PRODUCT DESCRIPTION
Product details
With the CANchecked MFD15 Gen2 display for your AUDI A3 8V, you always have all relevant values in view.
The MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. Thanks to its 52mm outer diameter, the display is compatible with commercially available interior bezels, even without a specific vehicle holder. It is operated via two push buttons, located on the windshield, or via the optional rotary knob.
Main features
Compact design: 52mm diameter and only 12.5mm deep.
Indicator: The front LED on the display can be used as an indicator or warning LED, and is freely configurable.
Can Bus: Compatible with Can Bus ECUs, OBD2 from 2008 and deep values for VW/Audi from 2008, or create your own Can stream.
WLAN: Connect to your smartphone or PC and perform all subsequent steps via our web interface.
Additional inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.
Predefined alarms: Predefined alarms can be easily activated and customized. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees. Customization: Use your own logo or background image to personalize your MFD15 Gen2.
Online Logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.
Flexible Fuel*: Display ethanol content and temperature on the screen.
Can Switching*: Switch between cans using the buttons on the display and send the readings from your analog inputs to the CAN bus.
Different Views
Choose up to eight pages with different views and customize the display to best suit you and your vehicle:
Analog pointer
Double value
Gear indicator
Quad values
Hex values
Bar + double display
Round display
Bar chart (double horizontal)
Performance meter
Bar chart (1 to 6 vertical bars)
Single value
Online DSS - orDSS
New to our MFD15 Gen2, you can access the device via WLAN. This allows you to configure the MFD15 Gen2 from your smartphone or PC.
With oDSS, you can fully configure your display, log values (license required), upload your own start image, and update the display.
Supported Values
A frequently asked question from our customers is: "Which values can I request from my ECU?" The answer: "ALL". Our MFD15 Gen2 supports ISO 11898-2 and SAE J2284.
ECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is essential, even in DBC file format that can be imported via our DSS. As a customer, you can access our extensive list of compatible ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.
OBD2 queries via CAN Bus (11-bit/29-bit) are also implemented. Vehicle-specific protocols such as UDS or TP2 are also available.
Included by default: - OBD2 - 11 & 29-bit - Ecumaster - Classic & Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 & 3
If the desired ECU is not listed, you can download or request the corresponding TRI/TRX from our database.
