{"product_id":"canchecked-display-mfd28-gen2-para-seat-leon-cupra-5f-rhd-12-20","title":"CANchecked Display MFD28 Gen2 for Seat Leon Cupra 5F RHD 12-20","description":"\u003cp\u003eMFD28 Gen2 specific for your Seat Leon\/Cupra 5F: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the ventilation grille into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain features\u003c\/p\u003e\n\n\u003cp\u003ePerfect integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear indicator: Directly via Can Bus or calculated from speed and rpm.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images or start animations.\u003cbr\u003e\nAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCan switching: Use the display as a keypad and send your own Can messages to the bus.\u003cbr\u003e\nCustomizable alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData logging: Record and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance meter: Measure your 0-100 km\/h, 100-200 km\/h and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. In addition, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eCompatible values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All sensors that are queried are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in each shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated in the ventilation insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nProtective film for the screen (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors and speed limits and colors can be set directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and record ethanol content and temperature directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced features\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963479535956,"sku":"CC36031","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC36031_01_84d29cc7-cec0-4a6e-aba3-5db87dd12f12.jpg?v=1788502758","url":"https:\/\/www.thetunerlab.com\/en\/products\/canchecked-display-mfd28-gen2-para-seat-leon-cupra-5f-rhd-12-20","provider":"Thetunerlab","version":"1.0","type":"link"}