CANchecked BMR01 - Wireless Brake Monitoring with Receiver

TMU and BMU Wireless Multichannel Infrared Sensors

Our TMU and BMU wireless multichannel infrared sensors are advanced wireless multichannel infrared sensors for tire or brake temperature monitoring, with an external receiver and CAN connectivity. Fully configurable with 8 or 4 temperature channels per tire or brake disc, and a refresh rate of up to 50 Hz. Rechargeable battery with 15 hours of track use.

Knowing the evolution of surface temperature during a lap is crucial for suspension adjustment, driver training, and setup selection. As it is a wireless system, its installation is very simple and can be moved from one vehicle to another in a matter of minutes.
Receiver box - Technical specifications

Supply voltage: 5-20 V

Current consumption: 50 mA

Cable: 0.5 m AWG22

Connector: DTM04-4P (DTM06-4S included)

Communication

CAN standard: 2.0A (11-bit ID) or 2.0B
Bit rate: 500 kbps (standard) / 1 Mbps
Byte order: Big Endian (most significant bit first)

CAN termination: none
Base CAN ID: Standard 0x310 (tire) / 0x210 (brake), configurable via CAN

Temperature conversion: -200 °C offset, 0.1 °C/bit

Important information

The TMR01 or BMR01 is the single receiver box for our wireless tire and brake temperature sensors. When you purchase our TMU04 or BMU04 kit, this receiver box is always included and does not need to be purchased separately. If you purchase individual TMU01 or BMU01 sensors, you will need this receiver box for them to operate.

This system is ideal for monitoring tire and brake temperatures, and can improve your vehicle's performance and safety on the track.