Fueling for Mazda FD RX7 with Radium Engineering microfibre filter

Radium Engineering's fuel hanger allows the use of 1, 2 or 3 high pressure pumps and 1 lift pump in the factory Mazda FD RX7 fuel tank. It is compatible with the following models: Mazda FD RX-7 93-95 (US) and Mazda FD RX-7 92-02 (JDM).

Fuel Feed Kits:

Fuel Hanger Feed Kit 20-0455-0X, FD RX7. The feed kits use high flow -8AN fuel hoses.
A 1/2" Radium PCV/fuel hose runs from the fuel pump hanger outlet to a Radium Engineering fuel filter attached to the rear subframe. From there, a prefabricated -8AN PTFE feed line runs to the engine bay, where the user must adapt the 45-degree hose end to their specific fuel system. The fuel lines do not interfere with the factory fuel pump cover or any suspension-related parts. No cutting or drilling is required to route the feed line through the fuel tank.

The included Radium Engineering fuel filter assembly mounts to the rear subframe under the vehicle using a bolt-on machined aluminum bracket specifically designed for the FD RX7.

The filter mounts through a Radium Engineering heat exchanger to keep fuel temperatures low. Depending on the kit selected (-01, -03, -05), the fuel filter will be assembled with one of three different elements.

INCLUDES: Fuel filter (stainless steel -03 or glass microfiber -05), fuel filter heat exchanger bracket (laser etched graphics may vary), FD RX7 fuel filter bracket, 8AN. PTFE fuel feed hose - 1/2" Radium PCV/fuel hose - Black 8AN adapter fittings - Black 8AN hose ends - Stainless steel hardware