{"title":"Sistema de combustible \/ Depósitos de combustible","description":null,"products":[{"product_id":"soporte-de-combustible-para-mitsubishi-lancer-evolution-x-08-15-radium-engineering","title":"Radium Engineering Fuel Hanger for 08-15 Mitsubishi Lancer Evolution X","description":"\u003cp\u003e20-0642-00 Fuel Pump Hanger, EVO X, Pumps not included, Walbro F90000267\/274\/285\u003c\/p\u003e\n\n\u003cp\u003eGENERAL DESCRIPTION\u003c\/p\u003e\n\n\u003cp\u003eThe new Radium Engineering fuel pump hanger for the Mitsubishi EVO X has been redesigned to improve fuel pickup and facilitate installation. It completely replaces the factory fuel pump module inside the tank and allows for the use of one or two aftermarket fuel pumps. The original level sensor, fuel temperature sensor, and tank pressure sensor are retained to maintain factory functionality. Please note that the product may differ slightly from what is shown in the photos and videos.\u003c\/p\u003e\n\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\n\u003cp\u003e- 8AN ORB female pump outlet port\u003c\/p\u003e\n\n\u003cp\u003e- 6AN ORB female return port\u003c\/p\u003e\n\n\u003cp\u003e- Collector box with one-way fill valve\u003c\/p\u003e\n\n\u003cp\u003e- Venturi jet pump siphon\u003c\/p\u003e\n\n\u003cp\u003e- Unified fuel pump output\u003c\/p\u003e\n\n\u003cp\u003e- High-current electrical connections\u003c\/p\u003e\n\n\u003cp\u003e- Black anodized adapters\u003c\/p\u003e\n\n\u003cp\u003e- Fuel level and temperature sensor bracket\u003c\/p\u003e\n\n\u003cp\u003e- Compatibility with dual fuel pumps\u003c\/p\u003e\n\n\u003cp\u003e- Stainless steel hardware and clamps\u003c\/p\u003e\n\n\u003cp\u003e- Compatibility with alternative fuels\u003c\/p\u003e\n\n\u003cp\u003eINSTALLATION\u003c\/p\u003e\n\n\u003cp\u003eFor direct connection to OEM fuel lines, adapters (shown installed below) are included in all configurations.\u003c\/p\u003e\n\n\u003cp\u003eThe fuel hanger can also be used with the included 8AN and 6AN adapters (shown below) to install aftermarket -AN type hoses.\u003c\/p\u003e\n\n\u003cp\u003eRadium Engineering recommends upgrading the feed and return lines when using multiple pumps.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: There is an OEM pressure sensor (Mitsubishi 8651A025) on the top cap to comply with North American emissions standards. For international vehicles that do not include this part as standard, the EVO X 20-0421 fuel tank pressure plug is required.\u003c\/p\u003e\n\n\u003cp\u003eAVOID FUEL STARVATION\u003c\/p\u003e\n\n\u003cp\u003eThe kit includes a one-piece anodized aluminum collector box that facilitates installation and keeps fuel trapped around the pump inlet(s). As shown below, it incorporates a 355 L\/h one-way fill valve at the bottom of the collector box, which allows fuel to enter, but not to exit. The collector box is constantly replenished with fuel returning from the pressure regulator.\u003c\/p\u003e\n\n\u003cp\u003eNOTES ON THE VENTURI JET PUMP\u003c\/p\u003e\n\n\u003cp\u003e1. The original venturi jet pump in the return line creates a restriction with the stock EVO X fuel pump module.\u003c\/p\u003e\n\n\u003cp\u003e2. Radium Engineering has redesigned the siphon system to eliminate this restriction, maintaining fuel recovery efficiency. This means that higher-flow pumps can be used without fuel pressure issues.\u003c\/p\u003e\n\n\u003cp\u003e3. Depending on fuel pressure, the venturi jet pump consumes between 15 and 45 L\/h. Please account for this fuel loss when sizing fuel pumps.\u003c\/p\u003e\n\n\u003cp\u003e4. If it is important that fuel pressure remains constant after shutting off the engine, install one of these check valves somewhere in the fuel system.\u003c\/p\u003e\n\n\u003cp\u003eNOTES ON PUMP CONFIGURATION\u003c\/p\u003e\n\n\u003cp\u003eFor configurations with \"Pumps not included\":\u003c\/p\u003e\n\n\u003cp\u003e-This option includes enough components to use 1 or 2 fuel pumps. Depending on the setup, some parts will not be used.\u003c\/p\u003e\n\n\u003cp\u003e-A flexible fuel filter like this (HERE) must be used for a proper fit.\u003c\/p\u003e\n\n\u003cp\u003eFor configurations with \"Pumps included\":\u003c\/p\u003e\n\n\u003cp\u003e-The unit will arrive ready to install, requiring only minimal assembly. If the unit is purchased with 1 pump included, additional parts will be needed to install a second pump.\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688014623060,"sku":"USA-RAD-20-0642-00","price":648.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/fuel-hanger-mitsubishi-lancer-evolution-x-08-15-radium-engineering_6.jpg?v=1788963985"},{"product_id":"pyrotect-elite-de-15-galones-5678-litros-con-la-unidad-nuke-performance-cfc","title":"15 gallon \/ 56.78 liter Pyrotect Elite with Nuke Performance CFC unit.","description":"\u003cp\u003ePyrotect PyroCell Elite fuel cells are lightweight and FIA\/FT3 approved for major motorsport associations.\u003c\/p\u003e\n\n\u003cp\u003eThey feature an ultra-durable dual-layer urethane fabric bladder, combined with the Nuke Performance CFC unit: an easy-to-install fuel pump hanger with an integrated surge tank. The most efficient and lightweight solution on the market, used by motorsport teams worldwide and compatible with all alcohol fuels, such as ethanol.\u003c\/p\u003e\n\n\u003cp\u003eUltralight fuel cell\u003c\/p\u003e\n\n\u003cp\u003eFIA approved for all types of motorsport\u003c\/p\u003e\n\n\u003cp\u003e100% E85 compatible\u003c\/p\u003e\n\n\u003cp\u003eUrethane fabric bladder, for motorsport use\u003c\/p\u003e\n\n\u003cp\u003eAvailable in various sizes to suit all needs\u003c\/p\u003e\n\n\u003cp\u003eIntegrated 2-liter fuel surge tank function\u003c\/p\u003e\n\n\u003cp\u003eCompatible with single or dual high-pressure fuel pumps\u003c\/p\u003e\n\n\u003cp\u003eLow-profile fuel filler cap with integrated rollover valve\u003c\/p\u003e\n\n\u003cp\u003eAN-10 outlet \/ AN-8 return, fittings included\u003c\/p\u003e\n\n\u003cp\u003eHigh-quality Pyrotect PyroCell Elite fuel cells are the best on the market. Manufactured from ultra-durable dual-layer urethane fabric, with internal foam baffles and the integrated Nuke Performance CFC unit, they eliminate the need for an external surge tank, which is essential for fuel injection systems. The tank is safe for all fuel types, including ethanol and methanol.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated 2-liter surge tank, machined fuel pump bracket for 1 or 2 pumps. The Pyrotect Elite fuel cell with the Nuke Performance CFC unit includes the unique Nuke Performance Competition Fuel Cell unit as a replacement for the filler plate. The CFC unit is the perfect solution for a simplified, high-performance fuel system where safety is paramount. Thanks to the integrated surge tank, this setup eliminates the need for a space-consuming external tank. With all necessary fuel pumps mounted inside the fabric fuel bladder itself, this is all you need. This frees up space and weight, and increases safety since fewer fuel line connections are required and no external fuel pumps are used. Internal high-pressure fuel pumps, for any requirement between 200 and 2000 hp.\u003c\/p\u003e\n\n\u003cp\u003ePyrotect Elite fuel cells include the unique Nuke Performance CFC unit with integrated surge tank and fuel pump bracket. They are compatible with single or dual high-pressure fuel pumps from Deatschwerks, AEM, Ti Automotive, Walbro, Bosch, Fuelab, Aeromotive, and many more. They fit all common 39mm fuel pumps, as well as larger ones like the Deatschwerks DW400, Walbro GST400\/450\/520, Bosch BR540, and Aeromotive Stealth 450. One fuel pump is mounted inside the tank on a height-adjustable aluminum bracket, and one or two pumps are mounted on a machined aluminum bracket inside the surge tank. This solution is ready to provide constant fuel flow for power levels between 200 and 2000 horsepower, with no fuel starvation, even in demanding driving conditions, thanks to the internal surge tank and the Pyrotect foam baffling system.\u003c\/p\u003e\n\n\u003cp\u003eThe Pyrotect Elite fuel cell with the Nuke Performance CFC unit is compatible with most common fuel pumps. Together with Nuke Performance fuel pump mounting kits, configuring a high-performance fuel system has never been easier.\u003c\/p\u003e\n\n\u003cp\u003eHow are the fuel pumps mounted in the Pyrotect PyroCell Elite?\u003c\/p\u003e\n\n\u003cp\u003eThe single fuel pump mounted in the bladder acts as a lift pump, ensuring that the high-pressure fuel pumps inside the oversized 2-liter (0.53 gallon) surge tank always have enough fuel to maximize flow and minimize the risk of fuel starvation, which can severely damage the engine. For more information, please consult the product manual. The CFC unit is delivered with everything needed to install the fuel pumps of your choice, but we recommend adding one of our fuel pump mounting kits for optimal operation. All fuel pumps are mounted securely in any condition thanks to the machined brackets.\u003c\/p\u003e\n\n\u003cp\u003eSupplied with all necessary fittings for a quick and easy installation.\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance CFC unit includes two connection options: an AN-10 (7\/8 UNF) to AN-8 male fitting and an AN-10 male fitting, plus an AN-8 (3\/4 UNF) to AN-8 male return fitting. Using the large, high-flow AN-10 outlet integrates the internal fuel pumps into a single fuel line, minimizing the need for external equipment, hoses, and fittings. The rollover-protected vent fittings are AN-6 and can be replaced with AN-6 to AN-10 when needed. Additional AN-6 to AN-12 fittings are sold separately as accessories.\u003c\/p\u003e\n\n\u003cp\u003eOutlet connectors:\u003c\/p\u003e\n\n\u003cp\u003eAN-10 (7\/8 UNF) to AN-8 male. Part No.: 700-01-116\u003c\/p\u003e\n\n\u003cp\u003eAN-10 (7\/8 UNF) to AN-10 male. Part No.: 700-01-116\u003c\/p\u003e\n\n\u003cp\u003eAN-10 (7\/8 UNF) to AN-12 male. Part No.: 700-01-116\u003c\/p\u003e\n\n\u003cp\u003eReturn and vent connectors:\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-6 male. Part No.: 700-01-101\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-8 male. Part No.: 700-01-102\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-10 male. Part No.: 700-01-103\u003c\/p\u003e\n\n\u003cp\u003eFull foam baffles and durable dual-coated fabric bladder. Pyrotect Elite fuel cells, made in the USA, include factory-modified internal foam baffles, tailored to the specific mounting needs of the Nuke Performance CFC unit. The durable urethane bladder, encased in a lightweight aluminum container, is much safer than simpler solutions like saving cells and welded aluminum cells. The Pyrotect Elite series is among the safest fuel cells on the market today and has been developed from a long history in professional motorsport. Equipped with an ultra-durable dual-layer urethane fabric bladder and an aluminum container, it is available in various sizes, from 8 to 26 gallons (30 to 98 liters). With the Nuke Performance CFC unit, the only thing needed between the fuel cell and the engine is a fuel filter, just like in a standard fuel system. The internal bladder is completely safe for all types of fuels, but if used with alcohol fuel, it should not be left stored for long periods without first rinsing it with non-alcohol fuel.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped, designed, and manufactured in Sweden. The Pyrotect Elite fuel cell with the Nuke Performance CFC unit is delivered as a perfect combination: a modern Pyrotect bladder-type fuel cell and the unique Nuke Performance CFC unit, developed, designed, and manufactured in Sweden with the highest quality, the same hallmark that characterizes the other parts of the Nuke Performance lightweight range for motorsports. Nuke Performance quality is second to none!\u003c\/p\u003e\n\n\u003cp\u003eMade to order, approximate lead time: 3 weeks. All Pyrotect fuel cells are made to order, ensuring current FIA approval and preventing you from purchasing an old or stocked tank. Lead time is approximately 3 weeks after placing the order.\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance and Pyrotect fuel cells are the result of an official, international collaboration between both manufacturers. Pyrotect fuel cells, designed specifically for the CFC unit, carry both brand names. If ordering a fuel cell directly from Pyrotect, be sure to indicate that it is designed for use with the Nuke Performance CFC unit. The Pyrotect Elite CFC fuel cell kit includes: 1 Pyrotect Elite fuel bladder (select size when ordering), 1 FIA-certified lightweight Pyrotect aluminum container, 1 Nuke Performance Competition fuel cell unit, 1 AN-10 (7\/8 UNF) to AN-10 male outlet connector, 1 AN-8 (3\/4 UNF) to AN-8 male return connector, 1 AN-8 (3\/4 UNF) to AN-6 male vent safety valve.\u003c\/p\u003e\n\n\u003cp\u003ePyrotect Elite Fuel Cell Specifications\u003c\/p\u003e\n\n\u003cp\u003e8 Gallon Fuel Cell. Part number:\u003c\/p\u003e\n\n\u003cp\u003e150-06-08\u003c\/p\u003e\n\n\u003cp\u003eLength:\u003c\/p\u003e\n\n\u003cp\u003e527 mm (20.75”)\u003c\/p\u003e\n\n\u003cp\u003eDepth:\u003c\/p\u003e\n\n\u003cp\u003e308 mm (12.12”)\u003c\/p\u003e\n\n\u003cp\u003eHeight:\u003c\/p\u003e\n\n\u003cp\u003e219 mm (8.62”)\u003c\/p\u003e\n\n\u003cp\u003eWeight:\u003c\/p\u003e\n\n\u003cp\u003eNot available (including CFC unit)\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity:\u003c\/p\u003e\n\n\u003cp\u003e30.28 liters (8 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08 203 mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003e10 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-10\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e620 mm (25.62”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e257 mm (10.12”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e257 mm (10.12”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e37.85 liters (10 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003e12 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-12\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e502 mm (19.76”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e437 mm (17.20”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e234 mm (9.21”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e45.42 liters (12 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003e15 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-15\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e622 mm (24.5\")\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e450 mm (17.75\")\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e241 mm (9.5\")\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e56.78 liters (15 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003e17 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-17\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e511 mm (20.12\")\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e435 mm (17.12\")\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e324 mm (12.75”)\u003c\/p\u003e\n\u003c!--nl-- \u003e\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e64.35 liters (17 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12 305 mm \/ 12\"\u003c\/p\u003e\n\n\u003cp\u003e18 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-18\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e711 mm (28.0”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e435 mm (17.12”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e251 mm (9.87”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e68.13 liters (18 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003e22 Gallon Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-06-22\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e864 mm (34.0”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e445 mm (17.5”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e241 mm (9.5”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003eNot available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity\u003c\/p\u003e\n\n\u003cp\u003e83.27 liters (22 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensor\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003eNo modifications required before installation. When ordering, the Pyrotect fuel cell is manufactured to specifications for a perfect fit with the CFC unit. The internal foam baffle is cut to the exact size for the fuel pump and leaves enough room for the internal surge tank. No modifications are needed to the fuel cell and it is delivered with all necessary documentation for its FIA approval. Technical Information: • Includes lightweight aluminum container. • Delivered without top plate, ready for the CFC unit. • Ultra-durable dual-layer urethane fabric bladder. • 6x10\" filler plate mount with 24-bolt pattern. • Delivered with the Nuke Performance CFC unit. • Approved by FIA\/FT3-1999. • E85 suitable; must be emptied if stored. • No modifications required prior to installation. • Does not include fuel pump.\u003cbr\u003e\nFIA Certification: FIA-certified fuel cells have a 5-year service life and can be recertified for an additional 2 years, up to a maximum of 7 years from the date of manufacture. Fuel cells must be sent to Pyrotect for recertification. To comply with FIA regulations, the fuel cell bladder must be installed inside the included aluminum container. The dimensions indicated on our website correspond to the included container. Custom-designed Pyrotect fuel cells: For custom-designed Pyrotect fuel cells, please contact us directly for a quote. Integrated Nuke Performance CFC unit. Measurements:\u003c\/p\u003e\n\n\u003cp\u003eThe bolt flange around the top lid measures an additional 25.4 mm (1.00\") per side; add this to the indicated measurements. The custom \"shoebox\" design is optional; contact us for custom orders.\u003cbr\u003e\n8 gallon (30.28 liter) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 527 mm \/ Height: 219 mm \/ Width: 308 mm\u003c\/p\u003e\n\n\u003cp\u003e10 gallon (37.85 liter) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 620 mm \/ Height: 257 mm \/ Width: 257 mm\u003c\/p\u003e\n\n\u003cp\u003e12 gallon (45.42 liter) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 527 mm \/ Height: 241 mm \/ Width: 454 mm\u003c\/p\u003e\n\n\u003cp\u003e15 gallon (56.78 liter) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 622 mm \/ Height: 241 mm \/ Width: 450 mm\u003c\/p\u003e\n\n\u003cp\u003e64.35 liter fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 511 mm \/ Height: 324 mm \/ Width: 435 mm\u003c\/p\u003e\n\n\u003cp\u003eLength: 511 mm \/ Height: 324 mm \/ Width: 435 mm\u003c\/p\u003e\n\n\u003cp\u003e68.13 liter fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 711 mm \/ Height: 251 mm \/ Width: 435 mm\u003c\/p\u003e\n\n\u003cp\u003e83.27 liter fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 22 gallons (83.27 liters):\u003c\/p\u003e\n\n\u003cp\u003eLength: 864 mm \/ Height: 241 mm \/ Width: 445 mm\u003c\/p\u003e\n\n\u003cp\u003e90 liter (24 gallon) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 635 mm \/ Height: 346 mm \/ Width: 426 mm\u003c\/p\u003e\n\n\u003cp\u003eLength: 25 inches \/ Height: 13.62 inches \/ Width: 16.75 inches\u003c\/p\u003e\n\n\u003cp\u003e98 liter (26 gallon) fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eLength: 641 mm \/ Height: 438 mm \/ Width: 428 mm\u003cbr\u003e\nLength: 25.25 inches \/ Height: 17.25 inches \/ Width: 16.85 inches\u003c\/p\u003e","brand":"ATL","offers":[{"title":"Default Title","offer_id":56688014885204,"sku":"NP-150-06-15","price":3161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/pyrotect-elite-15-gallons-56-78-liter-with-the-nuke-performance-cfc-unit.jpg?v=1788963848"},{"product_id":"deposito-de-compensacion-de-pila-de-combustible-deatschwerks-de-20-l","title":"DeatschWerks 2.0L Fuel Cell Surge Tank","description":"\u003cp\u003e2.0L staged fuel surge tank, universal. Compatible with up to 4 DW200, DW300, or DW400 fuel pumps.\u003c\/p\u003e","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":56688016097620,"sku":"USA-DW-6-000-20FST","price":890.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/6-000-20FST.jpg?v=1788963821"},{"product_id":"sensor-de-nivel-de-combustible-0-90-ohm-117-pulgadas-con-cubierta-protectora-radium-engineering","title":"0-90 ohm Fuel Level Sensor, 11.7 inches, with Protective Cover, Radium Engineering","description":"\u003cp\u003eATTENTION:\u003c\/p\u003e\n\n\u003cp\u003e1. The Radium 20-0847-XXX fuel level float cover is only compatible with the new Radium FCST (20-099X-XX).\u003c\/p\u003e\n\n\u003cp\u003e2. For older Radium FCST versions 20-049X-XX and 20-069X-XX, the Radium 20-0747-XXX without cover must be used.\u003c\/p\u003e\n\n\u003cp\u003e3. Radium level sensors 20-0747-203 and 20-0747-297 without cover are compatible with all Radium FCST part numbers.\u003c\/p\u003e\n\n\u003cp\u003eThis fuel level sensor uses the standard SAE 5-bolt mounting pattern, widely used with the Radium Fuel Surge Tank.\u003c\/p\u003e\n\n\u003cp\u003eFully sealed stainless steel construction with magnetic float.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for gasoline, diesel, water, and all alcohol-based fuels, including methanol, ethanol, E85, etc.\u003c\/p\u003e\n\n\u003cp\u003eNOTES:\u003c\/p\u003e\n\n\u003cp\u003e-All level sensors have a resistance of 0 Ohms (empty fuel) to 90 Ohms (full fuel) (common on many aftermarket gauges).\u003c\/p\u003e\n\n\u003cp\u003e-Radium does not sell fuel level gauges, but a popular option is this Autometer fuel level gauge.\u003c\/p\u003e\n\n\u003cp\u003e-To test the sensor, measure the resistance between the two wires while tilting it so the float moves.\u003c\/p\u003e\n\n\u003cp\u003e-If purchased with a Radium Fuel Surge Tank (FCST), the sensor will come pre-installed.\u003c\/p\u003e\n\n\u003cp\u003e-If the output of this sensor is not compatible with your original fuel gauge, consider a resistance signal converter, which can be found here.\u003cbr\u003e\n(Radium Engineering has no experience with this product; for more information, contact Classic Instruments).\u003c\/p\u003e\n\n\u003cp\u003eSPECIFICATIONS:\u003c\/p\u003e\n\n\u003cp\u003ePROBE MATERIAL: 304 Stainless Steel\u003cbr\u003e\nFLOAT MATERIAL: Buna-N Plastic\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING FLANGE: SAE 5-Bolt\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING GASKET: FKM\u003c\/p\u003e\n\n\u003cp\u003eRESISTANCE: 0 (Empty) - 90 (Full) Ohms\u003cbr\u003e\nPVC WIRES: 460 mm (18\") with PA sleeve\u003c\/p\u003e\n\n\u003cp\u003eCONNECTORS: Deutsch DT, 2P\u003cbr\u003e\nOPERATING TEMPERATURE: -40 °F to +185 °F\u003cbr\u003e\nINCLUDES:\u003c\/p\u003e\n\n\u003cp\u003e-Level Sensing Probe\u003cbr\u003e\n-SAE 5-Bolt GASKET\u003cbr\u003e\n-Stainless Steel 10-32 Screws (x5)\u003c\/p\u003e\n\n\u003cp\u003eDeutsch DT 2P Connector\u003cbr\u003e\n-Deutsch DT Connectors (x2)\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688016425300,"sku":"USA-RAD-20-0847-297","price":113.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/fuel-level-sender-0-90-ohm-11-7in-shrouded-radium-engineering_4.jpg?v=1788963910"},{"product_id":"kit-de-pernos-para-mamparo-electrico-paquete-de-6-unidades-radium-engineering","title":"Radium Engineering Electrical Bulkhead Fitting Kit, 6-Pack","description":"\u003cp\u003eThese hermetically sealed bulkhead studs are ideal for high current pass-through a wall or panel. Only one drilled hole is required. See required dimensions below.\u003c\/p\u003e\n\n\u003cp\u003eThis kit includes 6 studs. Each electrical conductive stud is custom CNC machined out of 304 stainless steel. It includes a special insulating sleeve that prevents conduction at the panel and galvanic corrosion. Each ring terminal supports 10-12 AWG wire. The anodized aluminum nut and heat shrink tubing insulate the exposed areas from accidental shorts. Each stud includes 2 top lock nuts for secure connection. The kit is compatible with all fuel types including gasoline, diesel, ethanol, methanol, E85, etc. Studs, special nuts, ring terminals, nylon acorn nuts, washers, and heat shrink tubing are all included. The following dimensions are mandatory for proper use:\u003c\/p\u003e\n\n\u003cp\u003eHole Diameter: 0.220\"-0.234\" (15\/64\" drill bit)\u003c\/p\u003e\n\n\u003cp\u003eMaterial Thickness: 0.262\"-0.322\"\u003c\/p\u003e\n\n\u003cp\u003eNotes:\u003c\/p\u003e\n\n\u003cp\u003e-Successfully tested up to 30A.\u003c\/p\u003e\n\n\u003cp\u003e-This kit includes 6 stud sets.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688017801556,"sku":"USA-RAD-17-0048","price":67.88,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/electrical-bulkhead-stud-kit-6-pack-radium-engineering.jpg?v=1788963987"},{"product_id":"kit-completo-de-repostaje-fcst-x-con-montaje-remoto-y-conexion-en-seco-de-15-pulgadas-radium-engineering","title":"FCST-X complete refueling kit with remote mount and 1.5-inch dry break, Radium Engineering","description":"\u003cp\u003e20-0841-03 FCST-X COMPLETE REFUELING KIT, REMOTE MOUNT, 1.5-INCH DRY BREAK This option works for vehicles requiring a remotely mounted fast-fill dry break connection from the fuel cell. The supplied dump can features a leak-free dry break probe for rapid fuel filling. The included flanged, vented dry break receiver is typically mounted to a body panel. A 1.5\" fuel filler hose connects to the supplied Radium FCST-X mounted fill neck elbow. Unlike pressurized systems, this unique dry break setup is allowed by most sanctioning bodies. A proper vent kit attaches directly to the supplied 12AN fast-fill dry break valve.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688018391380,"sku":"USA-RAD-20-0841-03","price":1161.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0841-03.jpg?v=1788963833"},{"product_id":"sensor-de-nivel-de-combustible-fmic-eu-0-190-ohmios-350-mm","title":"FMIC.EU Fuel Level Sensor 0–190 Ohm 350 mm","description":"\u003cp\u003eFMIC.EU 0–190 Ohm 350mm Fuel Level Sensor\u003c\/p\u003e\n\n\u003cp\u003eThis universal fuel and fluid level sensor (fuel\/water tank level sensor) is designed for use in fuel and water tanks. Thanks to its wide compatibility with most gauges and measuring instruments with matching resistance (ohm) ranges, it can be used in a wide variety of automotive and industrial applications.\u003c\/p\u003e\n\n\u003cp\u003eStable operation and high durability: This sensor provides a stable output signal and is designed for a long service life. Its vibration-resistant and explosion-proof construction ensures reliable operation even under demanding working conditions.\u003c\/p\u003e\n\n\u003cp\u003eRobust and simple design: The sensor features a compact and durable structure, resistant to mechanical damage and corrosion. Its simplicity and solid construction make it ideal for environments exposed to vibrations, humidity and temperature changes, maintaining its full functionality over time.\u003c\/p\u003e\n\n\u003cp\u003eFeatures: - Made of SS304 stainless steel - Measurement range (travel): 350 mm - Linear resistance values: 0–190 Ohm - Mounting diameter: 32 mm - Includes gasket and mounting screws\u003c\/p\u003e\n\n\u003cp\u003eEasy installation: No complex wiring or adjustments required; quick and error-free installation process.\u003c\/p\u003e","brand":"FMIC EU","offers":[{"title":"Default Title","offer_id":56688022880596,"sku":"FUEL-SENSOR-350","price":43.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/FUEL-SENSOR-350_DSC_7381.jpg?v=1788963822"},{"product_id":"tapon-del-cuello-de-llenado-solamente-radium-engineering","title":"Radium Engineering filler neck cap only","description":"\u003cp\u003eThis is a replacement cap for the filler neck. Compatible with Radium Engineering 20-0197-V.\u003c\/p\u003e\n\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\n\u003cp\u003e- Vented Fuel Filler Cap\u003c\/p\u003e\n\n\u003cp\u003e- Rollover Protection\u003c\/p\u003e\n\n\u003cp\u003e- FKM O-ring\u003c\/p\u003e\n\n\u003cp\u003e- Mounting Hardware\u003c\/p\u003e\n\n\u003cp\u003eInstructions PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688025272660,"sku":"USA-RAD-20-0148-V","price":32.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/fill-neck-cap-only-radium-engineering.jpg?v=1788963950"},{"product_id":"sensor-de-nivel-de-combustible-nuke-performance-240-33-ohmios-9-228-mm","title":"Nuke Performance 240-33 Ohm Fuel Level Sensor - 9\" \/ 228 mm","description":"\u003cp\u003eThe ISSPRO fuel level sensor is compatible with the Nuke Performance CFC Unit. 240-33 Ohm fuel level sensor available with or without a fuel gauge, compatible with the standard SAE 5-bolt mounting pattern. Compatible with Nuke Performance Fuel Cells:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08-240: 203 mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 6.25 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 8 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 30 Liters\u003cbr\u003e\nATL Saver Cell 45 Liters\u003cbr\u003e\nWell Cell Saver Cell 45 Liters\u003cbr\u003e\nATL Saver Cell 60 Liters\u003cbr\u003e\nATL Saver Cell 80 Liters\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09-240: 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 10 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 12 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 15 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 18 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 22 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 40 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 20 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 40 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 60 Liters\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-10-240: 254 mm \/ 10\"\u003c\/p\u003e\n\n\u003cp\u003eNot available\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12-240: 305 mm \/ 12\"\u003cbr\u003e\nPyrotect 17 Gallon Fuel Cell. AluCell Aluminum Fuel Cell 80 Liters.\u003c\/p\u003e\n\n\u003cp\u003eResistance: 240 Ohm (empty), 33 Ohm (full).\u003c\/p\u003e\n\n\u003cp\u003eOptional Specifications: Also available in 0-90 Ohms.\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensors for motorsports and aftermarket fuel cells. Compatible with most common fuel cells including Pyrotect, ATL, Fuel Safe, Harmon, Premiere, Jaz, and more. It is the perfect match for the Nuke Performance Competition Fuel Cell Unit.\u003c\/p\u003e\n\n\u003cp\u003eI have lost the adapter plate\/spacer for my fuel level sensor. Can I order a new one? My fuel level sensor does not fit the mounting point of the CFC unit. What should I do? An adapter plate\/spacer is needed to mount a fuel level sensor with a larger diameter than the CFC unit's bore or which uses the common asymmetric 5-bolt pattern on aftermarket fuel level sensors. The adapter plate\/spacer is included with all Nuke Performance CFC Units when purchased. If you lose it, a replacement plate can be ordered. A detailed mounting description can be found in the CFC unit product manual here. Asymmetric 5-bolt adapter plate. Part Number: 150-10-117\u003c\/p\u003e\n\n\u003cp\u003eApproved for all types of fuels and for all types of motorsports. Approved for gasoline, methanol, and ethanol. Available in various lengths; choose the size when placing your order. If ordered together with a fuel cell, we will ensure you receive the correct one with your order.\u003cbr\u003e\nOrder fuel level gauge without fuel level sending unit. If you need a fuel level gauge and have already purchased the sending unit, you can purchase the gauge as an accessory if needed. Fuel Gauge. Resistance (OHM): 240-33 Ohm. Part Number: 150-FLG-01-240\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688030056788,"sku":"NP-150-FLS-09-240","price":244.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NukePerformanceFLS-240-33_175cdd17-7947-4c04-87d8-e481882122f3.jpg?v=1788963806"},{"product_id":"modulo-de-extension-deatschwerks-2-0fst-para-tanque-de-compensacion-de-pila-de-combustible","title":"DeatschWerks 2.0FST Fuel Cell Surge Tank Extension Module","description":"\u003cp\u003e255mm module extensions for 2.0L Fuel Cell Surge Tank - Orange\u003c\/p\u003e","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":56688031301972,"sku":"USA-DW-6-03-FST-EXT2","price":56.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/6-03-FST-EXT2.jpg?v=1788963976"},{"product_id":"kit-de-pestanas-de-montaje-para-celdas-de-combustible-de-radium-engineering","title":"Radium Engineering Fuel Cell Mounting Tab Kit","description":"\u003cp\u003eOVERVIEW Depending on the amount of fill plate accessories, the original mounting tabs may not be sufficient. Fortunately, this design uses 12 fill plate bolts (instead of 4 or 6) to evenly distribute the load across the fuel cell.\u003c\/p\u003e\n\n\u003cp\u003eThe 2-piece mounting tabs are laser cut from lightweight 5052 aluminum, deburred, and black anodized. 36 black sealing washers are also included (fill plate = 24, mounting tabs = 12).\u003c\/p\u003e\n\n\u003cp\u003eCOMPATIBILITY 1. Can be used for old fuel cells that utilize a 24-bolt (6x10) fill plate including FuelSafe, ATL, Jaz, Harmon, Pyrotect, etc. 2. Only compatible with Radium Engineering older FCSTs (20-014X-XX \u0026amp; 20-049X-XX). 3. Newer FCSTs and the FCST-X have machined provisions that eliminate the need for this mounting tab kit. 4. This mounting tab kit is NOT needed for any brand fill plate that utilizes a Radium Engineering RA-series fuel cell.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688032743764,"sku":"USA-RAD-20-0155","price":34.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/Fuel_Cell_Mounting_Tab_Kit_f662cbff-755a-45bd-9356-86a39d875394.jpg?v=1788482042"},{"product_id":"deposito-de-compensacion-de-pila-de-combustible-deatschwerks-de-20-l-con-4-bombas-de-combustible-dw400","title":"DeatschWerks 2.0L Fuel Cell Surge Tank with 4 DW400 Fuel Pumps","description":"\u003cp\u003e2.0L stepped fuel cell surge tank with 4 DW400 fuel pumps, universal\u003c\/p\u003e","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":56688034677076,"sku":"USA-DW-6-401-20FST","price":1833.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/6-401-20FST.jpg?v=1788963954"},{"product_id":"deposito-de-combustible-de-40-l-fmic-eu","title":"FMIC.EU 40L fuel tank","description":"\u003cp\u003eFMIC.EU 40L fuel cell\u003c\/p\u003e\n\n\u003cp\u003eThe 40-liter FMIC.EU fuel cell is a lightweight, durable, high-quality construction designed for motorsport, track use, and vehicle builds. Made entirely of aluminum, it weighs only 5.5 kg. Its body is designed for competition, featuring full TIG welding that ensures excellent tightness, durability, and resistance to vibration and pressure.\u003c\/p\u003e\n\n\u003cp\u003eThe tank is equipped with four AN10 ports, allowing for flexible fuel system configuration, pump installation, return lines, and ventilation. A high-quality aluminum filler cap ensures precise, leak-free sealing, even under intensive use.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its low weight and solid construction, the tank is highly recommended for drifting, autoslalom, quarter-mile racing, as well as high-performance and street vehicles. For track use with high lateral G-forces, it is recommended to use the tank in conjunction with a surge tank to ensure constant fuel supply.\u003cbr\u003e\n- Lightweight construction: only 5.5 kg - Fully TIG-welded aluminum body - Four AN10 ports - Aluminum filler cap: durable and precise - High resistance to heat, pressure, and racing conditions - Ideal for drifting, autoslalom, drag racing, and street cars - Compatible with surge tanks\u003c\/p\u003e\n\n\u003cp\u003eTechnical specifications:\u003c\/p\u003e\n\n\u003cp\u003e- Dimensions: 42 x 42 x 23 cm - Capacity: 40 liters - Material: aluminum - Weight: 5.5 kg - Number of ports: 4 - Port thread: AN10 - Aluminum filler cap - Precision TIG welds - Competition-ready construction\u003c\/p\u003e","brand":"FMIC EU","offers":[{"title":"Default Title","offer_id":56688035070292,"sku":"TNKFMIC-TAS-40N","price":211.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/tank-_-tnkfmic-tas-20n_5.jpg?v=1788963937"},{"product_id":"contenedores-atl-para-pilas-de-combustible-saver-cell-de-106-galones-40-litros","title":"ATL Fuel Cell Saver Cell 10.6 Gallon (40 Liter) Containers","description":"\u003cp\u003eATL Saver Cell aluminum containers. To conform to FIA regulations, Saver Cells must be installed within an aluminum container. When checking for chassis fitment, please bear in mind the dimensions of the container, not the Saver Cell.\u003c\/p\u003e\n\n\u003cp\u003eRedesigned aluminum container for ATL Saver and Super Cells, featuring a sleek, upright edge design (maximum clearance for tight installations), mounting strap supports, and a removable window that allows for easy fuel cell expiration date checks without removing it from the container. Includes button head screws, washers, and nuts.\u003c\/p\u003e\n\n\u003cp\u003eCustomers are not recommended to manufacture their own aluminum containers without consulting ATL, as any sizing issues could invalidate the warranty. ATL Saver Cell Fuel Cell Container Specifications:\u003c\/p\u003e\n\n\u003cp\u003e30-liter container, compatible with 150-08-304\u003c\/p\u003e\n\n\u003cp\u003ePart no: 150-CN-AA-041\u003c\/p\u003e\n\n\u003cp\u003eInternal dimensions: 315 x 523 x 234 mm (12.4 x 20.6 x 9.2\")\u003c\/p\u003e\n\n\u003cp\u003eExternal dimensions: 321\/368 x 526 x 237\/262 mm (12.6\/14.5 x 20.7 x 9.3\/10.3\")\u003c\/p\u003e\n\n\u003cp\u003eReplaces old part no: 150-SA-AA-041\u003c\/p\u003e\n\n\u003cp\u003eWeight: 3.28 kg (7.24 lb)\u003c\/p\u003e\n\n\u003cp\u003e40-liter container, compatible with 150-08-404\u003c\/p\u003e\n\n\u003cp\u003ePart no: 150-CN-AA-051\u003c\/p\u003e\n\n\u003cp\u003eInternal dimensions: 326 x 630 x 262 mm (12.8 x 24.8 x 10.3\")\u003c\/p\u003e\n\n\u003cp\u003eExternal dimensions: 332\/379 x 633 x 265\/290 mm (13.1\/14.9 x 24.9 x 10.4\/11.4\")\u003c\/p\u003e\n\n\u003cp\u003eReplaces old part no: 150-SA-AA-051\u003c\/p\u003e\n\n\u003cp\u003eWeight: 4.12 kg (9.08 lb)\u003c\/p\u003e\n\n\u003cp\u003e45-liter container, compatible with 150-08-454\u003c\/p\u003e\n\n\u003cp\u003ePart no: 150-CN-AA-061\u003c\/p\u003e\n\n\u003cp\u003eInternal dimensions: 453 x 520 x 243 mm (17.8 x 20.4 x 9.5\")\u003c\/p\u003e\n\n\u003cp\u003eExternal dimensions: 459\/506 x 523 x 246\/271 mm (18.1\/19.9 x 20.6 x 9.7\/10.7\")\u003c\/p\u003e\n\n\u003cp\u003eReplaces old part no: 150-SA-AA-061\u003cbr\u003e\nWeight: 4.33 kg (9.56 lb)\u003c\/p\u003e\n\n\u003cp\u003e60-liter container, compatible with 150-08-604\u003c\/p\u003e\n\n\u003cp\u003ePart no: 150-CN-AA-071\u003c\/p\u003e\n\n\u003cp\u003eInternal dimensions: 453 x 520 x 243 mm (17.8 x 20.4 x 9.5\")\u003c\/p\u003e\n\n\u003cp\u003eExternal dimensions: 456\/503 x 523 x 246\/271 mm (18.0\/19.8 x 20.6 x 9.7\/10.7\")\u003c\/p\u003e\n\n\u003cp\u003eReplaces old part no: 150-SA-AA-071\u003c\/p\u003e\n\n\u003cp\u003eWeight: 4.33 kg (9.56 lb)\u003c\/p\u003e\n\n\u003cp\u003e80-liter container, compatible with 150-08-804\u003c\/p\u003e\n\n\u003cp\u003ePart no: 150-CN-AA-101\u003c\/p\u003e\n\n\u003cp\u003eInternal dimensions: 448 x 870 x 246 mm (17.6 x 34.2 x 9.7\")\u003c\/p\u003e\n\n\u003cp\u003eExternal dimensions: 454\/501 x 873 x 249\/274 mm (17.9\/19.7 x 34.4 x 9.8\/10.8\")\u003c\/p\u003e\n\n\u003cp\u003eReplaces old part no: 150-SA-AA-101\u003c\/p\u003e\n\n\u003cp\u003eWeight: 6.45 kg (14.23 lb)\u003c\/p\u003e","brand":"ATL","offers":[{"title":"Default Title","offer_id":56688037232980,"sku":"ATL-150-CN-AA-051","price":362.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/ATL-150-CN-AA-XXX_1_a38e25a5-d44c-4018-8fcd-475301f9cb00.jpg?v=1788963937"},{"product_id":"pila-de-combustible-nuke-performance-alucell-con-unidad-cfc-nuke-performance-perfil-bajo-2113-galones-80-litros","title":"Nuke Performance AluCell Fuel Cell with Nuke Performance CFC Unit, Low Profile, 21.13 Gallons (80 Liters).","description":"\u003cp\u003eThe lightweight and affordable Nuke Performance AluCell aluminum fuel cells are combined with the Nuke Performance CFC unit (surge tank unit). This product offers an affordable solution for those who do not require FIA homologation for professional racing but want to enjoy all the advantages of the Nuke Performance CFC unit. The fuel pump hanger with integrated surge tank provides this functionality, which includes:\u003c\/p\u003e\n\n\u003cp\u003e20 \/ 40 \/ 45WC \/ 60 \/ 80-liter aluminum fuel cell\u003cbr\u003e\nIntegrated 2-liter surge tank\u003cbr\u003e\nSuitable for all types of fuel, including E85\u003c\/p\u003e\n\n\u003cp\u003eIntegrated brackets for easy and secure mounting\u003c\/p\u003e\n\n\u003cp\u003eCompatible with single or dual high-pressure fuel pumps\u003cbr\u003e\nOversized AN-10 ORB output for maximum flow\u003c\/p\u003e\n\n\u003cp\u003eNEW: Available in a new 45-liter version\u003cbr\u003e\nLow-profile fuel filler cap with integrated roll-over valve\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance AluCell fuel cells are compatible with carburetor fuel systems and with the integrated Nuke Performance CFC unit. They eliminate the need for an external surge tank, which is essential for fuel cell operation, making them a perfect alternative for fuel injection systems. AluCell cells are made from the highest quality aluminum for use with all types of fuel and are approved for gasoline, methanol, and ethanol. AluCell Specifications\u003c\/p\u003e\n\n\u003cp\u003eAluCell 80-liter Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-07-081\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e577 mm (22.71”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003e555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e320 mm (12.59”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003e13520 g (29.80 lb), incl. CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e80 liters (21.13 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209505498\u003c\/p\u003e\n\n\u003cp\u003eThe AluCell Fuel Tank Kit includes:\u003c\/p\u003e\n\n\u003cp\u003e1 x AluCell 20 liter \/ 40 liter \/ 60 liter \/ 80 liter Aluminum Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance CFC Unit - Low Profile Version\u003c\/p\u003e\n\n\u003cp\u003e2 x 8mm hose barb fittings with 1\/4\" BSPP to male thread\u003cbr\u003e\n1 x 1\/4\" x 1\/4\" BSPP Plug, for use with a single high-pressure fuel pump\u003c\/p\u003e\n\n\u003cp\u003e2 x 39mm inserts for high-pressure fuel pump hanger\u003c\/p\u003e\n\n\u003cp\u003e1 x Viton gasket for fuel tanks with 24-bolt pattern (suitable for alcoholic fuels)\u003c\/p\u003e\n\n\u003cp\u003e1 x Low Profile Filler Cap (remote filler neck available as an accessory)\u003c\/p\u003e\n\n\u003cp\u003e1 x Machined aluminum dual fuel pump bracket and adjustable pickup pump bracket\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) male to AN-6 vent safety valve\u003c\/p\u003e\n\n\u003cp\u003e1 x FLS spacer, for fuel level sensors with asymmetrical bolt pattern\u003c\/p\u003e\n\n\u003cp\u003e24 x 1\/4-28 UNF x 1 bolts with nylon washers\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance CFC Unit Specifications\u003c\/p\u003e\n\n\u003cp\u003eCFC Unit Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-05-201\u003c\/p\u003e\n\n\u003cp\u003eMinimum Mounting Depth\u003c\/p\u003e\n\n\u003cp\u003e219 mm (8.62\")\u003c\/p\u003e\n\n\u003cp\u003eMounting Bolt Pattern\u003cbr\u003e\n6x10\" Bolt Pattern (24 bolts)\u003c\/p\u003e\n\n\u003cp\u003eHigh-Pressure Fuel Pump Connector\u003c\/p\u003e\n\n\u003cp\u003e3 units (max. 125) amps \/ each *)\u003c\/p\u003e\n\n\u003cp\u003e- Connection Points\u003cbr\u003e\n6mm Bolt Connectors\u003c\/p\u003e\n\n\u003cp\u003eFuel Pump Connector\u003cbr\u003e\nx 2 (max. 125 amps \/ each *)\u003c\/p\u003e\n\n\u003cp\u003e- Connection Points\u003cbr\u003e\n6mm Bolt Connectors\u003c\/p\u003e\n\n\u003cp\u003eLength\u003cbr\u003e\n295 mm (13.74\")\u003c\/p\u003e\n\n\u003cp\u003eWidth\u003cbr\u003e\n194 mm (9.88\")\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003cbr\u003e\n1934 g (68.21 oz)\u003c\/p\u003e\n\n\u003cp\u003eMaximum Suction Tube Length\u003cbr\u003e\n90 mm (3.54\") \/ 95 mm (3.74\")\u003c\/p\u003e\n\n\u003cp\u003eCompatible with Lift Fuel Pumps\u003cbr\u003e\n1 x brushed fuel pump\u003c\/p\u003e\n\n\u003cp\u003eCompatible with High-Pressure Pumps\u003cbr\u003e\n1-2 x brushed fuel pump\u003c\/p\u003e\n\n\u003cp\u003eFuel Compatibility\u003cbr\u003eGasoline, Methanol, Ethanol, E85\u003c\/p\u003e\n\n\u003cp\u003eCompatible with additional Venturi Lift Kit\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eInternal Surge Tank Volume\u003cbr\u003e\nApproximately 2.0 liters (0.53 gallons)\u003c\/p\u003e\n\n\u003cp\u003eOutput Port, Thread\u003cbr\u003e\nAN-10 ORB **\u003c\/p\u003e\n\n\u003cp\u003eReturn Port Thread\u003c\/p\u003e\n\n\u003cp\u003eAN-8 ORB **\u003c\/p\u003e\n\n\u003cp\u003eVent Valve Thread\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003c\/p\u003e\n\n\u003cp\u003eYES\u003c\/p\u003e\n\n\u003cp\u003eCFC units do not include fuel pumps\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688039395668,"sku":"NP-150-07-081","price":1453.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NP-150-07-081_5e3558de-4301-45cf-949c-d4b32d027b9b.jpg?v=1788963953"},{"product_id":"contenedor-nuke-performance-atl-para-pilas-de-ahorro-de-30-litros","title":"Nuke Performance ATL 30L Fuel Cell Container","description":"\u003cp\u003eATL Saver Cell aluminum containers. To comply with FIA regulations, Saver Cells must be installed within an aluminum container. When checking for chassis compatibility, please consider the container dimensions, not the Saver Cell dimensions.\u003c\/p\u003e\n\n\u003cp\u003eCustomers are not advised to fabricate their own aluminum containers without consulting ATL, as any sizing issues could invalidate the warranty. These containers can only be ordered in conjunction with the fuel tank. If you require them after delivery, you must contact us before ordering to inquire about lead times.\u003c\/p\u003e\n\n\u003cp\u003eMeasurements: ATL Saver Cell 150-08-304 30-liter (7.92-gallon) container: Length: 534 mm \/ Width: 326 mm \/ Height: 240 mm\u003c\/p\u003e","brand":"ATL","offers":[{"title":"Default Title","offer_id":56688039887188,"sku":"NP-150-SA-AA-041","price":434.51,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/1658-82-150-sa-aa-041_01.jpg?v=1788963899"},{"product_id":"interruptor-de-nivel-de-combustible-1-8-npt-radium-endingeering","title":"Radium Engineering 1\/8 NPT Fuel Level Switch","description":"\u003cp\u003e20-0461 Fuel Level Switch, 1\/8 NPT\u003c\/p\u003e\n\n\u003cp\u003eThis 1\/8\" NPT fuel level switch is designed to be installed inside the container, as depicted below.\u003cbr\u003e\nWhen the fuel level drops, a signal can be sent to a unit, such as a dash indicator or a programmable ECU input, for safety purposes. The switch is constructed from corrosion-resistant stainless steel and is compatible with all fuel types. It includes 24\" (61 cm) long, 20 AWG wires.\u003c\/p\u003e\n\n\u003cp\u003eNOTES: 1. Before installation, verify the signal direction on a test bench. 2. The switch's polarity can be easily reversed by removing the retaining clip and flipping the float. 3. A 1\/8\" NPT threaded port is required for installation. 4. Always apply PTFE pipe thread sealant to the tapered pipe threads.\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688039952724,"sku":"USA-RAD-20-0461","price":102.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0461.jpg?v=1788963912"},{"product_id":"pila-de-combustible-nuke-performance-alucell-de-40-l-con-unidad-cfc-nuke-performance","title":"Nuke Performance 40L AluCell Fuel Cell with Nuke Performance CFC Unit","description":"\u003cp\u003eThe lightweight and economical AluCell aluminum fuel cells are combined with the Nuke Performance surge tank (CFC unit).\u003c\/p\u003e\n\n\u003cp\u003eThis product offers an affordable solution for those who do not require FIA homologation for professional racing, but want to enjoy all the advantages of the Nuke Performance CFC unit. The fuel pump bracket with integrated surge tank provides this functionality, including:\u003c\/p\u003e\n\n\u003cp\u003e40\/60 liter aluminum fuel cell\u003cbr\u003e\nIntegrated 2-liter surge tank\u003cbr\u003e\nCompatible with gasoline, methanol, and E85\u003cbr\u003e\nIntegrated brackets for easy and secure mounting\u003cbr\u003e\nCompatible with single or dual high-pressure fuel pumps\u003cbr\u003e\nAN-10 outlet and AN-6 vent safety valve\u003cbr\u003e\nLow-profile fuel filler cap with integrated roll-over valve\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance AluCell fuel cells are suitable for use with carburetor-based fuel systems and with the integrated Nuke Performance CFC unit. They eliminate the need for an external surge tank, which is indispensable for the operation of a fuel cell, making them a perfect alternative for fuel injection systems. AluCell cells are made from the highest quality aluminum, suitable for all types of fuel and 100% compatible with gasoline, methanol, and ethanol.\u003c\/p\u003e\n\n\u003cp\u003eTechnical information:\u003c\/p\u003e\n\n\u003cp\u003eCompetition Fuel Cell Unit:\u003c\/p\u003e\n\n\u003cp\u003e• CNC machined from 6063 aluminum alloy.\u003c\/p\u003e\n\n\u003cp\u003e• Stainless steel bolts for increased durability and a flawless look.\u003c\/p\u003e\n\n\u003cp\u003e• The surge tank has an approximate capacity of 2 liters.\u003cbr\u003e\n• 6x10” machined aluminum plate with standard 24-bolt pattern.\u003c\/p\u003e\n\n\u003cp\u003e• Minimum mounting depth: 219 mm.\u003c\/p\u003e\n\n\u003cp\u003e• Viton O-rings and ethanol-resistant seals.\u003c\/p\u003e\n\n\u003cp\u003e• Outlet port: AN-10 (7\/8 UNF), available in AN-8, AN-10, and AN-12.\u003c\/p\u003e\n\n\u003cp\u003e• Return port: AN-8 (3\/4 UNF), available in AN-6, AN-8, and AN-10.\u003c\/p\u003e\n\n\u003cp\u003e• Vent port: AN-8 (3\/4 UNF), available in AN-6, AN-8, and AN-10.\u003c\/p\u003e\n\n\u003cp\u003e• Delivered with 1x AN-8 (3\/4 UNF) to AN-6 male adapter for ventilation, 1x AN-8 (3\/4 UNF) to AN-8 male adapter, 1x AN-10 (7\/8 UNF) to AN-8 male adapter, and 1x AN-10 (7\/8 UNF) to AN-10 male adapter.\u003c\/p\u003e\n\n\u003cp\u003eCompetition Fuel Cell Unit:\u003c\/p\u003e\n\n\u003cp\u003e• Corrosion resistant 5083 H111 heavy-duty aluminum.\u003c\/p\u003e\n\n\u003cp\u003e• 5-axis robot welded from two aluminum sheets.\u003c\/p\u003e\n\n\u003cp\u003e• Integrated brackets 4 x 8.5 x 23.5 mm (0.33 x 0.92”).\u003cbr\u003e\n• 6x10” stainless steel flange with 24-bolt pattern.\u003c\/p\u003e\n\n\u003cp\u003e• Powder coated exterior finish.\u003c\/p\u003e\n\n\u003cp\u003e• Suitable for all fuel types, including alcohol-based fuels.\u003c\/p\u003e\n\n\u003cp\u003eMeasurements:\u003c\/p\u003e\n\n\u003cp\u003eAluCell 40 liter tank. Part number: 150-07-041\u003c\/p\u003e\n\n\u003cp\u003eLength: 555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 377 mm (14.84”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 251 mm (9.88”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available (including CFC unit)\u003c\/p\u003e\n\n\u003cp\u003eMounting holes: 8.5 x 23.5 mm (0.33 x 0.92”)\u003c\/p\u003e\n\n\u003cp\u003eCompatible with fuel level sensor: 150-FLS-09-02 (9” \/ 228 mm)\u003c\/p\u003e\n\n\u003cp\u003eAluCell 60 liter tank. Part number: 150-07-061\u003c\/p\u003e\n\n\u003cp\u003eLength: 577 mm (22.71”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 250 mm (9.84”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: N\/A, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eMounting holes: 8.5 x 23.5 mm (0.33 x 0.92”)\u003c\/p\u003e\n\n\u003cp\u003eCompatible with fuel level sensor: 150-FLS-09-02 (9\" \/ 228 mm)\u003c\/p\u003e\n\n\u003cp\u003eIncluded in the package:\u003c\/p\u003e\n\n\u003cp\u003e1 x AluCell 40 liter (10.55 gallon) \/ 60 liter (15.85 gallon) aluminum fuel tank\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance Competition fuel tank unit\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-10 (7\/8 UNF) to AN-8 male outlet connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-10 (7\/8 UNF) to AN-10 male outlet connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-8 male return connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-6 male vent safety valve\u003c\/p\u003e\n\n\u003cp\u003e* Fuel pump not included\u003c\/p\u003e\n\n\u003cp\u003eIntegrated 2-liter surge tank, machined aluminum bracket for 1 or 2 fuel pumps\u003c\/p\u003e\n\n\u003cp\u003eAluCell aluminum fuel tanks include the Nuke Performance CFC unit as a replacement for the fill plate. The unique Nuke Performance CFC unit is the perfect solution for a simplified high-performance fuel system, where simplicity and durability are paramount. This setup eliminates the need for a space-consuming external surge tank. With all necessary fuel pumps integrated into the tank itself, this is the only component needed. This frees up space and weight, and increases safety, as fewer fuel line connections are required and no external fuel pumps are used.\u003c\/p\u003e\n\n\u003cp\u003eInternal high-pressure fuel pumps, for any need between 200 and 2000 HP\u003c\/p\u003e\n\n\u003cp\u003eAluCell tanks include the unique Nuke Performance CFC unit with integrated surge tank function and are compatible with single or dual high-pressure fuel pumps from Deatschwerks, AEM, Ti Automotive, Walbro, Bosch, Fuelab, Aeromotive, and many more. It is compatible with all common 39mm fuel pumps, as well as the larger Deatschwerks DW400, Walbro GST450\/GST520, Bosch BR540, and Aeromotive Stealth 450. This solution provides a constant fuel flow for power outputs between 200 and 2000 horsepower, without any fuel starvation, even under demanding driving conditions, thanks to the internal surge tank.\u003c\/p\u003e\n\n\u003cp\u003eThe CFC unit is compatible with most common fuel pumps. Together with Nuke Performance fuel pump mounting kits, setting up a high-performance fuel system has never been easier.\u003c\/p\u003e\n\n\u003cp\u003eHow are the fuel pumps mounted inside the AluCell fuel tank and surge tank?\u003c\/p\u003e\n\n\u003cp\u003eThe single tank-mounted fuel pump works as a lift pump, ensuring that the high-pressure fuel pumps within the oversized 2-liter (0.53 gallon) surge tank always have enough fuel to maximize flow and minimize the risk of fuel starvation that can severely damage the engine. For more information, download the product manual. The CFC unit is delivered with everything needed for installation. The fuel pumps of your choice, but we recommend adding one of our fuel pump mounting kits for optimal operation. All fuel pumps are securely mounted in any condition thanks to the machined brackets.\u003c\/p\u003e\n\n\u003cp\u003eFuel pump mounting kits: Learn more about fuel pump setup\u003c\/p\u003e\n\n\u003cp\u003eAdditional fuel pumps: Explore our selection of fuel pumps\u003c\/p\u003e\n\n\u003cp\u003eDelivered with all necessary fittings for quick and easy installation\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance CFC unit includes an AN-10 (7\/8 UNF) to AN-8 male fitting and an AN-10 male fitting, as well as an AN-8 (3\/4 UNF) to AN-8 male return fitting. Using the oversized high-flow AN-10 outlet combines the internal fuel pumps into a single fuel line and minimizes the need for external equipment, hoses, and fittings. The vent fittings with roll-over protection are AN-6 and can be changed to AN-6 to AN-10 when needed. Additional AN-6 to AN-12 fittings are sold separately as accessories.\u003c\/p\u003e\n\n\u003cp\u003eOutlet fittings:\u003cbr\u003e\nAN-10 (7\/8 UNF) to AN-8 male connector: Part no.: 700-01-116\u003c\/p\u003e\n\n\u003cp\u003eAN-10 (7\/8 UNF) to AN-10 male connector: Part no.: 700-01-112\u003c\/p\u003e\n\n\u003cp\u003eAN-10 (7\/8 UNF) to AN-12 male connector: Part no.: 700-01-113\u003cbr\u003e\nReturn and vent connectors:\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-6 male connector: Part no.: 700-01-101\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-8 male connector: Part no.: 700-01-102\u003c\/p\u003e\n\n\u003cp\u003eAN-8 (3\/4 UNF) to AN-10 male connector: Part no.: 700-01-103\u003c\/p\u003e\n\n\u003cp\u003eLightweight 40\/60 liter aluminum fuel tank with integrated brackets\u003c\/p\u003e\n\n\u003cp\u003eTo ensure maximum quality, AluCells are made from two automatically welded aluminum pieces by a 5-axis welding robot. Each unit undergoes individual pressure testing before surface treatment to ensure maximum functionality and compliance with CE certification specifications. Thanks to the use of highly corrosion-resistant 5083 H111 aluminum, it does not require internal anodizing or powder coating (common in cheaper fuel cells), which are affected by alcoholic fuels such as ethanol. This prevents damage to injectors and filters when the coating dissolves. Choose between 40-liter (10.56 gallons) and 60-liter (15.85 gallons) versions.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped, designed, and manufactured in Sweden\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance Competition Fuel Cell is developed, designed, and manufactured in Sweden by Nuke Performance to offer the highest quality, with the same hallmark as all other parts in our range of lightweight motorsport components. Nuke Performance quality is second to none!\u003c\/p\u003e\n\n\u003cp\u003eThe AluCell fuel cell kit includes:\u003c\/p\u003e\n\n\u003cp\u003e1 x AluCell 40 liter (10.55 gallon) \/ 60 liter (15.85 gallon) aluminum fuel cell\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance Competition fuel cell unit\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-10 (7\/8 UNF) to AN-10 male outlet connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-8 male return connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-6 male vent safety valve\u003c\/p\u003e\n\n\u003cp\u003eAluCell Specifications\u003c\/p\u003e\n\n\u003cp\u003eFor more information on specifications, please refer to the product manual.\u003c\/p\u003e\n\n\u003cp\u003eAluCell 40 liters, part no. 150-07-041\u003c\/p\u003e\n\n\u003cp\u003eLength: 555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 377 mm (14.84”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 251 mm (9.88”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available (including CFC unit)\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity: 40 liters (10.56 gallons)\u003c\/p\u003e\n\n\u003cp\u003eAluCell 60 liters, part no. 150-07-061\u003c\/p\u003e\n\n\u003cp\u003eLength: 577 mm (22.71”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 250 mm (9.84”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel tank capacity: 60 liters (15.85 gallons)\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688043852116,"sku":"NP-150-07-041","price":1343.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/nuke-performance-alucell-fuel-cell-40l-with-nuke-performance-cfc-unit_6.jpg?v=1788963891"},{"product_id":"modulo-de-bomba-de-repuesto-fcst-x-walbro-f90000267-274-285-radium-engineering","title":"Replacement Fuel Pump Module FCST-X Walbro F90000267\/274\/285 Radium Engineering","description":"\u003cp\u003eFCST-X FEATURES LEGACY FCST FEATURES The features listed below are carried over from previous Fuel Cell Surge Tanks. - Single fused 10AN ORB female threaded outlet. All pumps utilize check valves that prevent backflow. One-way fill valves (355 LPH each) allow fuel to enter but not exit, keeping the surge tank full. Multiple fuel pump options including gerotor, turbine, and brushless DC motors. High-current, hermetically sealed stainless steel electrical studs, capable of handling all pumps. Simplified maintenance eliminates sealing washers and fuel cell retaining brackets. Full CNC aluminum construction with anodized surface for superior corrosion resistance. Fuel compatibility: unleaded and leaded gasoline, methanol, ethanol, E85, etc. Optional fuel surge tank level switch and diagnostic LED safety port. Roll-over protection via vent valve.\u003c\/p\u003e\n\n\u003cp\u003eNEW FEATURES: In addition to all the previous FCST features, the new FCST-X version is packed with innovations. Quick lift and access to the surge pump (9 bolts in total). Integrated lift handle for fuel pump maintenance. Lightweight surge tank increased from 2.2L to 2.6L - Compatible with up to 4 brushless fuel pumps - Up to 4 Bosch BR540 (DW400) fuel pumps - Up to 3 Ti Automotive E5LM brushless pumps - Up to 4 Bosch (DW440) brushless pumps - Compatible with 16AN inlet mechanical pumps - Easily interchangeable pump modules (sold separately) - Compatible with covered level sensors - Designed with fewer potential leak points - Improved fluid control for quick filling - Optimized internal fluid management - Enhanced anti-roll protection - Anti-rotation electrical terminals\u003c\/p\u003e\n\n\u003cp\u003e20-1998\u003c\/p\u003e\n\n\u003cp\u003ePUMP COMPATIBILITY: Walbro F90000267 - Walbro F90000274 - Walbro F90000285 - Walbro F90000295 * Because this pump does not include a built-in check valve, multiple surge pumps must be used simultaneously (not staged). PDF Instructions\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688044605780,"sku":"USA-RAD-20-1998","price":565.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-1998new.jpg?v=1788963850"},{"product_id":"recipiente-de-repuesto-para-pila-de-combustible-de-10-galones-de-radium-engineering","title":"Radium Engineering 10 Gallon Fuel Cell Surge Tank","description":"\u003cp\u003eThis is a replacement aluminum housing that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells.\u003c\/p\u003e\n\n\u003cp\u003eEach replacement fuel cell housing includes: black powder-coated aluminum lid, black powder-coated aluminum base, Radium Engineering decal stickers, and stainless steel hardware.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688048963924,"sku":"USA-RAD-20-0670","price":457.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0670n_1.jpg?v=1788963823"},{"product_id":"deposito-de-combustible-fmic-eu-de-20-l-con-sensor-de-nivel-de-combustible","title":"FMIC.EU 20L Fuel Tank with Fuel Level Sender","description":"\u003cp\u003eFMIC.EU 20L Fuel Tank with Level Sensor\u003c\/p\u003e\n\n\u003cp\u003eThe FMIC.EU 20-liter fuel tank is a lightweight, durable, and high-quality construction designed for motorsports, track use, and vehicle customization. Made entirely of aluminum, it weighs only 3.5 kg. Its body is designed for competition, with full TIG welding ensuring excellent sealing, durability, and resistance to vibrations and pressure.\u003c\/p\u003e\n\n\u003cp\u003eThe tank is equipped with four AN10 ports, allowing for flexible fuel system configuration, pump installation, return lines, and venting. A high-quality aluminum filler cap ensures precise and leak-free sealing, even under heavy use.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its low weight and solid construction, the tank is particularly recommended for drift, autocross, 400-meter races, as well as high-performance and street vehicles. For track use with high lateral G-forces, it is recommended to use the tank in conjunction with a surge tank to ensure a consistent fuel supply.\u003cbr\u003e\n- Lightweight construction: only 3.5 kg - Integrated fuel level sensor - Fully TIG-welded aluminum body - Four AN10 ports - Aluminum filler cap: durable and precise - High resistance to heat, pressure, and competition conditions - Ideal for drift, autocross, drag racing, and street cars - Compatible with surge tanks\u003c\/p\u003e\n\n\u003cp\u003eTechnical specifications:\u003c\/p\u003e\n\n\u003cp\u003e- Dimensions: 31 x 31 x 22 cm - Capacity: 20 liters - Material: aluminum - Weight: 3.5 kg - Number of ports: 4 - Port thread: AN10 - Aluminum filler cap - Precision TIG welds - Competition-ready construction\u003c\/p\u003e","brand":"FMIC EU","offers":[{"title":"Default Title","offer_id":56688049652052,"sku":"TNKFMIC-TAS-20","price":191.58,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/tank-_-tnkfmic-tas-20_01.jpg?v=1788963914"},{"product_id":"sensor-de-nivel-de-combustible-nuke-performance-0-90-ohmios-16-406-mm","title":"Nuke Performance Fuel Level Sensor 0-90 Ohms - 16\" \/ 406 mm","description":"\u003cp\u003eISSPRO Fuel Level Sensor is compatible with Nuke Performance CFC Unit. 0-90 Ohm fuel level sensor available with or without fuel gauge, compatible with standard SAE 5-bolt mounting pattern. Compatible with Nuke Performance fuel cells:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08: 203mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 6.25 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 8 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 30 liter\u003cbr\u003e\nATL Saver Cell 45 liter\u003cbr\u003e\nWell Cell Saver Cell 45 liter\u003cbr\u003e\nATL Saver Cell 60 liter\u003cbr\u003e\nATL Saver Cell 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09: 228mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 10 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 12 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 15 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 18 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 22 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 40 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 20 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 40 liter\u003cbr\u003e\nWellcell Fuel Cell 45 liter AluCell Aluminum Fuel Tank 60 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-10: 254mm \/ 10\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12: 305mm \/ 12\"\u003cbr\u003e\nPyrotect 17 Gallon Fuel Tank\u003cbr\u003e\nAluCell Aluminum Fuel Tank 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-13: 330mm \/ 13\"\u003cbr\u003e\nPyrotect 24 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-15: 381mm \/ 15\"\u003cbr\u003e\nPyrotect 26 Gallon Fuel Tank\u003cbr\u003e\nPyrotect 32 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-16: 406mm \/ 16\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003eOhm resistance: 0 Ohm: Empty\u003cbr\u003e\n90 Ohm: Full\u003cbr\u003e\nOptional Specs: Also available in 240-33 Ohm\u003cbr\u003e\nFuel level sensors for motorsport and aftermarket fuel systems Compatible with the most common fuel cells including Pyrotect, ATL, Fuel Safe, Harmon, Premiere, Jaz and more, and is the perfect match for the Nuke Performance Competition Fuel Cell Unit. Can be ordered with or without a fuel level gauge.\u003c\/p\u003e\n\n\u003cp\u003eI have lost my adapter plate \/ spacer for the fuel level sensor unit, can I order a new one? My fuel level sensor unit does not fit the mounting point of the CFC unit, what should I do? An adapter plate \/ spacer is needed to mount a fuel level sensor with a larger diameter than the CFC unit's bore or using the common asymmetric 5-bolt pattern often found on aftermarket fuel level sensors. The spacer \/ adapter plate is included with all Nuke Performance CFC units upon purchase, if you lose it, you can order a replacement plate. A detailed mounting description can be found in the CFC unit's product manual here. Asymmetrical 5-bolt adapter plate. Part Number: 150-10-117\u003c\/p\u003e\n\n\u003cp\u003eApproved for all types of fuel, for all types of motorsports. Approved for gasoline. methanol, and ethanol. Available in various lengths, select size when placing your order. If you order together with a fuel cell, we make sure you get the correct one with your order.\u003c\/p\u003e\n\n\u003cp\u003eOrder fuel level gauge without fuel level sensor. If you need a fuel level gauge and already bought the sensor, you can acquire the gauge as an accessory if you need it. Fuel Gauge: Resistance (0-90 Ohm). Part Number: 150-FLG-01\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688055026004,"sku":"NP-150-FLS-16-01","price":229.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NukePerformanceFLS-0-90_6_81b9ea1b-8d61-4830-acdc-44e86e461b19.jpg?v=1788963946"},{"product_id":"kit-de-manguera-para-cuello-de-llenado-de-combustible-de-15-pulgadas-20-0597-radium-engineering","title":"1.5 inch Fuel Filler Neck Hose Kit, 20-0597, Radium Engineering","description":"\u003cp\u003eThis hose has a convoluted design that allows for tight bends, as shown below. The helical wires prevent the hose from kinking.\u003c\/p\u003e\n\n\u003cp\u003eIt is compatible with all types of fuel and has a long service life.\u003c\/p\u003e\n\n\u003cp\u003eHOSE SPECIFICATIONS 20-0597\u003c\/p\u003e\n\n\u003cp\u003eInner diameter: 38 mm (1.5\")\u003c\/p\u003e\n\n\u003cp\u003eWall thickness: 4.47 mm (0.176\")\u003c\/p\u003e\n\n\u003cp\u003eLength: 914 mm (3 ft)\u003c\/p\u003e\n\n\u003cp\u003eWorking pressure: 20 psi (maximum)\u003c\/p\u003e\n\n\u003cp\u003eBurst pressure: 90 psi (minimum)\u003c\/p\u003e\n\n\u003cp\u003eBending radius: 12.7 cm (5\") (minimum)\u003c\/p\u003e\n\n\u003cp\u003eTube material: Nitrile\u003c\/p\u003e\n\n\u003cp\u003eReinforcement: Synthetic fabric\u003c\/p\u003e\n\n\u003cp\u003eFlexibility: Two integrated helical wires\u003c\/p\u003e\n\n\u003cp\u003eLining: Neoprene-coated fabric\u003c\/p\u003e\n\n\u003cp\u003eTemperature range: -40 °F to 212 °F (-40 °C to 100 °C)\u003cbr\u003e\nStandards: SAE 30R5\u003c\/p\u003e\n\n\u003cp\u003eMade in USA\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688055222612,"sku":"USA-RAD-20-0597","price":113.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/wez-wlewu-paliwa-1-5-20-0597-radium-engineering.jpg?v=1788963936"},{"product_id":"tapa-de-la-celda-de-combustible-fmic-eu-12-tornillos-negra","title":"FMIC.EU 12-bolt black fuel cell cap","description":"\u003cp\u003eFMIC.EU 12-Bolt Fuel Filler Cap, Black\u003c\/p\u003e\n\n\u003cp\u003eThe FMIC.EU fuel filler cap is a durable and lightweight cover designed for fuel cells and tanks. Made of anodized aluminum, it offers high resistance to fuel, oils, and corrosion, while the included gasket ensures a completely sealed, leak-free connection.\u003c\/p\u003e\n\n\u003cp\u003eIt is compatible with fuel cells featuring a 12-bolt pattern (13.6 cm bolt circle), serving as a direct replacement for plastic filler caps. It can also be used on OEM fuel tanks.\u003c\/p\u003e\n\n\u003cp\u003eProduct Features: - Compatible with most 12-bolt fuel cells (13.6 cm bolt pattern) - High sealing performance: rubber gasket included - Corrosion-resistant anodized aluminum - Lightweight and durable construction\u003c\/p\u003e\n\n\u003cp\u003eTechnical Specifications: - Mounting: 12 bolts - Bolt circle: 13.6 cm - Diameter: 160 mm - Material: Anodized aluminum\u003c\/p\u003e\n\n\u003cp\u003ePackage includes: - Fuel filler cap - Gasket\u003c\/p\u003e","brand":"FMICEU","offers":[{"title":"Default Title","offer_id":56688055615828,"sku":"CAP-02-BLACK","price":58.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CAP-02-BLACK_DSC_9235.jpg?v=1788963884"},{"product_id":"interruptor-de-nivel-de-combustible-e-indicador-de-diagnostico-radium-engineering","title":"Radium Engineering Fuel Level Sender and Diagnostic Gauge","description":"\u003cp\u003eThis switch is only compatible with Radium Multi-Pump Fuel Surge Tanks (MPFST) and Radium Fuel Cell Surge Tanks (FCST). Both of these products feature special machined ports labeled “Level Switch.”\u003c\/p\u003e\n\n\u003cp\u003eThis 1\/8” NPT fuel level switch must be installed inside the container.\u003c\/p\u003e\n\n\u003cp\u003eWhen the fuel level drops, a switched signal can be sent to a unit, such as a dash-mounted gauge or a programmable ECU input, for safety. The level switch is constructed from corrosion-resistant stainless steel and is compatible with all fuel types. It includes 24\" long, 20AWG wires.\u003c\/p\u003e\n\n\u003cp\u003eNOTES:\u003c\/p\u003e\n\n\u003cp\u003e1. Before installation, verify the direction of the signal on a test bench.\u003c\/p\u003e\n\n\u003cp\u003e2. The polarity of the switch can easily be reversed by removing the retaining clip and flipping the float.\u003cbr\u003e\n3. A 1\/8” NPT threaded port is required for installation.\u003c\/p\u003e\n\n\u003cp\u003e4. Always apply PTFE pipe thread sealant to the tapered pipe threads.\u003cbr\u003e\nIf using the 20-0461 Fuel Level Switch (above), this 20-0508 Fuel Level Diagnostic Indicator can be used as a visual reference for fuel level.\u003c\/p\u003e\n\n\u003cp\u003eWhen the fuel level switch is activated, the signal is sent directly to this LED.\u003c\/p\u003e\n\n\u003cp\u003eWhile often not practical to view while driving, this indicator can be used to diagnose a potential fueling issue.\u003c\/p\u003e\n\n\u003cp\u003eNOTES:\u003c\/p\u003e\n\n\u003cp\u003e1. A 2AN ORB (5\/16\"-24) threaded port is required for installation.\u003c\/p\u003e\n\n\u003cp\u003e2. If stacked on top of the fuel level switch (as pictured above), panel thickness must be at least 0.75\".\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688056402260,"sku":"USA-RAD-20-0519","price":126.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/sygnalizator-poziomu-paliwa-i-wskaznik-diagnostyczny-radium-engineering.jpg?v=1788963878"},{"product_id":"sensor-de-nivel-de-combustible-nuke-performance-240-33-ohmios-12-305-mm","title":"Nuke Performance Fuel Level Sensor 240-33 ohm - 12\" \/ 305 mm","description":"\u003cp\u003eThe ISSPRO fuel level sensor is compatible with the Nuke Performance CFC Unit. 240-33 Ohm fuel level sensor available with or without a fuel gauge, compatible with the standard SAE 5-bolt mounting pattern. Compatible with Nuke Performance Fuel Cells:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08-240: 203 mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 6.25 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 8 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 30 Liters\u003cbr\u003e\nATL Saver Cell 45 Liters\u003cbr\u003e\nWell Cell Saver Cell 45 Liters\u003cbr\u003e\nATL Saver Cell 60 Liters\u003cbr\u003e\nATL Saver Cell 80 Liters\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09-240: 228 mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 10 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 12 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 15 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 18 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 22 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 40 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 20 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 40 Liters\u003cbr\u003e\nAluCell Aluminum Fuel Cell 60 Liters\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-10-240: 254 mm \/ 10\"\u003c\/p\u003e\n\n\u003cp\u003eNot available\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12-240: 305 mm \/ 12\"\u003cbr\u003e\nPyrotect 17 Gallon Fuel Cell. AluCell Aluminum Fuel Cell 80 Liters.\u003c\/p\u003e\n\n\u003cp\u003eResistance: 240 Ohm (empty), 33 Ohm (full).\u003c\/p\u003e\n\n\u003cp\u003eOptional Specifications: Also available in 0-90 Ohms.\u003c\/p\u003e\n\n\u003cp\u003eFuel level sensors for motorsports and aftermarket fuel cells. Compatible with most common fuel cells including Pyrotect, ATL, Fuel Safe, Harmon, Premiere, Jaz, and more. It is the perfect match for the Nuke Performance Competition Fuel Cell Unit.\u003c\/p\u003e\n\n\u003cp\u003eI have lost the adapter plate\/spacer for my fuel level sensor. Can I order a new one? My fuel level sensor does not fit the mounting point of the CFC unit. What should I do? An adapter plate\/spacer is needed to mount a fuel level sensor with a larger diameter than the CFC unit's bore or which uses the common asymmetric 5-bolt pattern on aftermarket fuel level sensors. The adapter plate\/spacer is included with all Nuke Performance CFC Units when purchased. If you lose it, a replacement plate can be ordered. A detailed mounting description can be found in the CFC unit product manual here. Asymmetric 5-bolt adapter plate. Part Number: 150-10-117\u003c\/p\u003e\n\n\u003cp\u003eApproved for all types of fuels and for all types of motorsports. Approved for gasoline, methanol, and ethanol. Available in various lengths; choose the size when placing your order. If ordered together with a fuel cell, we will ensure you receive the correct one with your order.\u003cbr\u003e\nOrder fuel level gauge without fuel level sending unit. If you need a fuel level gauge and have already purchased the sending unit, you can purchase the gauge as an accessory if needed. Fuel Gauge. Resistance (OHM): 240-33 Ohm. Part Number: 150-FLG-01-240\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688061645140,"sku":"NP-150-FLS-12-240","price":244.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NukePerformanceFLS-240-33.jpg?v=1788963918"},{"product_id":"sensor-de-nivel-de-combustible-0-90-ohm-8-0in-con-cubierta-protectora-radium-engineering","title":"Fuel level sensor 0-90 ohm, 8.0in with Radium Engineering protective cover","description":"\u003cp\u003eATTENTION:\u003c\/p\u003e\n\n\u003cp\u003e1. The Radium 20-0847-XXX fuel level float cover is only compatible with the new Radium FCSTs (20-099X-XX).\u003c\/p\u003e\n\n\u003cp\u003e2. For previous versions of the Radium FCST 20-049X-XX and 20-069X-XX, the Radium 20-0747-XXX without a cover must be used.\u003c\/p\u003e\n\n\u003cp\u003e3. The Radium 20-0747-203 and 20-0747-297 level sensors without a cover are compatible with all Radium FCST part numbers.\u003c\/p\u003e\n\n\u003cp\u003eThis fuel level sensor uses the standard 5-bolt SAE mounting pattern, widely used with the Radium fuel surge tank.\u003c\/p\u003e\n\n\u003cp\u003eFully sealed stainless steel construction with a magnetic float.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for gasoline, diesel, water, and all alcohol-based fuels, including methanol, ethanol, E85, etc.\u003c\/p\u003e\n\n\u003cp\u003eNOTES:\u003c\/p\u003e\n\n\u003cp\u003e-All level sensors have a resistance of 0 ohms (empty fuel) to 90 ohms (full fuel) (common in many aftermarket gauges).\u003c\/p\u003e\n\n\u003cp\u003e-Radium does not sell fuel level gauges, but a popular option is this Autometer fuel level gauge.\u003c\/p\u003e\n\n\u003cp\u003e-To test the sensor, measure the resistance between the two wires while tilting it so that the float moves.\u003c\/p\u003e\n\n\u003cp\u003e-If purchased together with a Radium Fuel Surge Tank (FCST), the sensor will come pre-installed.\u003c\/p\u003e\n\n\u003cp\u003e-If the output of this sensor is not compatible with your original fuel gauge, consider a resistance signal converter, which you can find here.\u003cbr\u003e\n(Radium Engineering has no experience with this product; for more information, contact Classic Instruments).\u003c\/p\u003e\n\n\u003cp\u003eSPECIFICATIONS:\u003c\/p\u003e\n\n\u003cp\u003ePROBE MATERIAL: 304 stainless steel\u003cbr\u003e\nFLOAT MATERIAL: Buna-N plastic\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING FLANGE: 5-bolt SAE\u003c\/p\u003e\n\n\u003cp\u003eMOUNTING GASKET: FKM\u003c\/p\u003e\n\n\u003cp\u003eRESISTANCE: 0 (Empty) - 90 (Full) ohms\u003cbr\u003e\nPVC WIRES: 460 mm (18\") with PA sleeve\u003c\/p\u003e\n\n\u003cp\u003eCONNECTORS: Deutsch DT, 2P\u003cbr\u003e\nOPERATING TEMPERATURE: -40°F to +185°F\u003cbr\u003e\nINCLUDES:\u003c\/p\u003e\n\n\u003cp\u003e-Level sensing probe\u003cbr\u003e\n-5-bolt SAE GASKET\u003cbr\u003e\n-10-32 stainless steel screws (x5)\u003c\/p\u003e\n\n\u003cp\u003eDeutsch DT 2P connector\u003cbr\u003e\n-Deutsch DT terminals (x2)\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688069738836,"sku":"USA-RAD-20-0847-203","price":113.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/fuel-level-sender-0-90-ohm-8-0in-shrouded-radium-engineering_4.jpg?v=1788963946"},{"product_id":"kit-de-subarnes-para-celdas-de-combustible-de-radium-engineering","title":"Radium Engineering Fuel Cell Sub-Harness Kit","description":"\u003cp\u003eOVERVIEW The auxiliary fuel cell harness kit is an excellent accessory for faster pit stops. It is common for racers to have a spare FCST-X Fuel Pump Module in the pit lane in case an issue arises with the fuel pump, electrical wiring, etc. With an auxiliary harness on both FCST-X units, the entire pump assembly can be quickly interchanged without requiring any tools.\u003c\/p\u003e\n\n\u003cp\u003eCOMPATIBILITY - RADIUM ENGINEERING FCST-X (or FCST) Each of the 26 10AWG pre-terminated wires has a unique identification label associated with FCST-X labeling. However, they can also be used with the older FCST, which has slightly different labeling.\u003c\/p\u003e\n\n\u003cp\u003e- RADIUM ENGINEERING RA-SERIES FUEL CELLS Specifically designed to mount to the perimeter of RA Series Fuel Cells. For another fuel cell to be directly compatible, bolt spacing must be 3.6\"-5.7\" (91-145mm). The bolt hole spacing of the bulkhead bracket is compatible with all Radium Engineering RA Series Fuel Cells. It can be mounted anywhere along the perimeter of the fuel cell. Furthermore, the bracket can be rotated inboard or outboard for a 3-inch (76mm) difference in location.\u003c\/p\u003e\n\n\u003cp\u003eHOW THE MOUNT WORKS: 1. Install the labeled ring terminal wires to the FCST-X studs. 2. Install the bracket using the fuel cell hardware. 3. Assemble the bulkhead connector to the bracket. 4. Cut and crimp contacts to wires. 5. Install contacts into the connector. 6. Install plug seals into all open cavities. 7. Assemble and route the chassis harness. Click the instruction link for more detailed information.\u003c\/p\u003e\n\n\u003cp\u003eWHAT IS NEEDED: 1. For the stamped contacts, an open barrel crimper is required. 2. Although contacts for the connector are provided, wiring for the chassis harness is not included. 3. While not necessary, wire conduit (expandable sleeving, cloth tape, etc.) is not included.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eINCLUDES\u003c\/p\u003e\n\n\u003cp\u003e- Anodized Aluminum Fuel Cell Mounting Bracket - Sealed CPC Female Connector for Outdoor Use - Sealed CPC Male Connector for Outdoor Use - Stamped 14-10 AWG Open Barrel Female Contacts (x16) - Stamped 14-10 AWG Open Barrel Male Contacts (x16) - Black Straight Rubber Boot - Black Right Angle Rubber Boot - Bulkhead Panel Hex Nut - Bulkhead Locking Wavy Washer - Empty Cavity Plugs (x25) - Cable Ties (x5) - Labeled 10 AWG Wire with Pre-terminated Ring Terminals (x26)\u003c\/p\u003e\n\n\u003cp\u003eInstructions PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688072032596,"sku":"USA-RAD-20-0774","price":424.97,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0774n.jpg?v=1788963855"},{"product_id":"pila-de-combustible-nuke-performance-alucell-de-45-l-con-unidad-cfc-nuke-performance","title":"Nuke Performance 45L AluCell Fuel Cell with Nuke Performance CFC Unit","description":"\u003cp\u003eNuke Performance AluCell aluminum fuel cells – a lightweight and affordable option – combined with the Nuke Performance CFC (Competition Fuel Cell) unit. This product offers a cost-effective solution for those who do not require FIA approval for professional competition but want to enjoy all the advantages of the Nuke Performance CFC unit. The fuel pump hanger with integrated surge tank provides this functionality, including:\u003c\/p\u003e\n\n\u003cp\u003eAluminum fuel cell in 20 \/ 40 \/ 45WC \/ 60 \/ 80 liters. Integrated 2-liter surge tank. Suitable for all types of fuel, including E85. Integrated brackets for easy and secure mounting. Compatible with single or dual high-pressure fuel pumps. Oversized AN-10 ORB outlet for maximum flow. NEW: Now available in a new 45-liter version. Low-profile fuel filler cap with integrated roll-over valve.\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance AluCell fuel cells are compatible with carbureted fuel systems and with the integrated CFC unit from Nuke Performance. They eliminate the need for an external surge tank, which is essential for the operation of a fuel cell, making them the perfect alternative for fuel injection systems. AluCell cells are manufactured from the highest quality aluminum for use with all fuel types and are approved for gasoline, methanol, and ethanol.\u003c\/p\u003e\n\n\u003cp\u003eThey include an integrated 2-liter surge tank and a machined hanger for 1 or 2 fuel pumps. AluCell aluminum fuel cells are delivered with the Nuke Performance CFC unit as a replacement for the fill plate. The unique Nuke Performance CFC unit is the ideal solution for a simplified high-performance fuel system, where simplicity and durability are paramount. This setup eliminates the need for a space-consuming external surge tank. With all necessary fuel pumps integrated into the cell itself, this is the only component you need. This frees up space and weight, and increases safety as fewer fuel line connections are required, and no external fuel pumps are used. Internal high-pressure fuel pumps, for any need between 200 and 2000hp. The AluCell is delivered with the unique Nuke Performance CFC unit, which incorporates an integrated fuel surge tank. It is compatible with single or dual high-pressure fuel pumps from Deatschwerks, AEM, Ti Automotive, Walbro, Bosch, Fuelab, Aeromotive, and many more. It fits all common 39mm fuel pumps, as well as larger pumps like the Deatschwerks DW400, Walbro GST450\/GST520, Bosch BR540, and Aeromotive Stealth 450. Thanks to the internal surge tank, this solution ensures a constant fuel flow for power outputs between 200 and 2000hp, without supply issues, even under demanding driving conditions.\u003c\/p\u003e\n\n\u003cp\u003eThe CFC unit is compatible with most common fuel pumps. Together with Nuke Performance fuel pump mounting kits, setting up a high-performance fuel system has never been easier. How are the fuel pumps mounted inside the fuel tank and the AluCell surge tank? The single tank-mounted fuel pump acts as a pickup pump, ensuring that the high-pressure fuel pumps within the oversized 2-liter (0.53 US gallon) surge tank always have enough fuel to maximize flow and minimize the risk of fuel starvation, which can severely damage the engine. For more information, please download the product manual. The CFC unit comes with everything needed to install your choice of fuel pumps, but we recommend adding one of our fuel pump mounting kits for optimal operation. All fuel pumps are securely mounted in any condition thanks to the machined fuel pump brackets.\u003c\/p\u003e\n\n\u003cp\u003eOur wide variety of connections and mounting possibilities suits all your fuel delivery needs in an aftermarket fuel system. The Nuke Performance CFC (Competition Fuel Cell) unit, with an integrated surge tank, is now equipped with ORB threads instead of the UNF threads they initially used. The AN-10 ORB outlet port and AN-8 ORB return port let you choose from various available ORB connections. Using the oversized, high-flow AN-10 ORB outlet integrates the internal fuel pumps into a single line, minimizing the need for external equipment, hoses, and connections. The included roll-over protected vent connection is AN-6 (3\/4 UNF) and can be replaced with AN-6 to AN-10 when needed. AN-6, AN-8, AN-10, and AN-12 outlet and return connections are sold separately as accessories. Outlet connectors: AN-10 ORB to AN-6 Male, Part #: 700-04-108; AN-10 ORB to AN-8 Male, Part #: 700-04-109; AN-10 ORB to AN-10 Male, Part #: 700-04-110; AN-10 ORB to AN-12 Male, Part #: 700-04-111. Return connectors: AN-8 ORB to AN-6 Male, Part #: 700-04-104; AN-8 ORB to AN-8 Male, Part #: 700-04-105; AN-8 ORB to AN-10 Male, Part #: 700-04-106; AN-8 ORB to AN-12 Male, Part #: 700-04-107.\u003c\/p\u003e\n\n\u003cp\u003eNEW: The AN-6 Fuel Cell Vent Kit connects directly to the CFC unit's vent valve for easy installation. The CFC unit is equipped with an AN-8 (3\/4 UNF) to AN-6 Male vent fitting with roll-over protection. The easiest way to route the vent line into a safe and functional position is by using a Nuke Performance fuel cell vent kit. Available in various sizes from AN-6 to AN-12, you can choose the kit that best suits your needs. If you wish to use a larger diameter vent line than AN-6, you will also need to change the fitting on the vent valve. The vent kit includes a 1m (3.3ft) nitrile fuel hose and a universal air filter that prevents debris from entering the fuel system.\u003c\/p\u003e\n\n\u003cp\u003eLightweight 20\/40\/45\/60\/80-liter aluminum fuel cell with integrated brackets. To ensure the highest quality, the AluCells are manufactured from two pieces of aluminum and automatically welded by a 5-axis welding robot. Each is individually pressure tested before surface treatment to ensure maximum functionality and compliance with CE certification specifications. Thanks to the use of high corrosion-resistant aluminum (5083 H111), it does not require internal anodizing or powder coating that is affected by alcohol fuels such as ethanol. This prevents damage to injectors and filters when the coating dissolves. Over time, a slight color variation may occur inside the fuel tank, especially when using alcohol fuels, but this does not affect its function. Choose from 20-liter (5.28 gallons), 40-liter (10.56 gallons), 45-liter (11.88 gallons), 60-liter (15.85 gallons), and 80-liter (21.13 gallons) versions.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped, designed, and manufactured in Sweden by Nuke Performance. The Nuke Performance Competition Fuel Cell unit and AluCell fuel tanks are of the highest quality and bear the same hallmark as all other Nuke Performance lightweight motorsport products. Nuke Performance parts are developed in collaboration with motorsport teams worldwide, ensuring that both functionality and design meet the highest standards, and even setting their own. Order our comprehensive, affordable, and practical fuel cell solution and experience the convenience and performance of our easy-to-install AluCell fuel cells.\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance quality is second to none.\u003c\/p\u003e\n\n\u003cp\u003eAluCell Specifications: For more information about specifications, please refer to the product manual.\u003c\/p\u003e\n\n\u003cp\u003eAluCell 20 Liter Part No\u003c\/p\u003e\n\n\u003cp\u003e150-07-021\u003c\/p\u003e\n\n\u003cp\u003eLength\u003cbr\u003e\n330 mm (12.99”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003cbr\u003e\n330 mm (12.99”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003cbr\u003e\n260 mm (10.23”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003cbr\u003e\n6830 g (15.05 lb), incl. CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003cbr\u003e\n20 Liters (5.28 US Gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209500349\u003c\/p\u003e\n\n\u003cp\u003eAluCell 40 Liter Part No\u003c\/p\u003e\n\n\u003cp\u003e150-07-041\u003c\/p\u003e\n\n\u003cp\u003eLength\u003cbr\u003e\n555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003cbr\u003e\n377 mm (14.84”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003cbr\u003e\n251 mm (9.88”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003cbr\u003e\n9050 g (19.95 lb), incl. CFC Unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e40 Liters (10.56 US Gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003c\/p\u003e\n\n\u003cp\u003e7340209500356\u003c\/p\u003e\n\n\u003cp\u003eAluCell 45 Liter \"WellCell\" Part No\u003cbr\u003e\n150-07-151\u003c\/p\u003e\n\n\u003cp\u003eLength without flange\u003c\/p\u003e\n\n\u003cp\u003e528\/630 mm (20.79\/24.80”)\u003c\/p\u003e\n\n\u003cp\u003eDepth without flange\u003c\/p\u003e\n\n\u003cp\u003e498\/560 mm (19.60\/22.05”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e225 mm (8.86”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003e10850 g (23.92 lb), incl. CFC Unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e45 Liters (11.88 US Gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209506990\u003c\/p\u003e\n\n\u003cp\u003eAluCell 60 Liter Part No:\u003c\/p\u003e\n\n\u003cp\u003e150-07-061\u003c\/p\u003e\n\n\u003cp\u003eLength:\u003c\/p\u003e\n\n\u003cp\u003e577 mm (22.71”)\u003c\/p\u003e\n\n\u003cp\u003eDepth:\u003c\/p\u003e\n\n\u003cp\u003e555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eHeight:\u003c\/p\u003e\n\n\u003cp\u003e250 mm (9.84”)\u003c\/p\u003e\n\n\u003cp\u003eWeight:\u003c\/p\u003e\n\n\u003cp\u003e11950 g (26.34 lb), incl. CFC Unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e60 Liters (15.85 US Gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003c\/p\u003e\n\n\u003cp\u003e7340209500363\u003c\/p\u003e\n\n\u003cp\u003eAluCell 80 Liter Part No\u003cbr\u003e\n150-07-081\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e577 mm (22.71”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e320 mm (12.59”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003e13520 g (29.80 lb), incl. CFC Unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e80 Liters (21.13 US Gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsport Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003c\/p\u003e\n\n\u003cp\u003e7340209505498\u003c\/p\u003e\n\n\u003cp\u003eAluCell fuel cell kit includes: 1 pc. AluCell aluminum fuel cell 20 Liter \/ 40 Liter \/ 60 Liter \/ 80 Liter 1 pc. Nuke Performance CFC Unit – low profile version 2 pcs. 1\/4\" BSPP to 8mm hose barb fittings 1 pc. 1\/4\" BSPP plug, for use with a single high-pressure fuel pump 2 pcs. 39mm inserts for high-pressure fuel pump bracket 1 pc. Viton gasket for fuel cells with 24-bolt pattern (suitable for alcoholic fuels) 1 pc. low-profile filler cap (remote filler neck available as an accessory) 1 pc. machined aluminum dual fuel pump hanger and adjustable pick-up pump bracket 1 pc. AN-8 (3\/4 UNF) to AN-6 Male vent safety valve 1 pc. FLS spacer, for fuel level sensors with asymmetric bolt pattern 24 pcs. 1\/4-28 UNF x 1” screws with nylon washers\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688082059604,"sku":"NP-150-07-151","price":1664.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/3133-82-150-07-151_01.jpg?v=1788963923"},{"product_id":"jaula-soldable-para-pila-de-combustible-de-10-galones-radium-engineering","title":"Weldable Fuel Cell Cage for 10 Gallon Fuel Cell, Radium Engineering","description":"\u003cp\u003eA welded cage makes fuel cell installation easier by providing a pre-fabricated, secure, and robust base. The cage is constructed from 2.5 cm x 2.5 cm x 1.6 mm stainless steel tubing. It is TIG welded by hand and polished. Because it's not mild carbon steel, it's resistant to corrosion!\u003c\/p\u003e\n\n\u003cp\u003eWelding is required and should be done by a professional.\u003c\/p\u003e\n\n\u003cp\u003eThe fuel cell fits snugly into the cage and is secured by the included anodized aluminum straps. All parts are corrosion resistant.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688087335252,"sku":"USA-RAD-20-0910","price":534.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/stelaz-na-zbiornik-paliwa-10-galonow-radium-engineering_4.jpg?v=1788963917"},{"product_id":"atl-saver-cell-wellcell-de-45-litros-con-unidad-cfc-nuke-performance","title":"ATL Saver Cell Wellcell 45 Liter with CFC Nuke Performance Unit","description":"\u003cp\u003eATL Saver Cells are lightweight and FIA FT3-1999 homologated for all major racing and motorsport associations.\u003c\/p\u003e\n\n\u003cp\u003eThe well-renowned Saver Cells, made from a tough and unique plastic alloy, are paired with the Nuke Performance CFC unit (an easy-to-install fuel pump hanger with an integrated surge tank). Safe and easy to use, they make for the optimal all-in-one solution for all motorsport applications.\u003c\/p\u003e\n\n\u003cp\u003eFIA FT3-1999 homologated Fuel Cell\u003c\/p\u003e\n\n\u003cp\u003eAvailable in a variety of sizes to suit all needs\u003c\/p\u003e\n\n\u003cp\u003eIntegrated 2-liter fuel surge tank function\u003c\/p\u003e\n\n\u003cp\u003eFull foam baffling for both gasoline and E85\u003c\/p\u003e\n\n\u003cp\u003eCompatible with single or dual high-pressure fuel pumps\u003c\/p\u003e\n\n\u003cp\u003eNew high-profile CFC Unit compatible with all ATL Fuel Cells\u003c\/p\u003e\n\n\u003cp\u003eLow-profile fuel filler cap with integrated roll-over valve\u003c\/p\u003e\n\n\u003cp\u003eAN-10 ORB outlet \/ AN-8 ORB return\u003c\/p\u003e\n\n\u003cp\u003eATL Saver Cells are suitable for carburetor fuel systems, and thanks to the integrated Nuke Performance high-profile CFC Unit, it eliminates the need for an external surge tank (which is usually necessary when using a fuel cell). They are ideal for fuel injection systems. Our selection of Saver Cells includes yellow foam for both gasoline and E85.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated 2-liter surge tank, machined fuel pump hanger for 1 or 2 pumps\u003c\/p\u003e\n\n\u003cp\u003eThe cells are delivered with the new Nuke Performance high-profile CFC Unit as a replacement for the filler plate. The new high-performance CFC Unit is the perfect solution for a streamlined and high-performing fuel system where safety is paramount. This setup eliminates the need for an external surge tank that takes up a lot of space. With all necessary fuel pumps integrated into the fuel cell itself, this is all you need. This frees up space and weight, and increases safety as fewer connections in the fuel line are needed and no external fuel pumps are used.\u003c\/p\u003e\n\n\u003cp\u003eInternal high-pressure fuel pumps, for any need between 200 - 2000 hp.\u003c\/p\u003e\n\n\u003cp\u003eThe ATL Fuel Cells are delivered with the unique Nuke Performance CFC Unit, which features an integrated surge tank, and is compatible with single or dual high-pressure fuel pumps from Deatschwerks, AEM, Ti Automotive, Walbro, Bosch, Fuelab, Aeromotive, and many more. It is compatible with all common 39mm fuel pumps, as well as larger ones such as Deatschwerks DW400, Walbro GST450\/520, Bosch BR540, and Aeromotive Stealth 450. This solution provides constant fuel flow for power outputs between 200 and 2000 horsepower, with no fuel cuts, even under demanding driving conditions, thanks to the internal surge tank and the in-tank foam baffling system.\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance high-performance fuel cell unit is compatible with most common fuel pumps. Together with Nuke Performance fuel pump mounting kits, setting up a high-performance fuel system has never been easier.\u003c\/p\u003e\n\n\u003cp\u003eHow are the fuel pumps mounted inside the ATL Saver Surge Tank?\u003cbr\u003e\nThe single fuel pump mounted in the fuel tank works as a pickup pump, ensuring that the high-pressure fuel pumps within the oversized 2-liter (0.53-gallon) surge tank always have enough fuel to maximize flow and minimize the risk of fuel starvation, which could severely damage the engine. For more information, please refer to the product manual. The high-performance CFC unit is delivered with everything needed to install your choice of fuel pumps, but we recommend adding one of our fuel pump mounting kits for optimal operation. All fuel pumps are securely mounted in any condition thanks to the machined fuel pump brackets.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for all types of motorsport use and available in a wide variety of sizes.\u003c\/p\u003e\n\n\u003cp\u003eThe new Nuke Performance high-performance Competition Fuel Cell Unit comes prepared for AN-10 ORB outlet and AN-8 ORB return inlet, with a wide variety of sizes available. Using the oversized high-flow AN-10 ORB outlet combines the internal fuel pumps into a single fuel line and minimizes the need for external equipment, hoses, and fittings. The included AN-6 (3\/4 UNF) roll-over protected vent fitting can be replaced with an AN-6 to AN-10 when needed. AN-6, AN-8, AN-10, and AN-12 outlet and return fittings are sold separately as accessories. Outlet connectors:\u003c\/p\u003e\n\n\u003cp\u003eAN-10 ORB to AN-6 male. Part No: 700-04-108\u003c\/p\u003e\n\n\u003cp\u003eAN-10 ORB to AN-8 male. Part No: 700-04-109\u003c\/p\u003e\n\n\u003cp\u003eAN-10 ORB to AN-10 male. Part No: 700-04-110\u003c\/p\u003e\n\n\u003cp\u003eAN-10 ORB to AN-12 male. Part No: 700-04-111\u003cbr\u003e\nReturn connectors:\u003c\/p\u003e\n\n\u003cp\u003eAN-8 ORB to AN-6 male. Part No: 700-04-104\u003c\/p\u003e\n\n\u003cp\u003eAN-8 ORB to AN-8 male. Part No: 700-04-105\u003c\/p\u003e\n\n\u003cp\u003eAN-8 ORB to AN-10 male. Part No: 700-04-106\u003c\/p\u003e\n\n\u003cp\u003eAN-8 ORB to AN-12 male. Part No: 700-04-107\u003c\/p\u003e\n\n\u003cp\u003eFull foam baffles in an affordable FIA-approved fuel tank.\u003c\/p\u003e\n\n\u003cp\u003eATL Saver Cells are FIA FT3-1999 approved for use in major motorsport competitions worldwide. However, if used in FIA or FT3 competitions, they must be housed in an aluminum container. When ordering, please select if you wish to add the container. It is not recommended to manufacture your own container without consulting with ATL, as any sizing issue could invalidate the warranty. ATL 30-liter tank. Part No: 150-SA-AA-041\u003c\/p\u003e\n\n\u003cp\u003eATL 40-liter tank. Part No: 150-SA-AA-051\u003c\/p\u003e\n\n\u003cp\u003eATL 45-liter tank. Part No: 150-SA-AA-061\u003c\/p\u003e\n\n\u003cp\u003eATL 60-liter tank. Part No: 150-SA-AA-071\u003c\/p\u003e\n\n\u003cp\u003eATL 80-liter tank. Part No: 150-SA-AA-101\u003c\/p\u003e\n\n\u003cp\u003eFIA-approved ATL Well Cell fuel tank, which installs directly into the spare tire well and comes with the CFC unit.\u003c\/p\u003e\n\n\u003cp\u003eReplacing the original fuel tank with an FIA-approved one has never been easier. The 45-liter ATL Well Cell tank installs directly into the spare tire well and houses the Nuke Performance CFC unit. For this tank, no aluminum container is available, but if you use the original well, you only need to add a lid.\u003c\/p\u003e\n\n\u003cp\u003eHow does the Nuke Performance Competition Fuel Cell Unit work?\u003c\/p\u003e\n\n\u003cp\u003eThe CFC unit functions as a fuel pump hanger with an integrated surge tank for motorsport applications where safety and functionality are paramount. It is designed to be mounted directly into an aftermarket fuel tank with a standard 24-bolt pattern. For more information on the functionality of the CFC unit, watch our YouTube video explaining its functions or visit our FAQ guide for more details on the CFC unit.\u003c\/p\u003e\n\n\u003cp\u003eHow are the fuel pumps connected to the electrical connectors and fuel lines?\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance CFC unit uses oversized electrical connectors, ensuring a foolproof setup. You won't have to worry about overloading the connectors when operating with high current. For the lift fuel pump, you have two electrical connectors, and for the high-pressure fuel pumps, you have a total of three connectors, allowing for a two-stage or simultaneous dual fuel pump setup, if preferred. The fuel line connects to the included fittings, but we recommend adding one of the fuel pump mounting kits for the selected pumps to get all the benefits of easy maintenance, foolproof operation, and long lifespan, even with alcoholic fuels such as ethanol.\u003c\/p\u003e\n\n\u003cp\u003eLow-profile fuel filler cap or remote filler neck for 50mm hose?\u003c\/p\u003e\n\n\u003cp\u003eThe CFC unit is delivered with a low-profile filler cap with integrated roll-over protection. For those who prefer remote filling, we offer a remote filler neck for 50-52mm hoses. It attaches directly to the CFC unit and uses the integrated roll-over protection on the underside of the unit. The remote filler neck is available as an accessory.\u003c\/p\u003e\n\n\u003cp\u003eRemote filler neck for 50mm fuel hose. Part No: 150-05-202\u003c\/p\u003e\n\n\u003cp\u003eChoose the right fuel level sensor for your aftermarket fuel tank.\u003c\/p\u003e\n\n\u003cp\u003eFor most applications, an accurate fuel level sensor is required for optimal performance. The Nuke Performance high-profile CFC unit is compatible with most common fuel level sensors using the SAE 5-bolt pattern. The CFC unit is delivered with a lightweight, low-profile blanking plate that can be easily replaced with a fuel level sensor of your choice. You can receive your CFC unit with a fuel level sensor (FLS); be sure to select the correct length when ordering. For ATL fuel cells, add a fuel level sensor, and we will send you the correct length fuel level sensor for your cell.\u003c\/p\u003e\n\n\u003cp\u003eMade in Sweden to meet the high demands of global motorsports.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped in collaboration with motorsport teams around the world, it has become a common feature in disciplines such as time attack, drifting, and GT racing. Reducing weight is often as important as increasing power, and several of our customers have managed to reduce weight by more than 10 kg by upgrading to our compact and lightweight solutions. The ATL Saver Cell fuel cell with the Nuke Performance high-profile CFC unit is delivered in a perfect combination with the classic ATL Ltd. Saver Cells and the Nuke Performance Competition fuel unit, developed, designed, and manufactured in Sweden with the highest quality, the same hallmark as all other parts in the lightweight Nuke Performance motorsport range. Nuke Performance quality is second to none!\u003c\/p\u003e\n\n\u003cp\u003eThe ATL Saver Cell Fuel Cell Kit with CFC Unit includes:\u003c\/p\u003e\n\n\u003cp\u003e1 x ATL Saver Cell Fuel Cell (select size when ordering*)\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance high-profile Competition Fuel Unit\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-10 (7\/8 UNF) to AN-10 Male Outlet Connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-8 Male Return Connector\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) to AN-6 Male Vent Safety Valve\u003c\/p\u003e\n\n\u003cp\u003e* Please note that the optional aluminum container must be selected separately.\u003c\/p\u003e\n\n\u003cp\u003eATL Saver Cell Specifications\u003c\/p\u003e\n\n\u003cp\u003e30 Liter Saver Cell, Part No. 150-08-304\u003c\/p\u003e\n\n\u003cp\u003eLength: 505 mm (19.88”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 305 mm (12.00”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 223 mm (8.78”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available, including ATL CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity: 30 liters (7.92 gallons)\u003c\/p\u003e\n\n\u003cp\u003eContainer Part No: 150-SA-AA-041\u003c\/p\u003e\n\n\u003cp\u003e40 Liter Saver Cell, Part No. 150-08-404\u003c\/p\u003e\n\n\u003cp\u003eLength: 602 mm (23.70”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 314 mm (12.36”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 254 mm (10.00”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available, including CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity: 40 liters (10.56 gallons)\u003c\/p\u003e\n\n\u003cp\u003eContainer Part No: 150-SA-AA-051\u003c\/p\u003e\n\n\u003cp\u003e45 Liter Saver Cell, Part No. 150-08-454\u003c\/p\u003e\n\n\u003cp\u003eLength: 502 mm (19.76”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 437 mm (17.20”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 234 mm (9.21”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: Not available, including ATL CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity: 45 liters (11.88 gallons)\u003cbr\u003e\nContainer Part Number: 150-SA-AA-061\u003c\/p\u003e\n\n\u003cp\u003e45 Liter \"Well Cell\" Part No: 150-08-554\u003c\/p\u003e\n\n\u003cp\u003eDiameter: Ø 553 mm (21.77”)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 227 mm (8.93”)\u003c\/p\u003e\n\n\u003cp\u003eWeight: 9.2 kg (20.28 lb), including ATL CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity: 45 liters (11.88 gallons)\u003cbr\u003e\nContainer Part Number: Not available\u003c\/p\u003e\n\n\u003cp\u003e60 Liter Saver Cell Part No: 150-08-604\u003cbr\u003e\nLength: 602 mm (23.70”)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 437 mm (17.20”)\u003c\/p\u003e\n\n\u003cp\u003eHeight 234 mm (9.21”)\u003c\/p\u003e\n\n\u003cp\u003eWeight N\/A, including ATL CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity 60 liters (15.85 gallons)\u003cbr\u003e\nContainer Part No: 150-SA-AA-071\u003c\/p\u003e\n\n\u003cp\u003e80 Liter Saver Cell Part No: 150-08-804\u003c\/p\u003e\n\n\u003cp\u003eLength 845 mm (33.27”)\u003c\/p\u003e\n\n\u003cp\u003eDepth 435 mm (17.13”)\u003c\/p\u003e\n\n\u003cp\u003eHeight 235 mm (9.25”)\u003c\/p\u003e\n\n\u003cp\u003eWeight N\/A, including ATL CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel capacity 80 liters (21.13 gallons)\u003cbr\u003e\nContainer Part No: 150-SA-AA-101\u003c\/p\u003e\n\n\u003cp\u003eNo modifications required before installation\u003c\/p\u003e\n\n\u003cp\u003eThe new high-profile version of the Nuke Performance CFC unit requires no modifications to the fuel cell before installation.\u003c\/p\u003e\n\n\u003cp\u003eTechnical Information:\u003c\/p\u003e\n\n\u003cp\u003e• Optional lightweight aluminum container.\u003c\/p\u003e\n\n\u003cp\u003e• Delivered without top plate, ready for CFC unit.\u003c\/p\u003e\n\n\u003cp\u003e• 24-bolt 6x10\" filler plate.\u003c\/p\u003e\n\n\u003cp\u003e• Delivered with Nuke Performance CFC unit.\u003c\/p\u003e\n\n\u003cp\u003e• FIA\/FT3-1999 approved.\u003c\/p\u003e\n\n\u003cp\u003e• E85 compatible, but must be emptied before storage.\u003c\/p\u003e\n\n\u003cp\u003e• Modifications are required before CFC unit installation.\u003c\/p\u003e\n\n\u003cp\u003e• Fuel pump not included.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents:\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance CFC unit\u003c\/p\u003e\n\n\u003cp\u003e1 x ATL Saver Cell Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003eFIA Certification:\u003c\/p\u003e\n\n\u003cp\u003eFIA-certified fuel tanks have a 5-year lifespan and can be re-certified for an additional 2 years, up to a maximum of 7 years from the date of manufacture. Fuel tanks must be sent to ATL for re-certification.\u003c\/p\u003e\n\n\u003cp\u003eTo comply with FIA regulations, Saver Cells must be installed inside an aluminum container. Please refer to the container dimensions, not the tank dimensions, when checking for chassis fit.\u003cbr\u003e\nIt is not recommended for customers to manufacture their own aluminum containers without consulting ATL, as any sizing issue could invalidate the warranty.\u003c\/p\u003e\n\n\u003cp\u003eTank Modification before Installation:\u003c\/p\u003e\n\n\u003cp\u003eWith the new high-profile version of the Nuke Performance CFC unit, no modifications to the fuel cell are required before installation. If you have one of the low-profile versions of the CFC unit and wish to install it in your own ATL fuel cell, please contact us and we will provide instructions for the necessary modifications.\u003c\/p\u003e\n\n\u003cp\u003eMeasurements:\u003c\/p\u003e\n\n\u003cp\u003e30-liter fuel cell:\u003c\/p\u003e\n\n\u003cp\u003eCell: Length: 505 mm \/ Width: 305 mm \/ Height: 223 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: Length: 534 mm \/ Width: 326 mm \/ Height: 240 mm\u003c\/p\u003e\n\n\u003cp\u003e40-liter fuel cell:\u003c\/p\u003e\n\n\u003cp\u003eCell: Length: 602 mm \/ Width: 314 mm \/ Height: 254 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: Length: 638 mm \/ Width: 337 mm \/ Height: 270 mm\u003c\/p\u003e\n\n\u003cp\u003e45-liter fuel cell:\u003c\/p\u003e\n\n\u003cp\u003eCell: Length: 502 mm \/ Width: 437 mm \/ Height: 234 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: Length: 531 mm \/ Width: 464 mm \/ Height: 250 mm\u003c\/p\u003e\n\n\u003cp\u003e45-liter \"Well Cell\" fuel cell:\u003c\/p\u003e\n\n\u003cp\u003eCell: Width: 553 mm Length: 602 mm \/ Width: 437 mm \/ Height: 227 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: No container available for this version.\u003c\/p\u003e\n\n\u003cp\u003e60-liter fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eFuel tank: Length: 602 mm \/ Width: 437 mm \/ Height: 234 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: Length: 633 mm \/ Width: 461 mm \/ Height: 250 mm\u003c\/p\u003e\n\n\u003cp\u003e80-liter fuel tank:\u003c\/p\u003e\n\n\u003cp\u003eFuel tank: Length: 845 mm \/ Width: 435 mm \/ Height: 235 mm\u003c\/p\u003e\n\n\u003cp\u003eContainer: Length: 881 mm \/ Width: 459 mm \/ Height: 250 mm\u003c\/p\u003e\n\n\u003cp\u003eFuel Pumps:\u003c\/p\u003e\n\n\u003cp\u003ePlease note that this tank and CFC unit kit does not include fuel pumps. You can choose from a selection of fuel pumps when placing your order. Visit each fuel pump's page for more information on flow rate and estimated power. If you have further questions about choosing fuel pumps for your setup, please contact us before placing your order.\u003cbr\u003e\nRecommended single lift pump:\u003c\/p\u003e\n\n\u003cp\u003e1 x Ti Automotive \/ Walbro GST450\u003c\/p\u003e\n\n\u003cp\u003e1 x Ti Automotive \/ Walbro GST520\u003c\/p\u003e\n\n\u003cp\u003e1 x Deatschwerks DW300\u003c\/p\u003e\n\n\u003cp\u003e1 x Deatschwerks DW400\u003c\/p\u003e\n\n\u003cp\u003eRecommended single or dual high-pressure pump (inside surge tank):\u003c\/p\u003e\n\n\u003cp\u003e1-2 x Ti Automotive \/ Walbro GST450\u003c\/p\u003e\n\n\u003cp\u003e1-2 x Ti Automotive \/ Walbro GST520\u003c\/p\u003e\n\n\u003cp\u003e1-2 x Deatschwerks DW300\u003c\/p\u003e\n\n\u003cp\u003e1-2 x Deatschwerks DW400\u003c\/p\u003e","brand":"ATL","offers":[{"title":"Default Title","offer_id":56688095822164,"sku":"NP-150-08-554","price":2323.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/atl-saver-cell-wellcell-45-liter-with-the-nuke-performance-cfc-unit_4.jpg?v=1788963980"},{"product_id":"deposito-de-compensacion-de-pila-de-combustible-deatschwerks-de-20-l-con-4-bombas-de-combustible-dw200","title":"DeatschWerks 2.0L Fuel Cell Surge Tank with 4 DW200 Fuel Pumps","description":"\u003cp\u003e2.0 L Staged Fuel Cell Surge Tank with 4 DW200 Fuel Pumps, Universal\u003c\/p\u003e","brand":"DeatschWerks","offers":[{"title":"Default Title","offer_id":56688103031124,"sku":"USA-DW-6-201-20FST","price":1311.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/6-201-20FST.jpg?v=1788963952"},{"product_id":"deposito-de-combustible-de-50-l-fmic-eu-con-sensor-de-nivel-de-combustible","title":"50 L Fuel Tank FMIC.EU with Fuel Level Sender","description":"\u003cp\u003eFMIC.EU 50L Fuel Tank with Level Sensor\u003c\/p\u003e\n\n\u003cp\u003eThe FMIC.EU 50-liter fuel tank is a high-quality, lightweight, and durable construction designed for motorsport, track use, and vehicle preparation. Made entirely of aluminum, it weighs only 6.65 kg. Its structure, fully TIG-welded, is designed for competition, ensuring excellent tightness, durability, and resistance to vibrations and pressure.\u003c\/p\u003e\n\n\u003cp\u003eThe tank features three AN8 ports, allowing for flexible fuel system configuration, pump installation, return lines, and ventilation. A high-quality aluminum filler cap ensures a precise and leak-free seal, even with intensive use.\u003c\/p\u003e\n\n\u003cp\u003eThanks to its low weight and solid construction, this tank is particularly recommended for drift, autocross, 400-meter races, as well as high-performance and street vehicles. For track use with high lateral G-forces, it is recommended to use the tank in conjunction with a surge tank to ensure a constant fuel supply.\u003cbr\u003e\n- Lightweight construction: only 6.65 kg - Integrated fuel level sensor - Fully TIG-welded aluminum body - Three AN8 ports - Aluminum filler cap: durable and precise - High resistance to heat, pressure, and competition conditions - Ideal for drift, autocross, drag racing, and street cars - Compatible with surge tanks\u003c\/p\u003e\n\n\u003cp\u003eTechnical specifications:\u003c\/p\u003e\n\n\u003cp\u003e- Dimensions: 70 x 30.5 x 23 cm - Capacity: 50 liters - Material: aluminum - Weight: 6.65 kg - Number of ports: 3 - Port thread: AN8 - Aluminum filler cap - Precision TIG welds - Competition-ready construction\u003c\/p\u003e","brand":"FMIC EU","offers":[{"title":"Default Title","offer_id":56688106209620,"sku":"TNKFMIC-FC-60","price":255.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/FC-60_DSC_8217.jpg?v=1788963962"},{"product_id":"anillo-de-tuerca-de-aluminio-para-tapon-de-llenado-remoto-con-tornillos-m6-nuke-performance","title":"Nuke Performance M6 Screws Aluminum Remote Filler Cap Nut Ring","description":"\u003cp\u003eInstalling the Nuke Performance Remote Quick Lock Fill Cap into a body panel or Lexan window is easy with this aluminum nut ring for a secure and solid installation. Easily install the Nuke Performance Remote Quick Lock Fill Cap into a body panel or Lexan window with this high-quality anodized aluminum nut ring.\u003c\/p\u003e\n\n\u003cp\u003eAnodized aluminum nut ring. Designed for the Remote Quick Lock Fill Cap. M6 thread and 5 stainless steel screws included.\u003c\/p\u003e\n\n\u003cp\u003eThis optional ring ensures a safe and solid installation of the fill cap. It comes with 5 M6 screws for quick and easy installation, making it the perfect complement to your Nuke Performance Remote Quick Lock Fill Cap. Upgrade your vehicle's fuel system with this easy and secure installation option today!\u003c\/p\u003e\n\n\u003cp\u003eWe also offer a steel bracket for the Remote Quick Lock Fill Cap. You can weld or bolt the bracket to the chassis or bodywork. Installed in an easily accessible location, refilling your CFC-equipped fuel cell is quick and straightforward, without having to rummage around in the trunk of your vehicle. Steel mounting bracket. Part No: 150-30-113\u003c\/p\u003e\n\n\u003cp\u003eSpecifications of the aluminum nut ring:\u003c\/p\u003e\n\n\u003cp\u003eMaterial:\u003cbr\u003e\nAluminum\u003c\/p\u003e\n\n\u003cp\u003eSurface treatment:\u003cbr\u003e\nAnodized\u003c\/p\u003e\n\n\u003cp\u003eThreads:\u003cbr\u003e\nM6 (screws included)\u003c\/p\u003e\n\n\u003cp\u003eBolt pattern:\u003c\/p\u003e\n\n\u003cp\u003ePCD 5x60 mm (2.36\") \/ BCD 96 mm (3.77\")\u003c\/p\u003e\n\n\u003cp\u003eHeight:\u003cbr\u003e\n103.5 mm (4.07\")\u003c\/p\u003e\n\n\u003cp\u003eWidth:\u003cbr\u003e\n101.5 mm (4.00\")\u003c\/p\u003e\n\n\u003cp\u003eThickness:\u003cbr\u003e\n5.0 mm (0.20\")\u003c\/p\u003e\n\n\u003cp\u003eWeight:\u003cbr\u003e\n21 g (0.05 lb)\u003c\/p\u003e\n\n\u003cp\u003ePart No.:\u003cbr\u003e\n150-30-112\u003c\/p\u003e\n\n\u003cp\u003eEAN:\u003cbr\u003e\n7340209505443\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance steel mounting bracket includes: 1 aluminum nut ring with M6 thread K6S M6x12 stainless steel bolts\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688107159892,"sku":"NP-150-30-112","price":27.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/2693-82-150-30-112_01.jpg?v=1788963810"},{"product_id":"inserciones-de-aluminio-mecanizado-para-el-subchasis-trasero-racingline-vwr502000-para-audi-seat-skoda-vw-mqb-evo-2-5-tfsi-rs","title":"RacingLine VWR502000 Machined Billet Subframe Mount Inserts for Audi Seat Skoda VW MQB Evo 2.5 TFSI RS","description":"\u003cp\u003eRear Subframe Inserts. MQB\/MQB 'Evo' AWD Models.\u003c\/p\u003e\n\n\u003cp\u003eA simple yet effective upgrade for all hard-driven VW, Audi, Cupra and Skoda MQB\/MQB ‘Evo’ vehicles.\u003c\/p\u003e\n\n\u003cp\u003eThe Rear Subframe Inserts fill the large voids in the original rear subframe mounts with four machined inserts, limiting movement for much better response from the rear suspension and differential, ensuring sharper cornering dynamics.\u003c\/p\u003e\n\n\u003cp\u003eWhat do they do?\u003c\/p\u003e\n\n\u003cp\u003eThe RacingLine Rear Subframe Insert kit for the MQB and MQB ‘Evo’ chassis fills the voids in the original rear subframe mounts to limit the movement of the subframe and differential under load, thereby maintaining correct rear suspension geometry during hard cornering.\u003c\/p\u003e\n\n\u003cp\u003eBy filling the voids in the original mounts, this insert kit removes the inevitable play, ensuring a more precise and connected driving experience, especially during hard cornering.\u003c\/p\u003e\n\n\u003cp\u003eMQB\/MQBE chassis use soft rubber rear subframe mounts that deform significantly under load, leading to an unstable and loose feeling at the rear, and sub-optimal suspension geometry.\u003c\/p\u003e\n\n\u003cp\u003eThese precision-machined aluminium inserts slot into the voids to limit movement of the rear subframe without sacrificing ride comfort or introducing any perceptible noise, vibration or harshness into the cabin. All enthusiastic drivers love to feel a greater connection with their car.\u003c\/p\u003e\n\n\u003cp\u003eThe benefits of the subframe insert kit are even more noticeable on older cars with worn rubber mounts.\u003c\/p\u003e\n\n\u003cp\u003eDriving Transformation\u003c\/p\u003e\n\n\u003cp\u003eTransform your driving experience at the limit by minimising rear subframe movement under load, for a much more direct and connected feel when you need it.\u003c\/p\u003e\n\n\u003cp\u003eGuaranteed Durability\u003c\/p\u003e\n\n\u003cp\u003eUnlike polyurethane inserts on the market, these machined aluminium parts will not deform or wear over time, ensuring lasting performance.\u003cbr\u003e\nIncreased Strength\u003c\/p\u003e\n\n\u003cp\u003eMachined from solid blocks of T6-6061 aluminium, the race-proven subframe inserts are more than strong enough to hold the rear geometry in its exact position, even on track.\u003c\/p\u003e\n\n\u003cp\u003eConfirmed Applications.\u003c\/p\u003e\n\n\u003cp\u003eMQB and MQB 'evo' AWD\u003c\/p\u003e\n\n\u003cp\u003eVW Golf 8 \u0026amp; 8.5 2020+\u003cbr\u003e\nVW Golf 7 \u0026amp; 7.5 2013-2020\u003cbr\u003e\nVW Passat B8 2015+\u003cbr\u003e\nVW Arteon 2017+\u003cbr\u003e\nVW T-Roc 2017+\u003cbr\u003e\nVW Tiguan II 2016+\u003cbr\u003e\nVW Jetta \/ GLI 7 2018+\u003cbr\u003e\nAudi S3 8Y \u0026amp; 8Y.2 2020+\u003cbr\u003e\nAudi A3 8Y \u0026amp; 8Y.2 2020+\u003c\/p\u003e\n\n\u003cp\u003eAudi S3 8V 2013-2020\u003c\/p\u003e\n\n\u003cp\u003eAudi A3 8V 2013-2020\u003c\/p\u003e\n\n\u003cp\u003eAudi RS3 2.5 TFSI 8Y \u0026amp; 8Y.2 2021+\u003c\/p\u003e\n\n\u003cp\u003eAudi RS3 2.5 TFSI 8V.2 evo 2017-2020\u003c\/p\u003e\n\n\u003cp\u003eAudi RS3 2.5 TFSI 8V 2015-2017\u003c\/p\u003e\n\n\u003cp\u003eAudi TT 3 8S 2014+\u003c\/p\u003e\n\n\u003cp\u003eAudi TTRS 2.5 TFSI 8S 2017+\u003c\/p\u003e\n\n\u003cp\u003eAudi SQ2 2018+\u003c\/p\u003e\n\n\u003cp\u003eAudi RSQ3 F3 2019+\u003c\/p\u003e\n\n\u003cp\u003eCupra Leon 4 \u0026amp; 4.5 FW 2020+\u003cbr\u003e\nSEAT Leon III Cupra 5F 2014-2020\u003cbr\u003e\nCupra Formentor VZ5 2.5 TFSI 2020+\u003cbr\u003e\nCupra Formentor 2020+\u003cbr\u003e\nCupra Ateca 2018+\u003cbr\u003e\nSkoda Octavia IV NX 2020+\u003cbr\u003e\nSkoda Octavia III 5E 2014-2020\u003cbr\u003e\nSkoda Superb III 3V 2015+\u003cbr\u003e\nSkoda Kodiaq RS 2018+\u003c\/p\u003e","brand":"RacingLine","offers":[{"title":"Default Title","offer_id":56688107225428,"sku":"VWR502000","price":175.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/VWR502000.jpg?v=1788963865"},{"product_id":"recipiente-de-repuesto-para-pila-de-combustible-de-14-galones-de-radium-engineering","title":"Radium Engineering 14-Gallon Fuel Cell Surge Tank","description":"\u003cp\u003eThis is a replacement aluminum housing that protects the internal fuel bladder. Compatible with Radium RA-series fuel cells.\u003c\/p\u003e\n\n\u003cp\u003eEach replacement fuel cell housing includes: black powder-coated aluminum lid, black powder-coated aluminum base, Radium Engineering decal stickers, and stainless steel hardware.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688108306772,"sku":"USA-RAD-20-0674","price":553.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0670n_2.jpg?v=1788963966"},{"product_id":"conector-hembra-de-montaje-directo-con-ventilacion-de-15-pulgadas-con-rotura-en-seco-radium-engineering","title":"Radium Engineering 1.5-inch Dry Break Vented Direct Mount Female Connector","description":"\u003cp\u003eDesigned for direct mounting on a fuel cell. For coupling, a 6-bolt flange with a 2.18\" PCD bolt circle (such as the FCST) is required. Includes the 1.5\", female, vented 20-0549-V Dry Break connector, as well as an aluminum housing, stainless steel hardware, and a gasket. Components, materials, and gaskets are compatible with all fuel types (unleaded and leaded gasoline, diesel, aviation fuel, methanol, ethanol, E15, E85, etc.).\u003c\/p\u003e\n\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\n\u003cp\u003eHeight: 3.43\" (from Dry Break connector to gasket)\u003cbr\u003e\nCoupling: 1.5\", male 20-0496 Dry Break\u003c\/p\u003e\n\n\u003cp\u003eInstruction PDF\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688110338388,"sku":"USA-RAD-20-0495-V","price":221.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/dry-break-1-5in-female-direct-mount-vented-radium-engineering.jpg?v=1788963863"},{"product_id":"kit-de-manguera-de-llenado-de-combustible-de-90-cm-nuke-performance","title":"Nuke Performance 90cm Fuel Filler Hose Kit","description":"\u003cp\u003eThe Nuke Performance fuel filler hose kit is the perfect solution for all your refueling needs. Its antistatic corrugated design allows for maximum flexibility. Thanks to its lightweight construction, an 80% weight saving is achieved compared to commonly used 50mm (2\") filler hoses in the aftermarket, meaning you won't add unnecessary weight to your vehicle, making it ideal for motorsport applications.\u003c\/p\u003e\n\n\u003cp\u003eExtremely flexible thanks to its corrugated design. Suitable for all types of fuels, including alcoholic fuels. Very lightweight, with up to 80% weight savings. Antistatic nylon hose and Viton bushings. 50mm (2\") internal diameter. Installs directly to the CFC unit and remote filler cap.\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance fuel filler hose is also very durable and capable of handling all types of fuels, including E85 and other alcoholic fuels, even for extended periods of time. It is perfect for use with aftermarket fuel cells such as ATL, Pyrotect, AluCell, Fuel Safe, and others, and can be easily connected to a remote fill neck or an original filler cap. Whether you're using it in motorsport or simply need a reliable and flexible fuel transfer hose for your vehicle, this hose is the ideal solution.\u003c\/p\u003e\n\n\u003cp\u003eExperience ultimate convenience when fueling with our flexible and lightweight fuel filler hose kit. The Nuke Performance 90cm (3ft) fuel filler hose kit is designed with convenience in mind. Its corrugated design allows for easy bending and movement, making it incredibly easy to handle. Our fuel hose is easy to use and significantly lighter than other options, weighing almost 80% less than other common hoses on the market. Whether you're a professional mechanic or a DIY enthusiast, the Nuke Performance fuel filler hose is perfect for you. Easily install the fuel filler hose for your motorsport setup with the combination of the Nuke Performance CFC unit, the remote quick lock filler cap, and this fuel filler hose kit.\u003cbr\u003e\nRemote fuel filler hose 50mm (2\") internal diameter, ideal for all Nuke Performance CFC units. The Nuke Performance CFC unit has a low-profile filler cap, easy for some to use, but most prefer a remote filler solution. The 90cm (3ft) fuel filler hose kit is designed for use with the CFC unit and attaches directly to the additional remote filler neck.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Nuke Performance CFC units\/fuel cells with a 50mm (2\") internal diameter for universal installations.\u003c\/p\u003e\n\n\u003cp\u003eThis fuel hose is designed with the same functionality as all other Nuke Performance parts, is safe for all types of fuels, such as petrol and ethanol, and is the lightest solution on the market, allowing for a functional installation with crucial weight savings.\u003c\/p\u003e\n\n\u003cp\u003eSafe for all types of fuels, including alcoholic fuels such as ethanol. It will maintain its durability and flexibility even with prolonged use. The Nuke Performance 50mm (2\") 90cm (3ft) fuel filler hose kit is safe for all types of fuels, including alcoholic fuels such as ethanol. It remains flexible and durable even with prolonged use, even when used with alcoholic fuels, which adversely affects other commonly used hoses on the market.\u003c\/p\u003e\n\n\u003cp\u003eAntistatic Nylon for safe fuel filling. Suitable for all types of fuels, including alcoholic fuels.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eThe Nuke Performance fuel filler hose is made from the same antistatic nylon as our corrugated hoses used in our in-tank fuel pump mounting kits. The antistatic nylon material helps dissipate static electricity as fuel flows through the hose.\u003c\/p\u003e\n\n\u003cp\u003eDelivered with Viton bushings and stainless steel clamps for a clean, safe, and easy installation. The hose is delivered as a kit including bushings and steel clamps, and thanks to its corrugated design, it is the lightest solution available on the market. It comes with Viton (safe for alcoholic fuels) bushings and stainless steel hose clamps for easy installation, and can be cut to length if needed (see product manual). To connect the hose to Nuke Performance CFC units, you need to use the additional remote filler neck, and for your remote filler cap need, it fits directly to the Nuke Performance remote quick lock filler cap. Remote mount filler neck Part No: 150-05-202 Remote quick lock filler cap Part No: 150-30-201\u003c\/p\u003e\n\n\u003cp\u003eCombine with the Nuke Performance remote quick lock filler cap for a hassle-free, easily accessible fuel filling installation. Simplify your fuel cell's refueling process with the Nuke Performance remote quick lock filler cap (available here), the perfect match for the flexible and lightweight fuel filler hose. The Nuke Performance filler cap features a lightweight design and a quick lock mechanism. With just a 90-degree twist, you can lock and unlock the cap with ease. Remote quick lock filler cap Part No: 150-30-201\u003c\/p\u003e\n\n\u003cp\u003eDesigned and developed in Sweden, ensuring maximum finish, functionality, and quality. Developed and designed in-house by Nuke Performance in Sweden. The 90cm (3ft) fuel filler hose kit is of the highest quality and bears the same hallmark as all other Nuke Performance lightweight motorsport products. Nuke Performance parts are developed in collaboration with motorsport teams worldwide, ensuring that both functionality and design meet the highest standards, and even set their own standards.\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance quality is second to none.\u003c\/p\u003e\n\n\u003cp\u003e90cm (3ft) Fuel Filler Hose Kit Specifications: For more information about specifications, please see the product manual.\u003c\/p\u003e\n\n\u003cp\u003eHose inner diameter:\u003c\/p\u003e\n\n\u003cp\u003e54.0 mm (2.13\")\u003c\/p\u003e\n\n\u003cp\u003eBush inner diameter:\u003c\/p\u003e\n\n\u003cp\u003e50.0 mm (2.0\")\u003c\/p\u003e\n\n\u003cp\u003eCollar length:\u003c\/p\u003e\n\n\u003cp\u003e29.0 mm (1.14\")\u003c\/p\u003e\n\n\u003cp\u003eBush length:\u003c\/p\u003e\n\n\u003cp\u003e22.8 mm (0.89\")\u003c\/p\u003e\n\n\u003cp\u003eHose total length\u003c\/p\u003e\n\n\u003cp\u003e915.5 mm (3 ft)\u003c\/p\u003e\n\n\u003cp\u003eWeight (without accessories)\u003c\/p\u003e\n\n\u003cp\u003e213 g (0.47 lb)\u003c\/p\u003e\n\n\u003cp\u003eWeight (with accessories)\u003c\/p\u003e\n\n\u003cp\u003e289 g (0.64 lb)\u003c\/p\u003e\n\n\u003cp\u003eHose material\u003cbr\u003e\nNylon (antistatic)\u003c\/p\u003e\n\n\u003cp\u003eBushing material\u003cbr\u003e\nViton (2 included)\u003c\/p\u003e\n\n\u003cp\u003eFuel compatibility\u003cbr\u003e\nPetrol, Ethanol, Methanol, Race fuel, Diesel\u003c\/p\u003e\n\n\u003cp\u003eFor motorsport use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eCut to length\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003ePart No\u003c\/p\u003e\n\n\u003cp\u003e150-31-201\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209505887\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance Fuel Filler Hose Kit, 90cm (3ft) includes: 1x Corrugated Nylon Fuel Filler Hose (90cm \/ 3ft), 2x Viton Bushings with a 50mm (2\") internal diameter, 2x Stainless Steel Hose Clamps, 1x POM Clamp Insert (used if hose is cut to length)\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688111681876,"sku":"NP-150-31-201","price":163.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/2707-82-150-31-201_01.jpg?v=1788963828"},{"product_id":"anillo-de-tuerca-para-celda-de-combustible-anodizado-negro-radium-engineering","title":"Radium Engineering Black Anodized Fuel Cell Nut Ring","description":"\u003cp\u003eFuel Cell Nut Ring, Black Anodized\u003c\/p\u003e\n\n\u003cp\u003eManufacturer: Radium Engineering\u003c\/p\u003e\n\n\u003cp\u003e14-0584 This nut ring is made from 6061 aluminum and anodized to allow for use with all fuel types and prevent corrosion. All threaded holes are 1\/4\"-28 thread, following the industry standard 6x10 pattern. It is designed to bolt onto Radium RA series fuel cells, but is compatible with others as well. Gasket not included.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688111878484,"sku":"USA-RAD-14-0584","price":68.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/14-0584.jpg?v=1788964001"},{"product_id":"kit-de-conversion-de-deposito-de-combustible-tipo-sillin-radium-engineering","title":"Radium Engineering Saddle Fuel Tank Conversion Kit","description":"\u003cp\u003eThis innovative fuel transfer system allows the use of two fuel cells for racing vehicles, optimizing fuel capacity and weight distribution. The cells can be mounted strategically for optimal weight distribution and a low center of gravity.\u003c\/p\u003e\n\n\u003cp\u003eREQUIRED COMPONENTS\u003c\/p\u003e\n\n\u003cp\u003eTwo Radium Engineering Fuel Cells. Different capacity fuel cells can be used. However, the top flanges of each fuel cell must be mounted at the same height.\u003c\/p\u003e\n\n\u003cp\u003eOne Radium Engineering FCST-X Surge Tank. Previous FCST (non-X version) surge tanks are not compatible as they do not have the required lift pump access (FCST-X handle).\u003c\/p\u003e\n\n\u003cp\u003eAt least 3 fuel pumps are required (2 lift pumps and 1-3 surge tank pumps). When purchasing lift pumps, make sure they have integrated check valves on the outlets. Pumps without check valves can cause backflow and malfunction.\u003c\/p\u003e\n\n\u003cp\u003eRemote fill and vent kit or remote mount refueling kit. Since it includes 1.5” ID tubing, any remote mount fuel filler neck with a 1.5” OD connection is compatible. The system is compatible with standard and dry break refueling systems.\u003c\/p\u003e\n\n\u003cp\u003eRECOMMENDED\u003c\/p\u003e\n\n\u003cp\u003eOne or two Radium Engineering Fuel Level Sensors. If only one sensor is installed, it is recommended to install it in the active fuel cell. However, two sensors are suggested. NOTE: When two Radium Engineering 0-90 Ohm fuel level sensors are wired in series, a new range of 0 (empty) to 180 (full) ohms is created. If connected to separate inputs of a programmable ECU, the passive side level sensor can also be used to control the passive side lift pump activation\/deactivation. This will prevent the pump from running when the passive side cell is empty.\u003c\/p\u003e\n\n\u003cp\u003eRadium Engineering Fuel Level Switch 20-0461. This component installs into the 1\/8” NPT port located on the bottom plate of the fuel surge tank. This can trigger a relay or provide an input to the ECU to control the active side lift pump. When the fuel level float is in the high position (fuel surge tank = full), the active side lift pump can be turned off.\u003c\/p\u003e\n\n\u003cp\u003eNOTES\u003c\/p\u003e\n\n\u003cp\u003eThe FCST-X rollover valve is removed, and the vent port becomes the overflow for air and fuel to return to the passive side. The rollover valve vent fitting is relocated from the FCST-X to the new fuel cell vent port on the passive side.\u003c\/p\u003e\n\n\u003cp\u003eDue to the new location of the vent fitting, it is mandatory for the active fuel cell to fill just before the passive fuel cell. Depending on the orientation of the 1.5” OD stainless steel tee for the fuel filler tubing, the refueling hoses can be routed in two ways. This will depend on the location of the vehicle's fill hole.\u003c\/p\u003e\n\n\u003cp\u003eThe tee can be oriented vertically or horizontally to change which fuel cell fills first. Observe how the fuel filler cap (fender mounted) shifts to the opposite side of the system depending on the tee connection orientation. This is based on the path of least resistance (fluid dynamics).\u003c\/p\u003e\n\n\u003cp\u003eThe kit allows units to be mounted in the vehicle both transversely and longitudinally. Fittings and hoses for both configurations are included.\u003c\/p\u003e\n\n\u003cp\u003eCustom logic will be required to control the passive cell lift pump. This will need to use a resistance signal from the level sensor to know when the passive cell is empty, so that the passive side lift pump can be turned off at that time.\u003c\/p\u003e\n\n\u003cp\u003eThe active fuel cell lift pump can be controlled by the fuel level diagnostic switch. It will activate whenever the surge tank level drops.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688112238932,"sku":"USA-RAD-20-0664","price":749.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/USA-RAD-20-0664.png?v=1788963952"},{"product_id":"tapon-de-llenado-de-la-unidad-cfc-de-repuesto-nuke-performance","title":"Nuke Performance CFC Unit Filler Cap Replacement","description":"\u003cp\u003eReplacement filler cap for Nuke Performance CFC Units.\u003c\/p\u003e\n\n\u003cp\u003eReplacement filler cap for Nuke Performance CFC Unit, includes Viton o-ring (suitable for alcoholic fuels).\u003c\/p\u003e\n\n\u003cp\u003eFits the following Nuke Performance products:\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance CFC Unit - Low Profile\u003cbr\u003e\nNuke Performance CFC Unit for ATL Fuel Cells\u003cbr\u003e\nNuke Performance CFC Unit for Brushless Fuel Pumps\u003c\/p\u003e\n\n\u003cp\u003eViton o-ring included.\u003c\/p\u003e\n\n\u003cp\u003eQuantity: 1pc\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688114762068,"sku":"NP-150-10-124","price":49.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NP-150-10-124.jpg?v=1788963902"},{"product_id":"bidon-de-llenado-rapido-de-5-galones-llenado-estandar-radium-engineering","title":"5 Gallon Fast Fill Jug, Standard Fill, Radium Engineering","description":"\u003cp\u003eThis fuel jug kit features all the aforementioned characteristics and is configured for standard (non-dry break) fueling. It is ideal for all forms of motorsports.\u003c\/p\u003e\n\n\u003cp\u003eThe jug includes knurled aluminum pour and vent caps. The stainless steel spout's inner diameter is optimized, maintaining compatibility with all OEM fuel fill orifices.\u003c\/p\u003e\n\n\u003cp\u003eFor improved ergonomics, the anodized aluminum cap also features knurled machining.\u003c\/p\u003e\n\n\u003cp\u003eThe vent cap features 6 fuel type indicators: (unleaded, leaded, methanol, ethanol, pre-mix, diesel). The small knob can be screwed into the appropriate threaded hole to mark the fuel type.\u003c\/p\u003e\n\n\u003cp\u003eFor slow and controlled filling, the plastic flip cap (shown in image) can be easily opened. For slightly faster filling, the entire vent cap can be unscrewed (not recommended). Use with caution.\u003c\/p\u003e\n\n\u003cp\u003eFLOW RATES\u003c\/p\u003e\n\n\u003cp\u003eRADIUM Dump Can (standard fill) = 5.86 gpm (vent cap closed \/ flip cap open)\u003c\/p\u003e\n\n\u003cp\u003eRADIUM Dump Can (standard fill) = 6.70 gpm (vent cap removed)\u003c\/p\u003e\n\n\u003cp\u003eGeneric Fuel Jug X = 1.86 gpm (flip cap open)\u003c\/p\u003e\n\n\u003cp\u003eSPECIFICATIONS\u003c\/p\u003e\n\n\u003cp\u003eVolume: 5 Gallons (19 Liters)\u003c\/p\u003e\n\n\u003cp\u003eHeight: 25.25\" (641mm)\u003c\/p\u003e\n\n\u003cp\u003eWidth: 9.5\" (241mm)\u003c\/p\u003e\n\n\u003cp\u003eDepth: 9.5\" (241mm)\u003c\/p\u003e\n\n\u003cp\u003eVent OD: 1.675\" (43mm)\u003c\/p\u003e\n\n\u003cp\u003eVent ID: 1.375\" (35mm)\u003c\/p\u003e\n\n\u003cp\u003ePour Spout OD (if cut): 2.5\" or 3\"\u003c\/p\u003e\n\n\u003cp\u003eFlow Rate (standard fill): 5.86 gpm (max)\u003c\/p\u003e\n\n\u003cp\u003eFlow Rate (dry break): 25.75 gpm (max)\u003c\/p\u003e\n\n\u003cp\u003eColor: Translucent White\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688114827604,"sku":"USA-RAD-20-0697-00","price":221.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/quick-fill-dump-can-6gal-standard-filler-radium-engineering.jpg?v=1788963813"},{"product_id":"deposito-de-combustible-de-acero-inoxidable-inox-de-110-l-iod-performance-para-nissan-patrol-y60-y61","title":"110L IOD Performance Stainless Steel Fuel Tank for Nissan Patrol Y60 Y61","description":"\u003cp\u003e110 L Stainless Steel Fuel Tank for Nissan Patrol Y60\/Y61\u003c\/p\u003e\n\n\u003cp\u003eDuring off-road driving and long expeditions, increased fuel tank capacity is essential to reduce the need for frequent refueling. The 110 L fuel tank for Nissan Patrol Y60\/Y61 is the ideal solution for those seeking a reliable tank with a slightly larger capacity, while maintaining the same ground clearance as the factory tank.\u003cbr\u003e\nKey features of the 110 L fuel tank for Y60\/Y61:\u003c\/p\u003e\n\n\u003cp\u003eEquipped with internal baffle and necessary ventilation holes.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the original tank skid plate.\u003c\/p\u003e\n\n\u003cp\u003eIncludes gasket for the fuel level sender.\u003c\/p\u003e\n\n\u003cp\u003eMade of stainless steel.\u003c\/p\u003e\n\n\u003cp\u003eCapacity: 110 liters.\u003c\/p\u003e\n\n\u003cp\u003eFiller neck diameter: 42 mm.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with factory mounting points.\u003c\/p\u003e\n\n\u003cp\u003eCompatible with the original tank skid plate.\u003c\/p\u003e\n\n\u003cp\u003eTechnical specifications:\u003c\/p\u003e\n\n\u003cp\u003eMaterial: Stainless steel.\u003c\/p\u003e\n\n\u003cp\u003eCapacity: 110 liters.\u003c\/p\u003e\n\n\u003cp\u003eCompatibility: Nissan Patrol Y60\/Y61.\u003c\/p\u003e\n\n\u003cp\u003eInstallation: Fits factory mounting points with the original tank skid plate.\u003c\/p\u003e\n\n\u003cp\u003eFactory tanks used two filler neck diameters; this tank uses a 42 mm inlet.\u003c\/p\u003e\n\n\u003cp\u003eIf the vehicle originally had a 36 mm filler neck, the rubber hose must be replaced.\u003c\/p\u003e\n\n\u003cp\u003eIt is recommended to rinse the inside of the tank with extraction gasoline before installation.\u003c\/p\u003e\n\n\u003cp\u003eThe price includes a complete fuel tank ready for installation.\u003c\/p\u003e\n\n\u003cp\u003eAttention! Originally, the tank had two filler neck diameters. Our product has a 42 mm diameter. If you have an original tank with a 36 mm diameter (less common), you will need to replace the rubber hose.\u003c\/p\u003e","brand":"IOD Performance","offers":[{"title":"Default Title","offer_id":56688114958676,"sku":"IOD-59","price":553.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/IOD-59.png?v=1788963849"},{"product_id":"tapon-de-llenado-con-cierre-rapido-remoto-nuke-performance","title":"Nuke Performance Remote Quick-Release Filler Cap","description":"\u003cp\u003eNuke Performance Remote Quick Lock Filler Cap for 50mm (2\") fuel hoses, for all types of racing vehicles and aftermarket fuel tanks. With a lightweight design, quick-lock mechanism, and 5-bolt pattern, this cap is the ideal solution for easy and secure installation on your aftermarket fuel tank or Nuke Performance CFC units. With just a 90-degree twist, you can lock and unlock the cap with ease.\u003c\/p\u003e\n\n\u003cp\u003eQuick lock with 90-degree lock mechanism. Barbed fitting for 50mm (2\") fuel hoses. Universal fit for your race car. Viton O-rings and gaskets, safe for all types of fuel. Safety wire kit included.\u003c\/p\u003e\n\n\u003cp\u003eSimplify your CFC unit fuel filling process with the Nuke Performance Remote Quick Lock Filler Cap. Thanks to its 5-bolt pattern and user-friendly mounting hardware, installation is a breeze. This filler cap is compatible with standard gas station nozzles and fuel jug filler hoses and is safe to use with all types of fuels, including E85 and other alcoholic fuels. With its Viton gaskets and seals, you can trust that it will withstand even the most demanding conditions.\u003c\/p\u003e\n\n\u003cp\u003eWith a true quick-lock mechanism, only a 90-degree twist is needed to secure the cap. The Nuke Performance Remote Quick Lock Filler Cap is a piece of art, and we ensure you will love it. Opening and closing this aluminum masterpiece will amaze you. Thanks to its simple 90-degree twist quick-lock mechanism, you can easily unlock and lock the cap, making it perfect for motorsport applications where a remote filling solution is required. It features a barbed connection that fits a 50mm (2\") fuel filler hose, such as the Nuke Performance Fuel Filler Hose Kit.\u003c\/p\u003e\n\n\u003cp\u003eSafe for all types of fuel, including alcoholic fuels. Barbed connection fits 50mm (2\") fuel hose.\u003c\/p\u003e\n\n\u003cp\u003eThis filler cap is not only extremely practical, but it is also built to last. It is safe to use with all types of fuels, including ethanol and methanol, and its durable construction ensures optimal performance even in the most demanding conditions.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is a breeze thanks to the 5-bolt pattern design and available mounting hardware. Installation is made simple with the additional aluminum nut ring and steel holder. The remote filler cap solution makes refueling your aftermarket fuel tank easy, and it is specifically designed to be used with our CFC units. By installing it in an easily accessible location, refueling your CFC unit equipped fuel tank is quick and straightforward, without having to fumble around in your vehicle's trunk. Note that a 77mm (3.03\") hole needs to be fabricated if installing the cap into a body panel. Aluminum nut ring with M6 screws. Part No: 150-30-112. Steel mounting bracket with M6 screws. Part No: 150-30-113.\u003c\/p\u003e\n\n\u003cp\u003eRemote Quick Lock Filler Cap Specifications:\u003c\/p\u003e\n\n\u003cp\u003eBarbed connection\u003c\/p\u003e\n\n\u003cp\u003e50.0 mm (2.0\")\u003c\/p\u003e\n\n\u003cp\u003eBarbed length\u003c\/p\u003e\n\n\u003cp\u003e25 mm (0.98\")\u003c\/p\u003e\n\n\u003cp\u003eBolt pattern\u003c\/p\u003e\n\n\u003cp\u003ePCD 5x60 mm (2.36\") \/ BCD 96 mm (3.77\")\u003c\/p\u003e\n\n\u003cp\u003eBolt dimensions\u003c\/p\u003e\n\n\u003cp\u003eM6 (not included)\u003c\/p\u003e\n\n\u003cp\u003eGasket included\u003c\/p\u003e\n\n\u003cp\u003eYES, Viton gasket\u003c\/p\u003e\n\n\u003cp\u003eWire included\u003c\/p\u003e\n\n\u003cp\u003eYES, stainless wire with heat shrink\u003c\/p\u003e\n\n\u003cp\u003eOuter diameter\u003c\/p\u003e\n\n\u003cp\u003e110.5 mm (4.35\")\u003c\/p\u003e\n\n\u003cp\u003eHeight above panel\u003c\/p\u003e\n\n\u003cp\u003e12.0 mm (0.47\")\u003c\/p\u003e\n\n\u003cp\u003eOverall depth\u003c\/p\u003e\n\n\u003cp\u003e64.0 mm (2.51\")\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003e366 g (0.80 lb)\u003c\/p\u003e\n\n\u003cp\u003eFor motorsport use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eFuel compatibility\u003cbr\u003e\nPetrol, Ethanol, Methanol, Race Fuel, Diesel\u003c\/p\u003e\n\n\u003cp\u003ePart No.\u003c\/p\u003e\n\n\u003cp\u003e150-30-101\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209505436\u003c\/p\u003e\n\n\u003cp\u003eThe Nuke Performance Remote Quick Lock Filler Cap includes: 1 pc. Filler cap body with 50mm (2\") hose barb connection, 1 pc. Quick release spring-sealed filler cap, 1 pc. Safety wire kit for M6 application, 1 pc. Viton gasket, fuel type safe for all types of fuel.\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688121741652,"sku":"NP-150-30-101","price":324.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/2687-82-150-30-101_01.jpg?v=1788963918"},{"product_id":"sensor-de-nivel-de-combustible-nuke-performance-0-90-ohmios-15-381-mm","title":"Nuke Performance Fuel Level Sensor 0-90 Ohms - 15\" \/ 381 mm","description":"\u003cp\u003eISSPRO Fuel Level Sensor is compatible with Nuke Performance CFC Unit. 0-90 Ohm fuel level sensor available with or without fuel gauge, compatible with standard SAE 5-bolt mounting pattern. Compatible with Nuke Performance fuel cells:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08: 203mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 6.25 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 8 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 30 liter\u003cbr\u003e\nATL Saver Cell 45 liter\u003cbr\u003e\nWell Cell Saver Cell 45 liter\u003cbr\u003e\nATL Saver Cell 60 liter\u003cbr\u003e\nATL Saver Cell 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09: 228mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 10 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 12 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 15 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 18 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 22 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 40 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 20 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 40 liter\u003cbr\u003e\nWellcell Fuel Cell 45 liter AluCell Aluminum Fuel Tank 60 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-10: 254mm \/ 10\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12: 305mm \/ 12\"\u003cbr\u003e\nPyrotect 17 Gallon Fuel Tank\u003cbr\u003e\nAluCell Aluminum Fuel Tank 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-13: 330mm \/ 13\"\u003cbr\u003e\nPyrotect 24 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-15: 381mm \/ 15\"\u003cbr\u003e\nPyrotect 26 Gallon Fuel Tank\u003cbr\u003e\nPyrotect 32 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-16: 406mm \/ 16\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003eOhm resistance: 0 Ohm: Empty\u003cbr\u003e\n90 Ohm: Full\u003cbr\u003e\nOptional Specs: Also available in 240-33 Ohm\u003cbr\u003e\nFuel level sensors for motorsport and aftermarket fuel systems Compatible with the most common fuel cells including Pyrotect, ATL, Fuel Safe, Harmon, Premiere, Jaz and more, and is the perfect match for the Nuke Performance Competition Fuel Cell Unit. Can be ordered with or without a fuel level gauge.\u003c\/p\u003e\n\n\u003cp\u003eI have lost my adapter plate \/ spacer for the fuel level sensor unit, can I order a new one? My fuel level sensor unit does not fit the mounting point of the CFC unit, what should I do? An adapter plate \/ spacer is needed to mount a fuel level sensor with a larger diameter than the CFC unit's bore or using the common asymmetric 5-bolt pattern often found on aftermarket fuel level sensors. The spacer \/ adapter plate is included with all Nuke Performance CFC units upon purchase, if you lose it, you can order a replacement plate. A detailed mounting description can be found in the CFC unit's product manual here. Asymmetrical 5-bolt adapter plate. Part Number: 150-10-117\u003c\/p\u003e\n\n\u003cp\u003eApproved for all types of fuel, for all types of motorsports. Approved for gasoline. methanol, and ethanol. Available in various lengths, select size when placing your order. If you order together with a fuel cell, we make sure you get the correct one with your order.\u003c\/p\u003e\n\n\u003cp\u003eOrder fuel level gauge without fuel level sensor. If you need a fuel level gauge and already bought the sensor, you can acquire the gauge as an accessory if you need it. Fuel Gauge: Resistance (0-90 Ohm). Part Number: 150-FLG-01\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688123773268,"sku":"NP-150-FLS-15-01","price":229.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NukePerformanceFLS-0-90_5_bcdf9bac-48d3-430e-82ea-844dfe6242f3.jpg?v=1788963921"},{"product_id":"sensor-de-nivel-de-combustible-nuke-performance-0-90-ohmios-10-254-mm","title":"Nuke Performance 0-90 Ohm Fuel Level Sensor - 10\" \/ 254 mm","description":"\u003cp\u003eISSPRO Fuel Level Sensor is compatible with Nuke Performance CFC Unit. 0-90 Ohm fuel level sensor available with or without fuel gauge, compatible with standard SAE 5-bolt mounting pattern. Compatible with Nuke Performance fuel cells:\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-08: 203mm \/ 8\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 6.25 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 8 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 30 liter\u003cbr\u003e\nATL Saver Cell 45 liter\u003cbr\u003e\nWell Cell Saver Cell 45 liter\u003cbr\u003e\nATL Saver Cell 60 liter\u003cbr\u003e\nATL Saver Cell 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-09: 228mm \/ 9\"\u003c\/p\u003e\n\n\u003cp\u003ePyrotect 10 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 12 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 15 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 18 Gallon Fuel Cell\u003cbr\u003e\nPyrotect 22 Gallon Fuel Cell\u003cbr\u003e\nATL Saver Cell 40 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 20 liter\u003cbr\u003e\nAluCell Aluminum Fuel Cell 40 liter\u003cbr\u003e\nWellcell Fuel Cell 45 liter AluCell Aluminum Fuel Tank 60 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-10: 254mm \/ 10\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-12: 305mm \/ 12\"\u003cbr\u003e\nPyrotect 17 Gallon Fuel Tank\u003cbr\u003e\nAluCell Aluminum Fuel Tank 80 liter\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-13: 330mm \/ 13\"\u003cbr\u003e\nPyrotect 24 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-15: 381mm \/ 15\"\u003cbr\u003e\nPyrotect 26 Gallon Fuel Tank\u003cbr\u003e\nPyrotect 32 Gallon Fuel Tank\u003c\/p\u003e\n\n\u003cp\u003e150-FLS-16: 406mm \/ 16\"\u003c\/p\u003e\n\n\u003cp\u003eNot Available\u003c\/p\u003e\n\n\u003cp\u003eOhm resistance: 0 Ohm: Empty\u003cbr\u003e\n90 Ohm: Full\u003cbr\u003e\nOptional Specs: Also available in 240-33 Ohm\u003cbr\u003e\nFuel level sensors for motorsport and aftermarket fuel systems Compatible with the most common fuel cells including Pyrotect, ATL, Fuel Safe, Harmon, Premiere, Jaz and more, and is the perfect match for the Nuke Performance Competition Fuel Cell Unit. Can be ordered with or without a fuel level gauge.\u003c\/p\u003e\n\n\u003cp\u003eI have lost my adapter plate \/ spacer for the fuel level sensor unit, can I order a new one? My fuel level sensor unit does not fit the mounting point of the CFC unit, what should I do? An adapter plate \/ spacer is needed to mount a fuel level sensor with a larger diameter than the CFC unit's bore or using the common asymmetric 5-bolt pattern often found on aftermarket fuel level sensors. The spacer \/ adapter plate is included with all Nuke Performance CFC units upon purchase, if you lose it, you can order a replacement plate. A detailed mounting description can be found in the CFC unit's product manual here. Asymmetrical 5-bolt adapter plate. Part Number: 150-10-117\u003c\/p\u003e\n\n\u003cp\u003eApproved for all types of fuel, for all types of motorsports. Approved for gasoline. methanol, and ethanol. Available in various lengths, select size when placing your order. If you order together with a fuel cell, we make sure you get the correct one with your order.\u003c\/p\u003e\n\n\u003cp\u003eOrder fuel level gauge without fuel level sensor. If you need a fuel level gauge and already bought the sensor, you can acquire the gauge as an accessory if you need it. Fuel Gauge: Resistance (0-90 Ohm). Part Number: 150-FLG-01\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688126460244,"sku":"NP-150-FLS-10-01","price":229.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NukePerformanceFLS-0-90_2_bd3020c6-b8d9-45e7-aa6f-acc1b1978859.jpg?v=1788963919"},{"product_id":"jaula-soldable-para-pila-de-combustible-de-22-galones-radium-engineering","title":"Weldable Fuel Cell Cage for 22 Gallon, Radium Engineering","description":"\u003cp\u003eA welded cage facilitates fuel cell installation by offering a prefabricated, secure, and robust base. The bottom supports of the cage are made from 11-gauge stainless steel. The top cage is TIG hand-welded and made from 1\" x 1\" x 1\/16\" stainless steel tubing. Because the tubing is not mild carbon steel, it is corrosion-resistant. Welding is required and must be performed by a professional. RA series fuel cells fit perfectly into the cage and are held in place with the included anodized aluminum straps. All parts are corrosion-resistant.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688126886228,"sku":"USA-RAD-20-0922","price":547.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-0922.jpg?v=1788963994"},{"product_id":"junta-de-5-pernos-para-sensor-de-nivel-de-combustible-radium-engineering","title":"Radium Engineering fuel level sensor 5-bolt gasket","description":"\u003cp\u003eThis 5-bolt SAE pattern gasket is used in many fuel cell level sensors. The 1\/16\" thick material is a premium FKM variant.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688130326868,"sku":"USA-RAD-18-0020","price":12.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/gasket-5-bolt-fuel-level-sender-radium-engineering.jpg?v=1788963893"},{"product_id":"pila-de-combustible-nuke-performance-alucell-de-20-l-con-unidad-cfc-de-perfil-bajo-estandar","title":"Nuke Performance 20L AluCell Fuel Cell with Low Profile CFC Unit (Standard)","description":"\u003cp\u003eLightweight and cost-effective AluCell aluminum fuel cells are combined with the Nuke Performance surge tank (CFC unit). This product offers an affordable solution for those who do not require FIA homologation for professional competition but want to enjoy all the advantages of the Nuke Performance CFC unit. The fuel pump bracket with integrated surge tank provides this functionality, which includes:\u003c\/p\u003e\n\n\u003cp\u003e20 \/ 40 \/ 45WC \/ 60 \/ 80 liter aluminum fuel cell\u003cbr\u003e\nIntegrated 2-liter surge tank\u003cbr\u003e\nSuitable for all types of fuels, including E85\u003c\/p\u003e\n\n\u003cp\u003eIntegrated brackets for easy and secure mounting\u003c\/p\u003e\n\n\u003cp\u003eCompatible with single or dual high-pressure fuel pumps\u003cbr\u003e\nOversized AN-10 ORB outlet for maximum flow\u003c\/p\u003e\n\n\u003cp\u003eNEW: Available in a new 45-liter version\u003cbr\u003e\nLow-profile fuel filler cap with integrated roll-over valve\u003c\/p\u003e\n\n\u003cp\u003eNuke Performance AluCell fuel cells are compatible with carbureted fuel systems and the integrated Nuke Performance CFC unit. They eliminate the need for an external surge tank, which is essential for fuel cell operation, making them a perfect alternative for fuel injection systems. AluCell cells are made from the highest quality aluminum for use with all types of fuels and are approved for gasoline, methanol, and ethanol. AluCell Specifications\u003c\/p\u003e\n\n\u003cp\u003e40-liter AluCell Fuel Tank Part No.\u003c\/p\u003e\n\n\u003cp\u003e150-07-041\u003c\/p\u003e\n\n\u003cp\u003eLength\u003c\/p\u003e\n\n\u003cp\u003e555 mm (21.85”)\u003c\/p\u003e\n\n\u003cp\u003eDepth\u003c\/p\u003e\n\n\u003cp\u003e377 mm (14.84”)\u003c\/p\u003e\n\n\u003cp\u003eHeight\u003c\/p\u003e\n\n\u003cp\u003e251 mm (9.88”)\u003c\/p\u003e\n\n\u003cp\u003eWeight\u003c\/p\u003e\n\n\u003cp\u003e9050 g (19.95 lb), incl. CFC unit\u003c\/p\u003e\n\n\u003cp\u003eFuel Capacity\u003c\/p\u003e\n\n\u003cp\u003e40 liters (10.56 gallons)\u003c\/p\u003e\n\n\u003cp\u003eFor Motorsports Use\u003cbr\u003e\nYES\u003c\/p\u003e\n\n\u003cp\u003eHomologation\u003cbr\u003e\nNO\u003c\/p\u003e\n\n\u003cp\u003eEAN\u003cbr\u003e\n7340209500356\u003c\/p\u003e\n\n\u003cp\u003eThe AluCell Fuel Tank Kit includes:\u003c\/p\u003e\n\n\u003cp\u003e1 x 20-liter \/ 40-liter \/ 60-liter \/ 80-liter AluCell aluminum fuel tank\u003c\/p\u003e\n\n\u003cp\u003e1 x Nuke Performance CFC unit - low-profile version\u003c\/p\u003e\n\n\u003cp\u003e2 x 8 mm hose fittings with 1\/4\" BSPP to male thread\u003cbr\u003e\n1 x 1\/4\" BSPP plug, for use with a single high-pressure fuel pump\u003c\/p\u003e\n\n\u003cp\u003e2 x 39 mm inserts for high-pressure fuel pump bracket\u003c\/p\u003e\n\n\u003cp\u003e1 x Viton gasket for fuel tanks with 24-bolt pattern (suitable for alcohol fuels)\u003c\/p\u003e\n\n\u003cp\u003e1 x Low-profile filler cap (remote filler neck available as an accessory)\u003c\/p\u003e\n\n\u003cp\u003e1 x Machined aluminum dual fuel pump bracket and adjustable pickup pump bracket\u003c\/p\u003e\n\n\u003cp\u003e1 x AN-8 (3\/4 UNF) male to AN-6 vent safety valve\u003c\/p\u003e\n\n\u003cp\u003e1 x FLS spacer, for fuel level sensors with an asymmetrical bolt pattern\u003c\/p\u003e\n\n\u003cp\u003e24 x 1\/4-28 UNF x 1 screws with nylon washers\u003c\/p\u003e","brand":"Nuke Performance","offers":[{"title":"Default Title","offer_id":56688132817236,"sku":"NP-150-07-021","price":1343.83,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/NP-150-07-021.jpg?v=1788963927"},{"product_id":"soportes-para-bomba-de-elevacion-de-tanque-de-compensacion-de-celda-de-combustible-de-profundidad-media-radium-engineering","title":"Radium Engineering Mid-Depth Fuel Cell Surge Tank Lift Pump Brackets","description":"\u003cp\u003eFCST LIFT PUMP BRACKETS The brackets shown below are specific to the following FCST models: 20-014X-XX, 20-049X-XX, 20-069X-XX, and 20-099X-XX. NOTE: Lift pump mounting information for the new FCST-X (20-199X-XX) is at the bottom of this page. The kit includes 2 laser-cut polished stainless steel brackets. NOTE: The lift pump brackets included with the purchase of an FCST are designed for fuel cells with a maximum depth of 229mm (9\"). This measurement is taken from the bottom of the filler plate to the bottom of the lift pump filter.\u003c\/p\u003e\n\n\u003cp\u003eFCST LIFT PUMP BRACKETS 20-1014, MEDIUM DEPTH These lift pump brackets were designed specifically for Radium Engineering 53 and 85 liter (14 and 22 gallon) fuel cells. The internal depth of these cells is 290mm (11.4\").\u003cbr\u003e\nHowever, they allow the FCST lift pump to be mounted in a fuel tank with an internal depth of up to 323mm (12.7 inches).\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":56688138387796,"sku":"USA-RAD-20-1014","price":35.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/20-1014.jpg?v=1788963968"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/collections\/nuke-performance-alucell-fuel-cell-60l-with-nuke-performance-cfc-unit.webp?v=1788542773","url":"https:\/\/www.thetunerlab.com\/en\/collections\/sistema-de-combustible-pilas-de-combustible.oembed","provider":"Thetunerlab","version":"1.0","type":"link"}