6-4812-4bab-a3c6-e3aff3ef3ac7.jpg?v=1788474024","url":"https:\/\/www.thetunerlab.com\/en\/products\/canchecked-display-mfd32-gen2-para-audi-a6-a7-c7-4g-rhd-2011-2018","provider":"Thetunerlab","version":"1.0","type":"link"}