{"title":"Electronica \/ CANchecked","description":null,"products":[{"product_id":"canchecked-display-mfd32-gen2-para-vw-arteon-i-08-16-passat-b8-2014-lhd","title":"CANchecked MFD32 Gen2 Display for VW Arteon I 08-16 Passat B8 2014+ LHD","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your VW Arteon I: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your air vent into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: Vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: View detailed vehicle data, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch display: Navigate pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN switching: Use the display as a keyboard and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eSet up your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can completely customize your display. With the integrated log viewer, you can download and visualize log files. In addition, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our internally CAN-verified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and record ethanol content and temperature directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445424468,"sku":"CC32091","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32091_01_f4db5a73-69a8-41bd-bc56-5184a654aea7.jpg?v=1788524684"},{"product_id":"canchecked-bmr01-monitorizacion-inalambrica-de-frenos-con-receptor","title":"CANchecked BMR01 - Wireless Brake Monitoring with Receiver","description":"\u003cp\u003eTMU and BMU Wireless Multichannel Infrared Sensors\u003c\/p\u003e\n\n\u003cp\u003eOur TMU and BMU wireless multichannel infrared sensors are advanced wireless multichannel infrared sensors for tire or brake temperature monitoring, with an external receiver and CAN connectivity. Fully configurable with 8 or 4 temperature channels per tire or brake disc, and a refresh rate of up to 50 Hz. Rechargeable battery with 15 hours of track use.\u003c\/p\u003e\n\n\u003cp\u003eKnowing the evolution of surface temperature during a lap is crucial for suspension adjustment, driver training, and setup selection. As it is a wireless system, its installation is very simple and can be moved from one vehicle to another in a matter of minutes.\u003cbr\u003e\nReceiver box - Technical specifications\u003c\/p\u003e\n\n\u003cp\u003eSupply voltage: 5-20 V\u003c\/p\u003e\n\n\u003cp\u003eCurrent consumption: 50 mA\u003c\/p\u003e\n\n\u003cp\u003eCable: 0.5 m AWG22\u003c\/p\u003e\n\n\u003cp\u003eConnector: DTM04-4P (DTM06-4S included)\u003c\/p\u003e\n\n\u003cp\u003eCommunication\u003c\/p\u003e\n\n\u003cp\u003eCAN standard: 2.0A (11-bit ID) or 2.0B\u003cbr\u003e\nBit rate: 500 kbps (standard) \/ 1 Mbps\u003cbr\u003e\nByte order: Big Endian (most significant bit first)\u003c\/p\u003e\n\n\u003cp\u003eCAN termination: none\u003cbr\u003e\nBase CAN ID: Standard 0x310 (tire) \/ 0x210 (brake), configurable via CAN\u003c\/p\u003e\n\n\u003cp\u003eTemperature conversion: -200 °C offset, 0.1 °C\/bit\u003c\/p\u003e\n\n\u003cp\u003eImportant information\u003c\/p\u003e\n\n\u003cp\u003eThe TMR01 or BMR01 is the single receiver box for our wireless tire and brake temperature sensors. When you purchase our TMU04 or BMU04 kit, this receiver box is always included and does not need to be purchased separately. If you purchase individual TMU01 or BMU01 sensors, you will need this receiver box for them to operate.\u003c\/p\u003e\n\n\u003cp\u003eThis system is ideal for monitoring tire and brake temperatures, and can improve your vehicle's performance and safety on the track.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445457236,"sku":"CC22957","price":343.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22951_23_a278cf1c-3feb-4378-a727-adb2f0cdaf4a.jpg?v=1788549063"},{"product_id":"ecu-independiente-canchecked-display-mfd28-gen2-para-porsche-911-997-lhd-04-12","title":"CANchecked MFD28 Gen2 Independent ECU Display for Porsche 911 \/ 997 LHD 04-12","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific for your Porsche 911 997: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily configure and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Record and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display dims automatically along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined sample pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. In these files, all queried sensors are defined. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda adjustment, long-term Lambda adjustment\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimp pins\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5 V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5 V and the signal. In this way, ethanol content and temperature can be displayed and recorded directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Features\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensors against each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445490004,"sku":"CC33002","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC33002_01_13a8c5a7-7601-4f43-b4c4-1efc84032213.jpg?v=1788476730"},{"product_id":"pantalla-canchecked-mfd32-gen2-para-vw-polo-6r-6c-gti-rhd-2010-2017","title":"CANchecked MFD32 Gen2 Display for VW Polo 6R\/6C GTI RHD 2010-2017","description":"\u003cp\u003eMFD32 Gen2 CANchecked specifically for your VW Polo MK5 6C: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed so that anyone can install them. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain features\u003c\/p\u003e\n\n\u003cp\u003ePerfect integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear indicator: Directly via Can Bus or calculated from speed and rpm.\u003cbr\u003e\nTouch screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images or start animations.\u003cbr\u003e\nAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance meter: Measure your 0-100 km\/h, 100-200 km\/h and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display dims automatically together with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5 V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5 V and the signal. This way, you can display and record the ethanol content and temperature directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced features\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445588308,"sku":"CC32083","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32083_01_0fbbb4c0-9b6a-48c1-9760-81cfa10a0d06.jpg?v=1788560872"},{"product_id":"pantalla-canchecked-mfd28-gen2-para-vw-bora-1j2-98-05-golf-mk4-r32-02-05","title":"CANchecked MFD28 Gen2 Display for VW Bora 1J2 98-05 Golf MK4 R32 02-05","description":"\u003cp\u003eMFD28 Gen2 CAN-certified for your VW Golf MK4 FL R32\/Bora: Seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your vent into a smart display with essential features. Our displays are designed for easy installation by anyone. Most include illustrated installation instructions, allowing you to install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: Vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, just like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch Screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. The integrated log viewer allows you to download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign min\/max values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: Which values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimping pins\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistor for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nProtective film for the display (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) between 5V and the signal is required. This way, the ethanol content and temperature can be displayed and logged directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can calculate sensors against each other. The user table allows generating additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445653844,"sku":"CC32031","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32031_01_a34f5f51-0041-4662-b854-2f9416d6a157.jpg?v=1788722344"},{"product_id":"canchecked-mfd15-embellecedor-de-52-mm-para-renault-clio-3-con-volante-a-la-izquierda","title":"CANchecked MFD15 - 52mm trim for Renault Clio 3 LHD","description":"\u003cp\u003eWith this specific vent cover for your Renault Clio 3, you have the option of installing 52mm gauges inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel integrates seamlessly into the interior and is compatible with standard 52mm gauges and, of course, our MFD15 Gen1 and Gen2. Our bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent cover, specific for Renault Clio 3 with left-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting the MFD32 in a 52mm bezel\u003cbr\u003e\nCC01002 MFD15 - 1.5 inch multifunction display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Quad AIN wiring 300 cm\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - Type K converter from 0 to 1250 °C\u003cbr\u003e\nCC22901 FLP01 - 0 to 10 bar (145 psi) pressure sensor M10x1\u003cbr\u003e\nCC22900 BST10 - 0 to 5.5 absolute bar (80 psi) pressure sensor\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445686612,"sku":"CC65001","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC65001_01_3f4d3f08-183d-4f75-88af-8ae417da4167.jpg?v=1788629078"},{"product_id":"pantalla-canchecked-mfd28-gen2-con-aire-acondicionado-para-bmw-serie-5-e34-con-volante-a-la-izquierda-1987-1996","title":"CANchecked MFD28 Gen2 Display with A\/C for BMW 5 Series E34 LHD (1987-1996)","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific to your BMW 5 Series E34: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Display of detailed vehicle data, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display dims automatically along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, mass airflow, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every delivery\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nPins for crimping\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is required between 5V and the signal. This way, the ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can calculate sensors against each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963445850452,"sku":"CC34021","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34021_01_b1796304-d632-4d2b-84ad-ac406582d88f.jpg?v=1788560818"},{"product_id":"embellecedor-canchecked-de-52-mm-para-mfd15-para-vw-golf-mk6-con-volante-a-la-derecha","title":"52mm CANchecked Trim for MFD15 for VW Golf MK6 Right Hand Drive.","description":"\u003cp\u003eWith this specific vent cover for your VW Golf MK6, you have the option to install 52mm gauges inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel seamlessly integrates into the interior and is compatible with standard 52mm gauges and, of course, our MFD15 Gen1 and Gen2. Our frames are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent cover, specific for VW Golf MK6 with right-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting the MFD32 in a 52mm frame\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch multifunction display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - 300 cm quadruple AIN wiring\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - Type K converter 0 to 1250 °C\u003cbr\u003e\nCC22901 FLP01 - 0 to 10 bar (145 psi) pressure sensor M10x1\u003cbr\u003e\nCC22900 BST10 - 0 to 5.5 bar absolute (80 psi) pressure sensor\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963446047060,"sku":"CC62011","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC62011_01_5e1d43d7-d9d9-46c6-ba1c-c8c8c112262e.jpg?v=1788674941"},{"product_id":"pantalla-multifuncion-canchecked-mfa28-gen2-para-audi-80-s2-rs2-b3-b4-1986-1991-con-volante-a-la-izquierda-derecha-cuadro-de-instrumentos","title":"CANchecked MFA28 Gen2 Multifunction Display for Audi 80 S2 RS2 B3 B4 1986 - 1991 Left\/Right-hand Drive (Instrument Cluster)","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific for your Audi 80 B4: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your speedometer into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: Vehicle-specific design.\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003c\/p\u003e\n\n\u003cp\u003eGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003c\/p\u003e\n\n\u003cp\u003eTouchscreen: Navigate through pages with intuitive gestures.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Design your own pages, add images, or start animations.\u003c\/p\u003e\n\n\u003cp\u003eAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003c\/p\u003e\n\n\u003cp\u003eCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Record and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eSet up your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked DSS, you can fully customize your display. With the integrated log viewer, you can download and visualize log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for vehicles with OEM dashboard\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5V sensors and NTC sensors. Our own certified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and recorded directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can perform calculations between sensors. The user table allows generating additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories:\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN Wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids, 1\/2 inch NPT\u003cbr\u003e\nCC22903 TCC01 - Type K Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963446702420,"sku":"CC31050","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC31050_01_930ae4ba-8703-45b4-84f0-a888c24d3cd0.jpg?v=1788681740"},{"product_id":"pantalla-multifuncion-canchecked-mfd32-gen2-para-toyota-yaris-gr-xp21-rhd-2020","title":"CANchecked MFD32 GEN2 Multifunction Display for Toyota Yaris GR XP21 RHD 2020 +","description":"\u003cp\u003eMFD32 Gen2 CANchecked specifically for your Toyota Yaris XP21: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your air vent into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003ePerfect Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Display detailed vehicle data, similar to manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch Screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Record and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear engine control unit, transmission, ABS, and all-wheel drive errors.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. In these files, all queried sensors are defined. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, mass airflow, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, specific values for diesel\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the vent insert for right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and record ethanol content and temperature directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963447030100,"sku":"CC37011","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC37011_01_15b510c2-4e5e-4ff8-bc55-1962ed650cb1.jpg?v=1788402055"},{"product_id":"canchecked-mfd28-gen2-para-skoda-octavia-4-nx-lhd","title":"CANchecked MFD28 Gen2 for Skoda Octavia 4 NX LHD","description":"\u003cp\u003eMFD28 Gen2 with CAN-specific certification for your Skoda Octavia NX: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keyboard and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily configure and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined sample pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors are fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary by engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 duty cycle in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later.\u003c\/p\u003e\n\n\u003cp\u003eScope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5V sensors and NTC sensors. Our self-certified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can perform calculations between sensors. The user table allows you to generate additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories:\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 0-5.5 bar absolute (80 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963447193940,"sku":"CC32200","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32200_01_90cc4b53-c198-4f7f-83c8-1c65fdc79a06.jpg?v=1788450573"},{"product_id":"pantalla-multifuncion-mfd28-gen2-con-certificacion-can-para-bmw-serie-3-e90-e91-e92-e93-2005-2013","title":"MFD28 GEN2 Multifunction Display with CAN Certification for BMW 3 Series E90 E91 E92 E93 (2005-2013)","description":"\u003cp\u003eThe MFD28 Gen2 multifunction display, specifically designed for your BMW 3 Series E90\/E91\/E92\/E93 and CAN certified, integrates seamlessly and allows you to view all information.\u003cbr\u003eThe MFD28 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions so you can install it yourself without needing a workshop.\u003cbr\u003eKey Features\u003c\/p\u003e\u003cp\u003eSeamless Integration: The vehicle-specific frame allows airflow around the display.\u003c\/p\u003e\u003cp\u003eCan Bus: Display detailed vehicle data, such as manufacturer diagnostic tools.\u003c\/p\u003e\u003cp\u003eGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003c\/p\u003e\u003cp\u003eTouchscreen: Intuitive navigation using touch gestures.\u003c\/p\u003e\u003cp\u003eCustomization: Design your own pages, add images, or start animations.\u003c\/p\u003e\u003cp\u003eAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\u003cp\u003eCan Switching: Use the display as a keypad and send your own Can messages to the bus.\u003c\/p\u003e\u003cp\u003eCustomizable Alarms: Easily set up and activate customizable alarms. For example, receive an alert when exhaust gas temperature exceeds 900 °C.\u003c\/p\u003e\u003cp\u003eData Logging: Save your data to the internal SD card for later analysis.\u003c\/p\u003e\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed. DTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\u003cp\u003eDifferent Views\u003c\/p\u003e\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\u003cp\u003eUp to ten pages available.\u003cbr\u003e20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\u003cp\u003eWidget colors are fully adjustable.\u003c\/p\u003e\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\u003cp\u003eWith CANchecked DSS, you can fully customize your display. The integrated log viewer allows you to download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\u003cp\u003eSupported Values\u003c\/p\u003e\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary by engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\u003cp\u003eTemperatures:\u003c\/p\u003e\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\u003cp\u003ePressures:\u003c\/p\u003e\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\u003cp\u003eLambda\/mixture\u003c\/p\u003e\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\u003cp\u003eOther\u003c\/p\u003e\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003cbr\u003eVehicle-specific connection cable\u003cbr\u003eQuick start guide\u003cbr\u003eUSB data cable\u003cbr\u003eSD card (pre-installed in the display)\u003cbr\u003eSD card adapter\u003cbr\u003eScreen protector film (to prevent reflections)\u003c\/p\u003e\u003cp\u003eConnection and Extension\u003c\/p\u003e\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\u003cp\u003eThe ethanol sensor connects directly to the display. It requires a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and log ethanol content and temperature directly on the screen.\u003c\/p\u003e\u003cp\u003eAdvanced Functions\u003c\/p\u003e\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003eOptional Accessories\u003c\/p\u003e\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003eCC22780 ANC04 - Four-way AIN harness\u003cbr\u003eCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003eCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003eCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003eCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003eCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963447259476,"sku":"CC34062","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34062_01.jpg?v=1788432514"},{"product_id":"cable-de-conexion-canchecked-mfd28-32-gen2-a-obd2-pin1-kl15-k-line-vag","title":"CANchecked MFD28 32 Gen2 to OBD2 Connection Cable - Pin1 KL15 K-Line (VAG)","description":"\u003cp\u003eOBD 2 Cable Kit for CANchecked MFD28 \/ MFD32 \/ MFD32S Displays, specifically designed for VW\/Audi and BMW\u003c\/p\u003e\n\n\u003cp\u003eWith our OBD 2 cable kit, you get the perfect accessory for the CANchecked MFD28 \/ MFD32 \/ MFD32S displays. This OBD 2 cable allows you to visualize OBD 2 values on your display.\u003c\/p\u003e\n\n\u003cp\u003eFinally, the OBD 2 cable for CANchecked displays is available! Installation only takes a few minutes, and you'll be able to conveniently read all OBD 2 values on your display. Even stored fault codes are displayed!\u003c\/p\u003e\n\n\u003cp\u003eSimply use the pre-configured OBD TRI files to easily display the values. This way, you'll have all important information at your fingertips.\u003cbr\u003e\nThe package includes:\u003c\/p\u003e\n\n\u003cp\u003eOBD connector with 2-meter (6 ft 6 in) cable for connection to MFD28\/MFD32\/MFD32S\u003c\/p\u003e\n\n\u003cp\u003eThe following pins are connected from the OBD connector to the display: Terminal 15 (Pin 1), Ground (Pins 4 \u0026amp; 5), CAN High (Pin 6), CAN Low (Pin 14)\u003c\/p\u003e\n\n\u003cp\u003eOur OBD 2 cable kit is compatible with all OBD 2 values output by the control unit. You can visualize up to 128 values on the display, allowing you to gain even more insight into your vehicle.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963447292244,"sku":"CC22711","price":48.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22711_01_2218e4ea-3e17-49b2-8ae8-775278523fd8.jpg?v=1788549010"},{"product_id":"licencia-canchecked-mfd15-mpp2","title":"CANchecked MFD15 MPP2 License","description":"\u003cp\u003eMPP2 License for MFD15\u003c\/p\u003e\n\n\u003cp\u003eIntroducing the MPP2 license: This license unlocks an additional output, allowing you to activate any external hardware with ease. It's like having a magic switch that enables you to control various devices, such as exhaust gates or auxiliary fans.\u003c\/p\u003e\n\n\u003cp\u003eTo use this feature, simply press one of the two front buttons or use the optional rotary knob. It's a simple and intuitive way to control your equipment and enhance your system's functionality.\u003c\/p\u003e\n\n\u003cp\u003eExpand your capabilities and adapt your system to your needs with the MPP2 license. Don't miss the opportunity to make your system even more versatile and efficient.\u003c\/p\u003e\n\n\u003cp\u003eOrder it now and discover the endless possibilities this license offers for your device. Enhance your control and convenience with the MPP2 license!\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963447652692,"sku":"CC22625","price":38.36,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22625_01_fbbb7409-f0f8-4181-8e05-7369f09aa956.jpg?v=1788537258"},{"product_id":"embellecedor-canchecked-de-52-mm-para-ford-fiesta-mk5-2001-2008","title":"CANchecked 52mm Gauge Pod for Ford Fiesta MK5 2001-2008","description":"\u003cp\u003eWith this specific vent pod for your Ford Fiesta MK5, you have the option to install 52mm gauges inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel seamlessly integrates into the interior and is compatible with standard 52mm gauges and, of course, with our MFD15 Gen1 and Gen2. Our bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent pod, specific for Ford Fiesta MK5 with left and right-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting MFD32 into a 52mm bezel\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch Multifunction display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Quad AIN wiring 300cm\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - K-type converter 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure sensor 0-5.5 bar absolute (80 psi)\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963448144212,"sku":"CC67003","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC67003_01_7f44d9d8-6bfc-47ac-a65d-b08ccaad6bd7.jpg?v=1788694833"},{"product_id":"sensor-de-temperatura-canchecked-ntc01-con-dtm04-3p-y-resistencia-integrada","title":"CANchecked NTC01 temperature sensor with DTM04-3P and integrated resistor.","description":"\u003cp\u003eOur new and improved NTC01 (CC22902) liquid temperature sensor is the ideal solution for monitoring the temperature of engine oil, water, transmission oil, and differential oil. We have simplified the connection process as much as possible so you can work faster and more efficiently.\u003c\/p\u003e\n\n\u003cp\u003eWhat's new?\u003c\/p\u003e\n\n\u003cp\u003eOur temperature sensor includes a 1 kΩ pull-up resistor and a DTM connector. This means you only need to connect it to 5 V, ground, and a signal line.\u003c\/p\u003e\n\n\u003cp\u003eFor MFD15\/MFD28\/MFD32 Gen2 devices, the TRI\/TRX file comes pre-configured so that when you connect the signal line directly to analog input 1, the values are displayed automatically.\u003c\/p\u003e\n\n\u003cp\u003eOf course, you can also connect the sensor to other analog inputs or components. Just enter the following characteristic curve and you're good to go.\u003cbr\u003e\nThe sensor has a 1\/8\" NPT thread (also compatible with M10x1) and should be tightened with a torque of 10 Nm.\u003c\/p\u003e\n\n\u003cp\u003ePackage contents:\u003c\/p\u003e\n\n\u003cp\u003eSensor with female connector and integrated resistor\u003c\/p\u003e\n\n\u003cp\u003eCompatible mating connector (DTM04-3P)\u003c\/p\u003e\n\n\u003cp\u003e3 DTM pins for easy connection (for automatic crimping)\u003c\/p\u003e\n\n\u003cp\u003eA Wedgelock (WM-3P) for secure and stable attachment of all components\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963448308052,"sku":"CC22915","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22915_01_a29539f6-834f-4a1c-ada9-490988519d19.jpg?v=1788515932"},{"product_id":"pantalla-canchecked-mfd32-gen2-para-vw-polo-mk5-6r-6c-incl-wrc-lhd-2009-2017","title":"CANchecked MFD32 Gen2 Display for VW Polo MK5 6R 6C incl. WRC LHD 2009 - 2017","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your VW Polo MK5 6R\/6C: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, just like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Record and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined sample pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. The integrated log viewer allows you to download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary by engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eBoost pressure, ambient pressure, pre-supply fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our internally CAN-verified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and log ethanol content and temperature directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-Way AIN Harness\u003cbr\u003e\nCC22100 CBD08 - Eight-Way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-Type Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963448799572,"sku":"CC32080","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32080_01_7cf29bbd-6677-4d1c-82c7-201aab41b1a6.jpg?v=1788461415"},{"product_id":"pantalla-canchecked-mfd15-gen2-para-opel-vivaro-b8-renault-clio-trafic-captur-con-volante-a-la-izquierda-derecha","title":"CANchecked MFD15 Gen2 Display for Opel Vivaro B8 Renault Clio\/Trafic\/Captur with left\/right hand drive","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display, specific to your Renault Clio MK4\/Opel Vivaro\/Alpine 110, you will always have all relevant values in view.\u003cbr\u003e\nThe MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific bezel and connection kit. It is operated via the two push buttons on the front panel. You can also connect our optional rotary knob.\u003cbr\u003e\nKey features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm depth.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLED on the front panel: The front LED on the display can be used as a shift light or a warning light.\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards, OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePre-defined alarms: Easily activate and customize pre-defined alarms. For example, get an alert when the exhaust gas temperature exceeds 900 degrees. Customization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline Logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlexible fuel*: View ethanol content and temperature on the display.\u003c\/p\u003e\n\n\u003cp\u003eCan switching*: Switch between Cans using the display buttons and send the readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize your display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog pointer\u003cbr\u003e\nDouble value\u003cbr\u003e\nGear indicator\u003cbr\u003e\nQuadruple values\u003cbr\u003e\nSextuple values\u003cbr\u003e\nBar + double display\u003cbr\u003e\nRound display\u003cbr\u003e\nBar graph (double horizontal)\u003cbr\u003e\nPerformance meter\u003cbr\u003e\nBar graph (1 to 6 vertical bars)\u003cbr\u003e\nSingle value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via the online Display Setting Software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to fully configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can completely configure your display, log values (license required), upload your own start-up image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported values\u003c\/p\u003e\n\n\u003cp\u003eA frequently asked question from customers is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is essential, possibly even in the form of a DBC file that can be imported via our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 and 29 bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 \u0026amp; 3\u003c\/p\u003e\n\n\u003cp\u003eIf your desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, also for older models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, selective cylinder ignition angle return, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts to flash.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage contents and extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in each package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Data Display\u003cbr\u003e\nVehicle-specific trim for left-hand and right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003cbr\u003e\nConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistor for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support linear 0-5 V sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves for our CAN-certified sensors are stored on the display from the factory and work immediately (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External rotary knob with 50 cm PnP connection cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - Type K transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - 6.5 bar (95 psi) relative pressure sensor\u003c\/p\u003e\n\n\u003cp\u003e*Additional licenses\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 real-time logging\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license \"Real-time Logging,\" your display can log sensor data in the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are logged (ATTENTION: for OBD and UDS, only those on display are shown). Select the sensors you wish to display graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol sensor for flexible fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5 V and the signal. You can now see the ethanol content as well as the fuel temperature and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN switching and AIN forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the keys on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963449127252,"sku":"CC55000","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC55000_01_26aea139-c068-469a-aa70-0c36e198da26.jpg?v=1788614963"},{"product_id":"kit-de-conexion-canchecked-mfd15-gen2","title":"CANchecked MFD15 Gen2 Connection Kit","description":"\u003cp\u003eMFD15 Connector Set\u003c\/p\u003e\n\n\u003cp\u003eThe ideal connector set for your CANchecked MFD15 displays. This set enables a reliable connection of your cables to your CANchecked display.\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked displays, you always have all relevant values in view. To ensure easy installation and connection, we offer you the right connector set.\u003c\/p\u003e\n\n\u003cp\u003eOur MFD15 connector set includes:\u003c\/p\u003e\n\n\u003cp\u003eConnector A\u003cbr\u003e\nConnector B\u003cbr\u003e\nSingle pins for self-crimping\u003cbr\u003e\nShort connecting cables\u003c\/p\u003e\n\n\u003cp\u003eWith this connector set, you can easily connect your display to the appropriate cables and benefit from its many functions and information.\u003c\/p\u003e\n\n\u003cp\u003eOrder your MFD15 connector set now and ensure a reliable connection between your cables and your CANchecked display. Make the most of the advantages of your display and always keep important data in view.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963449454932,"sku":"CC22762","price":28.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22762_01_7bd5678c-14a1-45dd-adac-0373c035fc42.jpg?v=1788397916"},{"product_id":"pantalla-canchecked-mfd28-gen2-para-vw-corrado-fl-lhd-1991-1995","title":"CANchecked MFD28 Gen2 Display for VW Corrado FL LHD 1991-1995","description":"\u003cp\u003eMFD28 Gen2 CAN-certified specifically for your VW Corrado FL: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey features\u003c\/p\u003e\n\n\u003cp\u003ePerfect Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Display detailed vehicle data, like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily configure and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors are fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered the data for most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All sensors that are queried are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOthers\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition advance, ignition advance retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every delivery\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nPins for crimping\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistor for connecting external NTC sensors)\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nProtective film for the screen (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support 0-5 V linear sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for Type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be set directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is needed between 5 V and the signal. In this way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can calculate sensors against each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963449979220,"sku":"CC32060","price":459.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32060_01_a1284419-2109-472b-aff6-c767dae48b29.jpg?v=1788701482"},{"product_id":"pantalla-mfd28-gen2-verificada-mediante-can-para-honda-civic-fk2-lhd","title":"MFD28 Gen2 display verified via CAN for Honda Civic FK2 LHD","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific to your Honda Civic FK2: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch Screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you'll receive an important warning when exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Record and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. The integrated log viewer allows you to download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 duty cycle in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later.\u003c\/p\u003e\n\n\u003cp\u003eScope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5V sensors and NTC sensors. Our self-certified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can perform calculations between sensors. The user table allows you to generate additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories:\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003eCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22904 BST10 - Pressure sensor, 0-5.5 bar absolute (80 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450044756,"sku":"CC36053","price":474.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC36053_01_4e31eb1e-f732-4a5e-ae67-f82a8be716b4.jpg?v=1788560877"},{"product_id":"pantalla-canchecked-mfd28-gen2-para-bmw-x3-x4-g01-g02-f97-f98-fl-lhd","title":"CANchecked MFD28 Gen2 Display for BMW X3 X4 G01 G02 F97 F98 FL LHD","description":"\u003cp\u003eThe MFD28 Gen2 multifunction display, specifically for your BMW X Series (X3, X4, G01, G02, F97, F98, FL), with CAN certification, integrates seamlessly and displays all information clearly.\u003cbr\u003eThe MFD28 Gen2 transforms the ventilation grille into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003cbr\u003eKey Features\u003c\/p\u003e\u003cp\u003eSeamless Integration: The vehicle-specific bezel allows airflow around the display.\u003c\/p\u003e\u003cp\u003eCan Bus: Display detailed vehicle data, such as manufacturer diagnostic tools.\u003c\/p\u003e\u003cp\u003eGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003c\/p\u003e\u003cp\u003eTouch Screen: Intuitive navigation via touch gestures.\u003c\/p\u003e\u003cp\u003eCustomization: Design your own pages, add images, or start animations.\u003c\/p\u003e\u003cp\u003eAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\u003cp\u003eCan Switching: Use the display as a keypad and send your own Can messages to the bus.\u003c\/p\u003e\u003cp\u003eCustomizable Alarms: Easily configure and activate customizable alarms. For example, receive an alert when the exhaust gas temperature exceeds 900 °C.\u003c\/p\u003e\u003cp\u003eData Logging: Save your data to the internal SD card for later analysis.\u003c\/p\u003e\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed. DTC*: Read and clear engine control unit, transmission, ABS, and all-wheel drive errors.\u003c\/p\u003e\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\u003cp\u003eDifferent Views\u003c\/p\u003e\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\u003cp\u003eUp to ten pages available.\u003cbr\u003e20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\u003cp\u003eWidgets can be scaled and positioned by drag and drop.\u003c\/p\u003e\u003cp\u003eWidget colors are fully adjustable.\u003c\/p\u003e\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\u003cp\u003eSupported Values\u003c\/p\u003e\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\u003cp\u003eTemperatures:\u003c\/p\u003e\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\u003cp\u003ePressures:\u003c\/p\u003e\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\u003cp\u003eLambda\/mixture\u003c\/p\u003e\u003cp\u003eLambda value, injection time, short-term Lambda adjustment, long-term Lambda adjustment\u003c\/p\u003e\u003cp\u003eOthers\u003c\/p\u003e\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 timing in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\u003cp\u003eIf values are missing, they can be added later.\u003c\/p\u003e\u003cp\u003eScope of Delivery\u003c\/p\u003e\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\u003cp\u003eMFD28 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003cbr\u003eVehicle-specific connection cable\u003cbr\u003eQuick start guide\u003cbr\u003eUSB data cable\u003cbr\u003eSD card (pre-installed in the display)\u003cbr\u003eSD card adapter\u003cbr\u003eProtective film for the screen (to prevent reflections)\u003c\/p\u003e\u003cp\u003eConnection and Expansion\u003c\/p\u003e\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5 V sensors and NTC sensors. Our own certified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) between 5 V and the signal is required. This way, the ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\u003cp\u003eAdvanced Functions\u003c\/p\u003e\u003cp\u003eWith mathematical channels, you can perform calculations between sensors. The user table allows generating additional sensors with 2D or 3D maps.\u003c\/p\u003e\u003cp\u003eOptional accessories:\u003c\/p\u003e\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003eCC22780 ANC04 - Four-way AIN wiring\u003cbr\u003eCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003eCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003eCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003eCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003eCC22904 BST10 - Pressure sensor, 0-6.5 bar (95 psi)\u003c\/p\u003e\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450077524,"sku":"CC34083","price":474.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34083_01_65dc8f02-b236-4ab0-b998-d801f4e944e4.jpg?v=1788614978"},{"product_id":"juego-de-enchufes-para-cable-universal-canchecked-mfd15-mce08","title":"CANchecked MFD15\/MCE08 Universal Cable Plug Kit","description":"\u003cp\u003eCanchecked MFD15 connection kit including \"C\" connector housing (12-pin) and individual contacts for self-crimping.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450306900,"sku":"CC22763","price":28.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/canchecked_2_e247bf57-3e61-4b18-86dc-3e369d80b503.jpg?v=1788427417"},{"product_id":"bisel-canchecked-de-52-mm-para-mfd15-para-jeep-compass-patriot-lhd-rhd","title":"CANchecked 52mm Bezel for MFD15 for Jeep Compass Patriot LHD \/ RHD","description":"\u003cp\u003eWith this specific vent cover for your Jeep Compass Patriot, you have the option to install 52mm displays inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel integrates seamlessly into the interior and is compatible with standard 52mm displays and, of course, our MFD15 Gen1 and Gen2. Our bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent cover, specific for Jeep Compass Patriot with left and right-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting MFD32 in a 52mm bezel\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch multi-function display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - 300 cm AIN quadruple wiring harness\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - Type K converter from 0 to 1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor from 0 to 10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST01 - Pressure sensor from 0 to 5.5 bar absolute (80 psi)\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450339668,"sku":"CC67302","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC67302_01_518b7546-50f3-49cd-94a9-d1b92925efb5.jpg?v=1788473071"},{"product_id":"extension-de-bus-can-multifuncion-mce18-verificada-por-can","title":"CAN-verified MCE18 multifunction CAN bus extension","description":"\u003cp\u003eCANchecked MCE18 - Multifunction CAN Bus Extension\u003c\/p\u003e\n\n\u003cp\u003eMCE18, the ultimate multifunction CAN Bus extension! But what exactly is the MCE18 and why do you need it?\u003c\/p\u003e\n\n\u003cp\u003eThe MCE18, an acronym for \"Multifunction Can Bus Extension,\" is a versatile module that can be indispensable in various applications. Our range of displays, including MFD15, MFD28, MFD32, and MFD32S, come standard with four analog inputs. This is sufficient in most cases, but there are situations where more inputs are needed to meet specific requirements.\u003c\/p\u003e\n\n\u003cp\u003eIn these cases, the MCE18 offers the perfect solution. You can easily connect your sensors to this module and transmit the data to the desired device using the flexible CAN Bus protocol, whether it's one of our displays or another compatible device.\u003c\/p\u003e\n\n\u003cp\u003eBut not only displays benefit from our MCE18. Programmable control units often also have a limited number of inputs. With our module, you can easily expand these inputs and send the data directly to the control unit to meet your needs.\u003c\/p\u003e\n\n\u003cp\u003eThese are the main features of the MCE18: - 9 analog inputs in the 0 to 5 volt range to capture a wide range of sensor information. - 8 digital inputs for monitoring the status of switches, buttons, or other on\/off devices. - 3 digital outputs (new in version 2!), capable of supporting up to 500 mA and switching to ground (LOW SIDE).\u003c\/p\u003e\n\n\u003cp\u003eOur products have been rigorously tested and are compatible with various devices, including CANchecked MFD28, MFD32, MFD32S, MaxxECU, Ecumaster, LinkECU, Haltech (emulating an IO Extender A+B or only B), and will soon also be compatible with Syvecs and Motec.\u003cbr\u003e\nIn the MCE18 package you will find: - The MCE18 module with housing. - A 34-pin Superseal connector (TE 4-1437290-0) for a reliable connection. - Superseal 1.0 20AWG pins (TE 3-1447221-4) for stable wiring. - 3 jumpers to customize the configuration according to your needs (Can Bus termination, 2 1K pull-up resistors for NTC sensors).\u003c\/p\u003e\n\n\u003cp\u003eA particularly noteworthy feature of the MCE18 are its three digital outputs, switchable to ground (LOW SIDE) and capable of up to 500 mA.\u003c\/p\u003e\n\n\u003cp\u003eIf you are looking for a flexible and reliable way to expand your analog and digital inputs and communicate via Can Bus, the MCE18 is the perfect solution. Order it today and optimize your electronic systems!\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450667348,"sku":"CC22811","price":225.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22811_01_2661a025-8004-4d6f-9d0b-a0abd4f2a46a.jpg?v=1788553464"},{"product_id":"pantalla-canchecked-mfd15-gen2-para-vw-golf-mk3-tipo-1h-con-volante-a-la-izquierda-1991-1998","title":"CANchecked MFD15 Gen2 Display for VW Golf MK3 (Type 1H) left-hand drive, 1991-1998","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display specific to your VW Golf MK3, you will always have all relevant values in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and connection kit. Operation is via two buttons on the front panel. You can also connect our optional rotary knob.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52mm diameter and only 12.5mm deep.\u003c\/p\u003e\n\n\u003cp\u003eLED on the front panel: The LED on the display's front can be used as a shift light or a warning LED.\u003cbr\u003e\nCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards, with OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional Inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePre-defined Alarms: Easily activate and customize pre-defined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline Logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlex Fuel*: Display ethanol content and temperature on the screen.\u003c\/p\u003e\n\n\u003cp\u003eCan Switching*: Switch between cans using the buttons on the display and send the readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize the display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog Pointer\u003cbr\u003e\nDual Value\u003cbr\u003e\nGear Indicator\u003cbr\u003e\nQuad Values\u003cbr\u003e\nSextuple Values\u003cbr\u003e\nBar + Dual Display\u003cbr\u003e\nRound Display\u003cbr\u003e\nBar Graph (Dual Horizontal)\u003cbr\u003e\nPerformance Meter\u003cbr\u003e\nBar Graph (1 to 6 Vertical Bars)\u003cbr\u003e\nSingle Value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via the online display setup software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew for our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can completely configure your display, log values (license required), upload your own start-up image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eCompatible Values\u003c\/p\u003e\n\n\u003cp\u003eA frequently asked customer question is: What values can I query from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eThe ECU manufacturers determine which values are sent via the CAN bus interface. Documentation is essential here, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 \u0026amp; 29 bit - Ecumaster - Classic \u0026amp; Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 \u0026amp; 3\u003c\/p\u003e\n\n\u003cp\u003eIf your desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, earlier models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle feedback, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as both a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents \u0026amp; Extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Data Display\u003cbr\u003e\nVehicle-specific trim for left-hand drive\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables in different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nPins for crimping\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistors for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support 0-5V linear sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves of our CAN-certified sensors are stored in the display ex-factory and work out-of-the-box (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External Rotary Knob with 50cm PnP Connection Cable\u003cbr\u003e\nCC22100 CBD08 - Eight-Way CAN Distribution Hub\u003cbr\u003e\nCC22780 ANC04 - Four-Way AIN Harness\u003cbr\u003e\nCC22902 NTC01 - Liquid Temperature Sensor 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - Type K Transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Relative Pressure Sensor 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Additional Licenses\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Real-time Logging\u003c\/p\u003e\n\n\u003cp\u003eWith the \"Real-time Logging\" add-on license, your display can log sensor data in the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are logged (ATTENTION: for OBD and UDS, only those on display are shown). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol Sensor for Flex Fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content as well as the fuel temperature and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching and AIN Forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the add-on license for CAN switching and AIN forwarding, you can use the keys on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450765652,"sku":"CC51005","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC51005_01_373e5c50-27ca-4b2e-bba0-a69d72c04aef.jpg?v=1788538452"},{"product_id":"canchecked-mfd15-bisel-de-52-mm-para-mini-r55-r56-r57-r58-adaptador-de-tablero-mfd15","title":"CANchecked MFD15 - 52mm Bezel for Mini R55 R56 R57 R58 MFD15 Dashboard Adapter","description":"\u003cp\u003eWith this specific cover for the dashboard of your Mini Cooper R55\/56\/57\/58, you have the option to install 52mm displays inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel integrates perfectly into the interior and is compatible with standard 52mm displays and, of course, with our MFD15 Gen1 and Gen2. Our products are 3D printed and have been meticulously redesigned to imitate the look and feel of the original interior.\u003cbr\u003e\nPackage Contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003eDashboard adapter, specific for Mini Cooper R55\/56\/57\/58 with left-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter to mount the MFD32 in a 52mm frame\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch multi-function display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - 300cm quad AIN wiring\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - 0 to 1250 °C Type K converter\u003cbr\u003e\nCC22901 FLP01 - 0 to 10 bar (145 psi) M10x1 pressure sensor\u003cbr\u003e\nCC22900 BST10 - 0 to 5.5 bar absolute (80 psi) pressure sensor\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450863956,"sku":"CC64002","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC64002_01_c77a7440-a53c-486d-ac62-ce5e6542e745.jpg?v=1788422416"},{"product_id":"bisel-canchecked-de-52-mm-para-mfd15-para-hyundai-kona-n-gen1-lhd","title":"52mm CANchecked Bezel for MFD15 for Hyundai Kona N Gen1 LHD","description":"\u003cp\u003eWith this specific vent cover for your Hyundai Kona N Gen1, you have the option to install 52mm gauges inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel seamlessly integrates into the interior and is compatible with standard 52mm gauges, and of course, with our MFD15 Gen1 and Gen2 multifunction displays. Our bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original air vents.\u003cbr\u003e\nPackage Contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent cover, specific for Hyundai Kona N Gen1 with left-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting MFD32 in a 52mm frame\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch multifunction display (2nd generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Quad AIN wiring harness 300 cm\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - Type K converter 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure sensor 0-5.5 bar absolute (80 psi)\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963450896724,"sku":"CC68200","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC68200_01_319fcec5-80a7-4058-9dc9-a3435fdb0b4b.jpg?v=1788473067"},{"product_id":"sensores-analogicos-con-arnes-compatible-con-canchecked-anc04","title":"Analog sensors with harness compatible with CANchecked ANC04","description":"\u003cp\u003eANC04 wiring harness for MFD15\/28\/32\u003c\/p\u003e\n\n\u003cp\u003eWith the ANC04, you can easily connect up to four analog sensors to your MFD15\/28\/32 without worrying about wiring or crimping contacts. The ANC04 is directly compatible with our sensors. Following the wiring diagram we provide, the NTC01 (NTC temperature sensor), TCC01 (K-type exhaust gas temperature converter), FLP01 (pressure sensor for liquids), and BST10 (boost pressure sensor) sensors work seamlessly.\u003c\/p\u003e\n\n\u003cp\u003eThis means: connect the connectors to the supplied plug, insert the wiring harness into the display, assign the corresponding widgets on the display, and you're ready to hit the road.\u003cbr\u003e\nFeatures:\u003c\/p\u003e\n\n\u003cp\u003ePlug-and-play connection with our own sensors\u003c\/p\u003e\n\n\u003cp\u003eUniform color for clean wiring\u003c\/p\u003e\n\n\u003cp\u003eNo special tools required - professionally crimped pins\u003c\/p\u003e\n\n\u003cp\u003e300 cm length for any application\u003cbr\u003e\nIndividual wires for maximum flexibility\u003cbr\u003e\nInsulated wires for increased durability\u003c\/p\u003e\n\n\u003cp\u003eThe ANC04 connector must be connected to both the display and the counter plugs of the sensors.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963451027796,"sku":"CC22780","price":58.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22780_01_f2d71df4-a9f9-4a20-8586-df439b5e4155.jpg?v=1788683707"},{"product_id":"pantalla-canchecked-mfd32-gen2-preensamblada-para-bmw-serie-3-y-4-m2-coupe-g80-g81-g83-con-volante-a-la-derecha-2021","title":"CANchecked MFD32 Gen2 Pre-Assembled Display for BMW 3 and 4 Series M2 Coupe G80 G81 G83 RHD (2021+)","description":"\u003cp\u003eMFD32 Gen2 specific for your BMW 3 Series G80\/G81\/G83: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms the ventilation grille into an intelligent display with indispensable functions. Our displays are designed so that anyone can install them. Most include illustrated installation instructions, so you can install yours without the need for a workshop.\u003cbr\u003e\nKey features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows for airflow around the display.\u003c\/p\u003e\n\n\u003cp\u003eCan Bus: Display detailed vehicle data, such as manufacturer diagnostic tools.\u003c\/p\u003e\n\n\u003cp\u003eGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003c\/p\u003e\n\n\u003cp\u003eTouch Screen: Intuitive navigation via touch gestures.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Design your own pages, add images, or start animations.\u003c\/p\u003e\n\n\u003cp\u003eAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\n\n\u003cp\u003eCan Switching: Use the display as a keyboard and send your own Can messages to the bus.\u003c\/p\u003e\n\n\u003cp\u003eCustomizable Alarms: Easily configure and activate customizable alarms. For example, receive an alert when the exhaust gas temperature exceeds 900 °C.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed. DTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. In addition, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols), as well as querying data via K-Line (ISO 9141).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. In these files, all queried sensors are defined. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term lambda trim, long-term lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5 V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST01)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5 V and the signal. This way, you can display and record ethanol content and temperature directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced features\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST01 - Pressure sensor, 0-5.5 bar absolute (80 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963451224404,"sku":"CC34075","price":584.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34075_01_8616179f-358e-4ddf-aa92-3f90367c859b.jpg?v=1788461421"},{"product_id":"cable-de-extension-canchecked-dtm2dtm-de-35-m","title":"CANchecked DTM2DTM Extension Cable 3.5m","description":"\u003cp\u003eCANchecked DTM-Line Cable: Robust, Versatile, and Reliable\u003c\/p\u003e\n\n\u003cp\u003eOur CANchecked DTM-Line cables are the perfect solution for demanding applications in the automotive and racing sectors. Thanks to their high-quality manufacturing, intelligent design, and first-class materials, they offer maximum performance and durability.\u003c\/p\u003e\n\n\u003cp\u003eProduct Features:\u003c\/p\u003e\n\n\u003cp\u003eDifferent lengths to suit every need: Available in 0.5m, 1m, 2m, and 3.5m to meet your specific requirements.\u003c\/p\u003e\n\n\u003cp\u003eWaterproof and robust: Thanks to DTM06-4S-E007 connectors with bend protection at both ends, the cable maintains its reliability even under extreme conditions.\u003c\/p\u003e\n\n\u003cp\u003eHigh-quality cable structure:\u003c\/p\u003e\n\n\u003cp\u003e4 twisted pairs of 22 AWG (red \u0026amp; black as well as yellow \u0026amp; white) for optimal signal transmission.\u003c\/p\u003e\n\n\u003cp\u003eBlack PVC jacket, flame-retardant and resistant to gasoline, diesel, and oil.\u003cbr\u003e\nOuter diameter: 6.2 mm\u003c\/p\u003e\n\n\u003cp\u003ePin assignment according to our CANchecked standard:\u003c\/p\u003e\n\n\u003cp\u003ePin 1: GND\u003c\/p\u003e\n\n\u003cp\u003ePin 2: 12V+\u003c\/p\u003e\n\n\u003cp\u003ePin 3: CAN Low\u003c\/p\u003e\n\n\u003cp\u003ePin 4: CAN High\u003c\/p\u003e\n\n\u003cp\u003eVersatile:\u003c\/p\u003e\n\n\u003cp\u003eOur DTM-Line cables are compatible with our CBD08 and TCCXX models, as well as the Tire \u0026amp; Brake Monitor, and also with DTM products from other manufacturers. The DTM-Line offers maximum flexibility for integration into existing systems.\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked DTM-Line cables, you can rely on reliable data transmission, robust construction, and maximum quality, ideal for demanding environments. Trust in technology that delivers on its promises.\u003c\/p\u003e\n\n\u003cp\u003eCANchecked: Perfection for Professionals.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963451421012,"sku":"CC00350","price":46.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC00350_01_be53f291-6f82-4f83-812e-15f244c9d0e7.jpg?v=1788524563"},{"product_id":"mfd15-gen2-verificado-mediante-can-para-fiat-punto-evo-con-volante-a-la-izquierda-derecha","title":"MFD15 Gen2 verified via CAN for Fiat Punto EVO with left\/right-hand drive.","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display specifically for your Fiat Punto EVO, you will always have all relevant values in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and a connection kit. It is operated by two buttons on the front panel. You can also connect our optional rotary knob.\u003c\/p\u003e\n\n\u003cp\u003eMain features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eLED on the front panel: The LED on the display's front panel can be used as a shift light or a warning light.\u003cbr\u003e\nCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards with OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePredefined alarms: Easily activate and customize predefined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline logging*: Record your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlexible fuel*: View ethanol content and temperature on the display.\u003c\/p\u003e\n\n\u003cp\u003eCan switching*: Switch between cans using the buttons on the display and send the readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize the display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog pointer\u003cbr\u003e\nDouble value\u003cbr\u003e\nGear indicator\u003cbr\u003e\nQuadruple values\u003cbr\u003e\nSextuple values\u003cbr\u003e\nBar + double display\u003cbr\u003e\nRound display\u003cbr\u003e\nBar chart (double horizontal)\u003cbr\u003e\nPerformance meter\u003cbr\u003e\nBar chart (1 to 6 vertical bars)\u003cbr\u003e\nSingle value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration using the online display configuration software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can completely configure your display, log values (license required), upload your own start image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported values\u003c\/p\u003e\n\n\u003cp\u003eA frequently asked customer question is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is essential, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Vehicle-specific protocols such as UDS or TP2 are also available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 and 29-bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3\u003c\/p\u003e\n\n\u003cp\u003eIf the desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, also for earlier models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, selective cylinder ignition angle feedback, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it begins to flash.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or is below the minimum, the LED flashes in the pre-configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage contents and extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in each package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 data display\u003cbr\u003e\nVehicle-specific trim for left-hand and right-hand drive\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003cbr\u003e\nConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistor for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support 0-5 V linear sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves of our CAN-certified sensors are stored in the factory display and work immediately (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not preconfigured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not preconfigured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External rotary knob with 50 cm PnP connection cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - K-type transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure sensor 0-5.5 bar absolute (80 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Additional licenses\u003c\/p\u003e\n\n\u003cp\u003eReal-time logging of the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license \"Real-time logging\", your display can record sensor data in the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are recorded in the log (ATTENTION: for OBD and UDS, only those on display are shown). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol sensor for flexible fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5 V and the signal. Now you can see the ethanol content, as well as the fuel temperature, and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN switching and AIN forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the buttons on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963451912532,"sku":"CC58002","price":300.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC58002_01_a8ef01e9-c685-428b-a784-1209a846b4ed.jpg?v=1788461021"},{"product_id":"convertidor-de-termopar-canchecked-tcc06-con-dtm-de-4-vias","title":"CANchecked TCC06 Thermocouple Converter with 4-way DTM","description":"\u003cp\u003eThermocouple Converter (TCC06) with 4-Pin DTM Connector\u003c\/p\u003e\n\n\u003cp\u003eDiscover the TCCXX family: the enhanced version of our reliable TCC01! Wondering what makes the TCC06 so special? The main difference lies in the data transmission method. While the TCC01 outputs an analog 0-5 volt signal, the TCC06 sends its readings directly to the CAN bus. Our TCCXX family is available in four different sizes and versions: TCC04, TCC06, TCC08, and TCC10.\u003c\/p\u003e\n\n\u003cp\u003eWith TCCXX modules, you can connect up to ten K-type thermocouples and conveniently transmit readings via the CAN bus or monitor them directly on your device with a WLAN connection.\u003c\/p\u003e\n\n\u003cp\u003eK-type thermocouples are highly versatile. You can use them to measure exhaust gas temperature (EGT), temperature before and after the intercooler, cylinder head temperature, water temperature, oil temperature, and much more. The best part is that all measurements are cold-junction compensated and offer an impressive measurement range of 0 to 1250 °C with a resolution of 0.25 °C (14 bits).\u003c\/p\u003e\n\n\u003cp\u003eTCC04 modules include a practical four-pin DTM connector for CAN and miniaturized K connectors. They are compatible with the CAN 2.0A\/B standard and offer flexible configuration, meaning they are compatible with a variety of devices from other manufacturers.\u003c\/p\u003e\n\n\u003cp\u003eBut the most outstanding feature of the TCCXX models is, without a doubt, their WLAN connectivity. You can easily configure and update your module, as well as get real-time temperature data and thermocouple status using your smartphone or PC.\u003c\/p\u003e\n\n\u003cp\u003eSetting up devices via WLAN is very simple:\u003c\/p\u003e\n\n\u003cp\u003e- You can configure the CAN speed: 125 kbps, 250 kbps, 500 kbps, or 1 Mbps. - Choose from different emulation modes: Standard, Motec, Haltech, Ecumaster, or AEMnet. - Adjust the default CAN bus ID and select between Big Endian or Little Endian. And best of all: our TCCXX models are compatible with a wide range of control units, including Emtron, MaxxECU, Motec, Haltech, Ecumaster (black\/classic), LinkECU, and many more.\u003cbr\u003e\nImmerse yourself in the world of TCCXX and experience the future of temperature measurement and monitoring. With this innovative technology, you'll be perfectly equipped for any application. Get your TCCXX module now and embark on the future of temperature measurement!\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963451978068,"sku":"CC22926","price":313.81,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22926_01_c93b08fa-30d2-41bc-bcc4-87c1e5078437.jpg?v=1788694345"},{"product_id":"pantalla-canchecked-mfd28-gen2-para-vw-corrado-vfl-con-volante-a-la-derecha-1988-1991","title":"CANchecked MFD28 Gen2 Display for VW Corrado Pre-Facelift Right-Hand Drive (1988-1991)","description":"\u003cp\u003eMFD28 Gen2 with CAN certification specific for your pre-FL VW Corrado: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCAN Bus: Displays detailed vehicle data, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via CAN Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch Screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can completely customize your display. The integrated log viewer allows you to download and visualize log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-supply fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of Delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with each shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for right-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables in different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nPins for crimping\u003c\/p\u003e\n\n\u003cp\u003eTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nProtective film for the screen (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can calculate sensors against each other. The user table allows generating additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN Harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids, 1\/2 inch NPT Thread\u003cbr\u003e\nCC22903 TCC01 - K-Type Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1 Thread\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963452174676,"sku":"CC32071","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32071_01_92987f64-656e-4104-8ae9-5eff70dfc550.jpg?v=1788560834"},{"product_id":"licencia-canchecked-mfd28-32-hle01-haldex-gen1-gen2","title":"CANchecked MFD28\/32 HLE01 Haldex Gen1 Gen2 License","description":"\u003cp\u003eHaldex HLE01 Control for MFD28 and MFD32\u003c\/p\u003e\n\n\u003cp\u003eThe HLE01 is our Haldex control for MFD28 and MFD32 displays. Once the license is activated on your display, you can create a Multiswitch widget and adjust the Haldex locking percentage from 0 to 100%.\u003c\/p\u003e\n\n\u003cp\u003eImportant: Ensure there is no ABS signal on your CAN bus. The ABS must be separate from the CAN bus, or a separate CAN bus must be used exclusively for the display and Haldex.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963452272980,"sku":"CC22300","price":126.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22300_01_debe1fc4-3d22-4bdd-8d97-0776f5f70292.jpg?v=1788483242"},{"product_id":"pantalla-canchecked-mfd28-gen2-para-bmw-serie-5-e60-e61-con-volante-a-la-derecha-2003-2010","title":"CANchecked MFD28 Gen2 Display for BMW 5 Series E60 E61 Right-Hand Drive (2003-2010)","description":"\u003cp\u003eMFD28 Gen2 specific for your BMW 5 Series E60\/E61: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003ePerfect Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCan Switching: Use the display as a keyboard and send your own Can messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All sensors queried are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/mixture\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda value, injection time, short-term Lambda adjustment, long-term Lambda adjustment\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the vent insert for right-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5 V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor connects directly to the display. It requires a pull-up resistor (10 kΩ) between 5 V and the signal. This way, you can display and log ethanol content and temperature directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Lighting Module\u003cbr\u003e\nCC22780 ANC04 - Four-Way AIN Harness\u003cbr\u003e\nCC22100 CBD08 - Eight-Way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963452895572,"sku":"CC34071","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34071_01_6172400c-4314-44a4-9471-3605b60908cf.jpg?v=1788658550"},{"product_id":"sistema-de-monitoreo-inalambrico-de-temperatura-del-conjunto-de-frenos-canchecked-bmu04-con-caja-de-carga","title":"CANchecked BMU04 Wireless Brake Temperature Monitoring System with Load Box","description":"\u003cp\u003eWireless Brake Temperature Monitor with Full Charging and Storage Case - BMU04\u003c\/p\u003e\n\n\u003cp\u003eEnhance your vehicle's performance monitoring with the Wireless Temperature Monitor – a high-performance wireless system featuring advanced infrared temperature sensors and CAN connectivity. This comprehensive kit includes four multi-channel sensors, a CAN receiver, and now a complete charging case that not only charges all four sensors simultaneously but also offers dedicated storage for the CAN receiver. With this added functionality, you’ll have an organized, ready-to-use system, boasting simple setup and seamless mobility between vehicles.\u003cbr\u003e\nKey Features:\u003c\/p\u003e\n\n\u003cp\u003eWireless and Easy to Install: Simple setup with rapid transfer between vehicles.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Multichannel Infrared Monitoring:\u003c\/p\u003e\n\n\u003cp\u003e8 configurable channels per tire or brake disc.\u003c\/p\u003e\n\n\u003cp\u003eAdjustable update frequency up to 50 Hz for precise, real-time feedback.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated Charging and Storage Case:\u003c\/p\u003e\n\n\u003cp\u003eSimultaneously charges all four temperature sensors, ensuring they’re always track-ready.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated storage compartment for secure and convenient transport of the CAN receiver box.\u003c\/p\u003e\n\n\u003cp\u003eRechargeable Battery for Extended Use:\u003c\/p\u003e\n\n\u003cp\u003e250 mAh battery (USB-C charged) in each sensor.\u003c\/p\u003e\n\n\u003cp\u003eDelivers up to 15 hours of active track use per charge.\u003c\/p\u003e\n\n\u003cp\u003eHigh Accuracy and Wide Temperature Range:\u003c\/p\u003e\n\n\u003cp\u003eOperating Range: -40 to +800 °C.\u003c\/p\u003e\n\n\u003cp\u003eField of View: 110° x 6° for comprehensive coverage, with an optional 55° field for focused measurements.\u003c\/p\u003e\n\n\u003cp\u003eRobust and Compact Design:\u003c\/p\u003e\n\n\u003cp\u003eDimensions: 64.0 x 42.0 x 17.5 mm\u003c\/p\u003e\n\n\u003cp\u003eWeight: 57 g\u003cbr\u003e\nDurable Aluminum\/Polyamide housing with IP65 rating for demanding environments.\u003c\/p\u003e\n\n\u003cp\u003eOperating Temperature: -40 to +85 °C\u003c\/p\u003e\n\n\u003cp\u003eOptional Protective Lens: Available for added durability and protection.\u003c\/p\u003e\n\n\u003cp\u003eReceiver Specifications:\u003c\/p\u003e\n\n\u003cp\u003eSupply Voltage: 5–20 V\u003cbr\u003e\nSupply Current: 50 mA\u003cbr\u003e\nCAN Standard: 2.0A (11-bit) or 2.0B with selectable bit rates (500 Kbps default \/ 1 Mbps)\u003cbr\u003e\nConfigurable settings for emissivity, channel, CAN rate, and CAN ID.\u003c\/p\u003e\n\n\u003cp\u003eDefault CAN ID (adjustable): 0x310 \/ 0x210\u003cbr\u003e\nTemperature Conversion: -200 °C offset, 0.1 °C resolution per bit.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents:\u003c\/p\u003e\n\n\u003cp\u003e4 TMU01 sensors\u003c\/p\u003e\n\n\u003cp\u003e1 CAN Bus receiver box\u003cbr\u003e\n1 Charging box\u003c\/p\u003e\n\n\u003cp\u003eIdeal for professional racing and high-performance testing, the Wireless Temperature Monitor, with its new charging and storage solution, offers unmatched convenience and reliability, making it easier than ever to track and manage tire and brake performance data. For developers, we have comprehensive documentation for easy integration with CAN applications. Contact us for more information!\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963452928340,"sku":"CC22953","price":2843.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC22953_01_0e8ddbb3-1ddd-4d67-a6a8-1b55ef0d240c.jpg?v=1788563248"},{"product_id":"embellecedor-canchecked-de-52-mm-para-mazda-mx5-miata-nc-2005-2015","title":"CANchecked 52mm Gauge Pod for Mazda MX5 \/ Miata NC 2005-2015","description":"\u003cp\u003eThanks to this blanking plate for the Mazda MX-5 NC specific air vent, you can install 52mm gauges in the cockpit.\u003c\/p\u003e\n\n\u003cp\u003eThe model-specific panel integrates seamlessly with the interior and is compatible with standard 52mm gauges, as well as, of course, our MFD15 Gen1 and Gen2. Our frames are 3D printed and carefully finished to faithfully replicate the look and feel of the original ventilation grilles.\u003c\/p\u003e\n\n\u003cp\u003ePackage contents: The kit includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent blanking plate, specific for Mazda MX-5 NC with left-hand drive. RHD\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories: C10001 GPA32 – Adapter for mounting the MFD32 in a 52mm frame; CC01002 MFD15 – 1.5-inch multi-function display, Generation 2; CC22100 CBD08 – 8-port CAN hub; CC22780 ANC04 – Quad AIN wiring harness, 300 cm; CC22902 NTC01 – Temperature sensor for fluids, 1\/8 inch NPT; CC22903 TCC01 – Type K converter, 0–1250 °C; CC22901 FLP01 – Pressure sensor, 0–10 bar (145 psi), M10x1; CC22900 BST01 – Pressure sensor, 0–5.5 bar absolute (80 psi).\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963452961108,"sku":"CC63001","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC63001_01_22083c73-4d61-49f9-98be-67cdd4f2512b.jpg?v=1788453636"},{"product_id":"embellecedor-canchecked-de-52-mm-para-mfd15-para-seat-leon-1p-con-volante-a-la-izquierda-derecha","title":"CANchecked 52mm trim for MFD15 for Seat Leon 1P with left\/right-hand drive.","description":"\u003cp\u003eWith this specific vent cover for your Seat Leon 1P, you have the option of installing 52mm gauges in your vehicle's interior.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel integrates seamlessly into the interior and is compatible with standard 52mm gauges and, of course, with our MFD15 Gen1 and Gen2. Our frames are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage Contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent cover, specific for Seat Leon 1P with left and right-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting MFD32 in a 52mm frame\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch Multifunction Display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22780 ANC04 - Quad AIN Wiring 300cm\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT Liquid Temperature Sensor\u003cbr\u003e\nCC22903 TCC01 - K-type Converter 0 to 1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor 0 to 10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor 0 to 5.5 absolute bar (80 psi)\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963453550932,"sku":"CC66050","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC66050_01_a338d09b-a845-43b7-a01b-a750ed949077.jpg?v=1788425094"},{"product_id":"canchecked-display-mfd28-gen2-para-opel-calibra-a-90-97-y-vectra-a-88-95-con-volante-a-la-izquierda-derecha","title":"CANchecked Display MFD28 Gen2 for Opel Calibra A 90-97 and Vectra A 88-95 (LHD\/RHD).","description":"\u003cp\u003eMFD28 Gen2 specific for your Opel Calibra\/Vectra A: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD28 Gen2 transforms the air vent into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eMain Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific bezel allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, like manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCan Switching: Use the display as a keyboard and send your own Can messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear engine control unit, transmission, ABS, and all-wheel drive errors.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and visualize log files. In addition, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change your sensor names.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-supply fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded with every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD28 Gen2 data display integrated into the ventilation insert for left-hand and right-hand drive vehicles\u003cbr\u003e\nConnector A (8-pin Molex)\u003cbr\u003e\nConnector B (10-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power supply, CAN bus, analog inputs, 5 V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistors for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs; we support linear 0-5 V sensors and NTC sensors. Our self-certified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be set directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is needed between 5 V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith mathematical channels, you can perform calculations between sensors. The user table allows generating additional sensors with 2D or 3D maps.\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories:\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN wiring\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/2 inch NPT\u003cbr\u003e\nCC22903 TCC01 - Type K converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963453616468,"sku":"CC35010","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC35010_01_3d9cd08d-b8b2-4180-990d-9e8dd385732d.jpg?v=1788524667"},{"product_id":"pantalla-multifuncion-mfd32-gen2-con-certificacion-canchecked-para-audi-a3-rs3-8y-lhd-2020","title":"CANchecked certified MFD32 Gen2 multifunction display for Audi A3 RS3 8Y LHD 2020 -","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your Audi A3\/S3\/RS3 8Y: seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms the ventilation grille into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and rpm.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keyboard and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data to the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All sensors to be queried are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (current\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retard per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our internally verified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be set directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. It needs a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and record the ethanol content and temperature directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eCC24000 SLM08 - External switched lighting module\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963453747540,"sku":"CC31062","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC31062_01_071276cc-dd90-421b-bfdd-688433351baa.jpg?v=1788538569"},{"product_id":"pantalla-canchecked-mfd32-gen2-para-audi-a3-s3-8l-fl-lhd-2000-2003","title":"CANchecked MFD32 Gen2 Display for Audi A3\/S3 8L FL LHD 2000-2003","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your Audi A3\/S3 8L FL: perfect integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, such as manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouch Screen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily configure and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware required.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\n\u003cp\u003eCustom pages can be created.\u003c\/p\u003e\n\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\n\u003cp\u003eWidget colors fully adjustable.\u003c\/p\u003e\n\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\n\u003cp\u003eDisplay Setup Software (DSS)\u003c\/p\u003e\n\n\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\n\u003cp\u003eWe have reverse-engineered data from most engines and can offer detailed insights. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\n\u003cp\u003ePressures:\u003c\/p\u003e\n\n\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\n\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\n\n\u003cp\u003eOther\u003c\/p\u003e\n\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel specific values\u003c\/p\u003e\n\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\n\u003cp\u003eIncluded in every delivery\u003c\/p\u003e\n\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003c\/p\u003e\n\n\u003cp\u003eConnector A (8-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector B (10-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimp pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistor for connecting external NTC sensors)\u003cbr\u003e\nQuick start guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\n\u003cp\u003eConnection and Expansion\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our CAN-certified sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003c\/p\u003e\n\n\u003cp\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\n\u003cp\u003eThe ethanol sensor is connected directly to the display. A pull-up resistor (10 kΩ) is needed between 5V and the signal. This way, ethanol content and temperature can be displayed and logged directly on the screen.\u003c\/p\u003e\n\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\n\u003cp\u003eWith math channels, you can calculate sensors against each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC24000 SLM08 - External Switched Light Module\u003cbr\u003e\nCC22780 ANC04 - Four-Way AIN Harness\u003cbr\u003e\nCC22100 CBD08 - Eight-Way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids, 1\/2 inch NPT Thread\u003cbr\u003e\nCC22903 TCC01 - Type K Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1 Thread\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963453813076,"sku":"CC31061","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC31061_01_e46b37dd-c98c-4ef9-b77e-1faf4590a78b.jpg?v=1788484335"},{"product_id":"pantalla-canchecked-mfd15-gen-2-para-alfa-romeo-giulia-stelvio-lhd-rhd","title":"CANchecked MFD15 Gen 2 Display for Alfa Romeo Giulia \/ Stelvio LHD \/ RHD","description":"\u003cp\u003eWith this vehicle-specific MFD15 Gen2 CANchecked data display for your Alfa Romeo Giulia\/Stelvio 949, you will always have all relevant values in view.\u003cbr\u003eThe MFD15 Gen2 is equipped with an OLED display that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and connection kit. It is operated using the two push buttons on the front panel. You can also connect our optional rotary knob.\u003cbr\u003eMain Features\u003c\/p\u003e\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\u003cp\u003eLED on the front panel: The front LED on the display can be used as a shift indicator or a warning light.\u003c\/p\u003e\u003cp\u003eCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008, with OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web application.\u003c\/p\u003e\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or an ethanol sensor* directly to the display.\u003c\/p\u003e\u003cp\u003ePre-defined alarms: Easily activate and customize pre-defined alarms. For example, receive an alert when the exhaust gas temperature exceeds 900 degrees. Customization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\u003cp\u003eOnline logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\u003cp\u003eFlex fuel*: View ethanol content and temperature on the display.\u003c\/p\u003e\u003cp\u003eCan switching*: Switch between cans using the display buttons and send readings from your analog inputs to the CAN bus.\u003c\/p\u003e\u003cp\u003eDifferent views\u003c\/p\u003e\u003cp\u003eChoose up to eight pages with different views and customize your display to best suit you and your vehicle:\u003c\/p\u003e\u003cp\u003eAnalog pointer\u003cbr\u003eDouble value\u003cbr\u003eGear indicator\u003cbr\u003eQuad values\u003cbr\u003eSextuple values\u003cbr\u003eBar + double display\u003cbr\u003eRound display\u003cbr\u003eBar graph (double horizontal)\u003cbr\u003ePerformance meter\u003cbr\u003eBar graph (1 to 6 vertical bars)\u003cbr\u003eSingle value\u003c\/p\u003e\u003cp\u003eConfiguration via online Display Setup Software (oDSS)\u003c\/p\u003e\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003eWith oDSS, you can fully configure your display, log values (license required), upload your own boot image, and update the display.\u003c\/p\u003e\u003cp\u003eSupported Values\u003c\/p\u003e\u003cp\u003eA frequent customer question is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\u003cp\u003eECU manufacturers determine which values are sent over the CAN bus interface. In this case, documentation is crucial, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003eIncluded by default: - OBD2 - 11 and 29-bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3\u003c\/p\u003e\u003cp\u003eIf your desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\u003cp\u003eFor all VAG vehicles manufactured from 2008 (and in some cases, earlier models as well), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle return, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\u003cp\u003eIntegrated LED\u003c\/p\u003e\u003cp\u003eThe internal LED can be used as a shift light and a warning light.\u003c\/p\u003e\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.\u003c\/p\u003e\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the pre-configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\u003cp\u003ePackage Contents and Extensions\u003c\/p\u003e\u003cp\u003eIncluded in each package:\u003c\/p\u003e\u003cp\u003eMFD15 Gen2 data display\u003cbr\u003eVehicle-specific trim for left-hand or right-hand drive\u003cbr\u003eVehicle-specific connection cable\u003cbr\u003eQuick Start Guide\u003cbr\u003eConnector B (6-pin Molex)\u003cbr\u003eConnector C (12-pin Molex)\u003cbr\u003ePre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003eCrimping pins\u003cbr\u003eTwo 1 kΩ resistors (as pull-up resistors for NTC sensors)\u003c\/p\u003e\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support 0-5V linear sensors and NTC sensors.\u003cbr\u003eThe characteristic curves of our CAN-certified sensors are stored in the display ex-factory and work immediately (plug and play):\u003c\/p\u003e\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature probe (TCC01)\u003c\/p\u003e\u003cp\u003eAIN3: Pressure sensor 0-10 bar (FLP01)\u003c\/p\u003e\u003cp\u003eAIN4: Boost pressure sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional Accessories\u003c\/p\u003e\u003cp\u003eCC22501 ETK01 - External rotary knob with 50 cm PnP connection cable\u003cbr\u003eCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003eCC22780 ANC04 - Four-way AIN harness\u003cbr\u003eCC22902 NTC01 - Temperature sensor for liquids 1\/8 inch NPT\u003cbr\u003eCC22903 TCC01 - Type K transducer 0-1250 °C\u003cbr\u003eCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003eCC22900 BST10 - 6.5 bar (95 psi) relative pressure sensor\u003c\/p\u003e\u003cp\u003e*Additional Licenses\u003c\/p\u003e\u003cp\u003eReal-time logging of the MFD15 Gen2\u003c\/p\u003e\u003cp\u003eWith the \"Real-time logging\" additional license, your display can record sensor data in oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003eAll sensors are recorded in the log (NOTE: for OBD and UDS, only those on the display are shown). Select the sensors you want to display graphically.\u003c\/p\u003e\u003cp\u003eEthanol sensor for flexible fuel directly on the MFD15 Gen2\u003c\/p\u003e\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content, as well as the fuel temperature, and also log it.\u003c\/p\u003e\u003cp\u003eCAN switching and AIN forwarding\u003c\/p\u003e\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the keys on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454042452,"sku":"CC58300","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC58300_01_cec4d5bf-89c9-47c0-a586-9a550ae2bc7f.jpg?v=1788461377"},{"product_id":"pantalla-canchecked-mfd32-gen2-para-bmw-serie-5-g30-g31-g38-f90-con-volante-a-la-izquierda-2017","title":"CANchecked MFD32 Gen2 Display for BMW 5 Series G30 G31 G38 F90 Left-Hand Drive (2017+)","description":"\u003cp\u003eThe MFD32 Gen2 multifunction display, specific for your BMW 5 Series G30\/G31\/G38\/F90, with CAN certification, integrates seamlessly and allows you to view all information.\u003cbr\u003eThe MFD32 Gen2 transforms your air vent into a smart display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without needing a workshop.\u003cbr\u003eKey Features\u003c\/p\u003e\u003cp\u003ePerfect integration: The vehicle-specific frame allows for airflow around the display.\u003c\/p\u003e\u003cp\u003eCan Bus: Display detailed vehicle data, such as manufacturer diagnostic tools.\u003c\/p\u003e\u003cp\u003eGear indicator: Directly via Can Bus or calculated from speed and RPM.\u003c\/p\u003e\u003cp\u003eTouchscreen: Intuitive navigation via touch gestures.\u003c\/p\u003e\u003cp\u003eCustomization: Design your own pages, add images, or start animations.\u003c\/p\u003e\u003cp\u003eAdditional inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003c\/p\u003e\u003cp\u003eCan Switching: Use the display as a keypad and send your own Can messages to the bus.\u003c\/p\u003e\u003cp\u003eCustomizable alarms: Easily set up and activate customizable alarms. For example, receive an alert when exhaust gas temperature exceeds 900 °C.\u003c\/p\u003e\u003cp\u003eData logging: Save your data to the internal SD card for later analysis.\u003c\/p\u003e\u003cp\u003ePerformance meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed. DTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\u003cp\u003eDimming*: The display automatically dims along with the instrument cluster.\u003c\/p\u003e\u003cp\u003eDifferent views\u003c\/p\u003e\u003cp\u003eConfigure your own page or choose from several predefined views:\u003c\/p\u003e\u003cp\u003eThe display includes predefined sample pages.\u003c\/p\u003e\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\u003cp\u003eUp to ten pages available.\u003cbr\u003e20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\u003cp\u003eWidget colors are fully adjustable.\u003c\/p\u003e\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\u003cp\u003eWith CANchecked's DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. It also includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\u003cp\u003eSupported values\u003c\/p\u003e\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\u003cp\u003eBy default, your display is delivered with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary by engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\u003cp\u003eTemperatures:\u003c\/p\u003e\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\u003cp\u003ePressures:\u003c\/p\u003e\u003cp\u003eBoost pressure, ambient pressure, pre-feed fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\u003cp\u003eLambda\/mixture\u003c\/p\u003e\u003cp\u003eLambda value, injection time, short-term Lambda trim, long-term Lambda trim\u003c\/p\u003e\u003cp\u003eOthers\u003c\/p\u003e\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\u003cp\u003eIncluded in every shipment\u003c\/p\u003e\u003cp\u003eMFD32 Gen2 data display integrated into the vent insert for left-hand drive vehicles\u003cbr\u003eVehicle-specific connection cable\u003cbr\u003eQuick start guide\u003cbr\u003eUSB data cable\u003cbr\u003eSD card (pre-installed in the display)\u003cbr\u003eSD card adapter\u003cbr\u003eScreen protector film (to prevent reflections)\u003c\/p\u003e\u003cp\u003eConnection and extension\u003c\/p\u003e\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support 0-5V linear sensors and NTC sensors. Our internally verified CAN sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\u003cp\u003eAIN2: Transducer for K-type exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003eIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and speed limits and colors can be set directly on the display.\u003c\/p\u003e\u003cp\u003eThe ethanol sensor connects directly to the display. It requires a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and log ethanol content and temperature directly on the screen.\u003c\/p\u003e\u003cp\u003eAdvanced features\u003c\/p\u003e\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003eOptional accessories\u003c\/p\u003e\u003cp\u003eCC24000 SLM08 - External switched light module\u003cbr\u003eCC22780 ANC04 - Four-way AIN harness\u003cbr\u003eCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003eCC22902 NTC01 - Temperature sensor for liquids, 1\/8 inch NPT thread\u003cbr\u003eCC22903 TCC01 - K-type converter, 0-1250 °C\u003cbr\u003eCC22901 FLP01 - Pressure sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003eCC22900 BST10 - Pressure sensor, 6.5 bar (95 psi)\u003c\/p\u003e\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454075220,"sku":"CC34068","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC34068_01_6657e5b0-e912-4873-816a-73ef63c1e899.jpg?v=1788538519"},{"product_id":"pantalla-canchecked-mfd15-gen2-para-vw-golf-mk6-tipo-1k-con-volante-a-la-izquierda-08-13","title":"CANchecked MFD15 Gen2 Display for VW Golf MK6 (Type 1K) left-hand drive (08-13)","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display specific to your VW Golf MK6, you'll always have all relevant values in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED screen that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and a connection kit. It is operated via two buttons on the front panel. You can also connect our optional rotary knob.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eCompact Design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eLED on Front Panel: The display's front LED can be used as a shift light or a warning LED.\u003cbr\u003e\nCAN Bus: Compatible with CAN Bus ECUs, proprietary CAN streams, and from 2008 onwards, OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional Inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePredefined Alarms: Easily activate and customize predefined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline Logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlexible Fuel*: Visualize ethanol content and temperature on the display.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching*: Switch between CANs using the display buttons and send the readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize the display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog Pointer\u003cbr\u003e\nDouble Value\u003cbr\u003e\nGear Indicator\u003cbr\u003e\nQuad Values\u003cbr\u003e\nSextuple Values\u003cbr\u003e\nBar + Dual Display\u003cbr\u003e\nRound Display\u003cbr\u003e\nBar Graph (Dual Horizontal)\u003cbr\u003e\nPerformance Gauge\u003cbr\u003e\nBar Graph (1 to 6 Vertical Bars)\u003cbr\u003e\nSingle Value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via Online Display Setup Software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can completely configure your display, log values (license required), upload your own start image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\n\u003cp\u003eA common customer question is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 supports ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent over the CAN bus interface. In this case, documentation is crucial, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, specific vehicle protocols like UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 and 29-bit - Ecumaster - Classic and Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 and 3\u003c\/p\u003e\n\n\u003cp\u003eIf the desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 (and in some cases, also for earlier models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, cylinder-selective ignition angle return, high\/low pressure, wastegate actuation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as both a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it starts flashing.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents and Extensions\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eIncluded in each package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Data Display\u003cbr\u003e\nVehicle-specific trim for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003c\/p\u003e\n\n\u003cp\u003eConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistors for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support linear 0-5V sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves of our CAN-certified sensors are stored in the display ex-factory and work immediately (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature Sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type Exhaust Gas Temperature Probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure Sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost Pressure Sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External rotary knob with 50 cm PnP connection cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN harness\u003cbr\u003e\nCC22902 NTC01 - Temperature sensor for liquids 1\/8 inch NPT\u003cbr\u003e\nCC22903 TCC01 - K-type transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - 6.5 bar (95 psi) relative pressure sensor\u003c\/p\u003e\n\n\u003cp\u003e*Additional Licenses\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Real-Time Logging\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license \"Real-Time Logging,\" your display can log sensor data in the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are logged (ATTENTION: for OBD and UDS, only those on screen are displayed). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol Sensor for Flexible Fuel Directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content, as well as the fuel temperature, and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching and AIN Forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the buttons on your display or the rotary knob to switch CAN switches and apply the input voltages from your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454239060,"sku":"CC51007","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC51007_01_42c37c79-2051-45ea-92ca-985b45f48fb4.jpg?v=1788484318"},{"product_id":"pantalla-canchecked-mfd32-gen2-multivan-para-vw-bus-t5-lhd-2003-2015","title":"CANchecked MFD32 Gen2 Multivan Display for VW Bus T5 LHD 2003-2015","description":"\u003cp\u003eMFD32 Gen2 CANchecked specific for your VW Bus T5: Seamless integration and all data always in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD32 Gen2 transforms your air vent into an intelligent display with essential functions. Our displays are designed for anyone to install. Most include illustrated installation instructions, so you can install it yourself without the need for a workshop.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eSeamless Integration: The vehicle-specific frame allows air to pass around the display.\u003cbr\u003e\nCan Bus: Detailed vehicle data display, similar to manufacturer diagnostic tools.\u003cbr\u003e\nGear Indicator: Directly via Can Bus or calculated from speed and RPM.\u003cbr\u003e\nTouchscreen: Navigate through pages with intuitive gestures.\u003cbr\u003e\nCustomization: Design your own pages, add images, or start animations.\u003cbr\u003e\nAdditional Inputs: Connect up to 4 analog inputs and an ethanol sensor directly to the display.\u003cbr\u003e\nCAN Switching: Use the display as a keypad and send your own CAN messages to the bus.\u003cbr\u003e\nCustomizable Alarms: Easily set up and activate customizable alarms. For example, you will receive an important warning when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eData Logging: Log and save your data on the internal SD card for later analysis.\u003c\/p\u003e\n\n\u003cp\u003ePerformance Meter: Measure your 0-100 km\/h, 100-200 km\/h, and 0-200 km\/h times with the integrated performance meter, no additional hardware needed.\u003cbr\u003e\nDTC*: Read and clear errors from the engine control unit, transmission, ABS, and all-wheel drive.\u003c\/p\u003e\n\n\u003cp\u003eDimming*: The display dims automatically along with the instrument panel.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eConfigure your own page or choose from various predefined views:\u003c\/p\u003e\n\n\u003cp\u003eThe display includes predefined example pages.\u003c\/p\u003e\n\u003cp\u003eIt is possible to create custom pages.\u003c\/p\u003e\n\u003cp\u003eUp to ten pages available.\u003cbr\u003e\n20 different widget types (e.g., sensor value, analog pointer, YT diagram, speed bar, circular display, vertical\/horizontal bar).\u003c\/p\u003e\n\u003cp\u003eWidgets can be scaled and positioned by dragging and dropping.\u003c\/p\u003e\n\u003cp\u003eFully adjustable widget colors.\u003c\/p\u003e\n\u003cp\u003eUp to 64 widgets per page.\u003c\/p\u003e\n\u003cp\u003eDisplay Configuration Software (DSS)\u003c\/p\u003e\n\u003cp\u003eWith CANchecked DSS, you can fully customize your display. With the integrated log viewer, you can download and view log files. Additionally, it includes a CAN logger. The core is the integrated TRI editor, with which you can adjust sensors (whether CAN Bus or internal): assign minimum and maximum values for warnings and change the names of your sensors.\u003c\/p\u003e\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\u003cp\u003eMany customers ask: What values can I get from my ECU? The answer: ALL.\u003c\/p\u003e\n\u003cp\u003eWe have reverse-engineered data from most engines and can provide detailed information. Our display supports querying CAN Bus data (UDS, TP2, manufacturer-specific protocols).\u003c\/p\u003e\n\u003cp\u003eBy default, your display comes with predefined TRI\/TRX files. All queried sensors are defined in these files. These vary depending on the engine. Below is an excerpt of the possibilities:\u003c\/p\u003e\n\u003cp\u003eTemperatures:\u003c\/p\u003e\n\u003cp\u003eExhaust temperature, coolant temperature, oil temperature, intake temperature, outside temperature, fuel temperature, DSG gearbox temperature.\u003c\/p\u003e\n\u003cp\u003ePressures:\u003c\/p\u003e\n\u003cp\u003eBoost pressure, ambient pressure, pre-supply fuel pump pressure, rail pressure (actual\/target).\u003c\/p\u003e\n\u003cp\u003eLambda\/Mixture\u003c\/p\u003e\n\u003cp\u003eLambda value, injection time, short-term Lambda adjustment, long-term Lambda adjustment\u003c\/p\u003e\n\u003cp\u003eOthers\u003c\/p\u003e\n\u003cp\u003eRPM, air mass, vehicle speed, throttle angle, total ignition angle, ignition angle retraction per cylinder, N75 ignition advance in %, terminal 30 voltage, engine torque, gear, diesel-specific values\u003c\/p\u003e\n\u003cp\u003eIf values are missing, they can be added later. Scope of delivery\u003c\/p\u003e\n\u003cp\u003eIncluded in every delivery\u003c\/p\u003e\n\u003cp\u003eMFD32 Gen2 data display integrated into the ventilation insert for left-hand drive vehicles\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nUSB data cable\u003cbr\u003e\nSD card (pre-installed in the display)\u003cbr\u003e\nSD card adapter\u003cbr\u003e\nScreen protector film (to prevent reflections)\u003c\/p\u003e\n\u003cp\u003eConnection and Extension\u003c\/p\u003e\n\u003cp\u003eSensors of any type can be connected via the four analog inputs. We support linear 0-5V sensors and NTC sensors. Our internally verified CAN-checked sensors are stored by default in the TRI\/TRX files and only need to be connected:\u003c\/p\u003e\n\u003cp\u003eAIN1: Temperature sensor (NTC01)\u003c\/p\u003e\n\u003cp\u003eAIN2: Transducer for type K exhaust gas temperature sensor (TCC01)\u003c\/p\u003e\n\u003cp\u003eAIN3: 0-10 bar pressure sensor (FLP01)\u003c\/p\u003e\n\u003cp\u003eAIN4: 0-5.5 bar absolute boost pressure sensor (BST10)\u003c\/p\u003e\n\u003cp\u003eFor connection, you can use our pre-assembled AIN wiring harness.\u003cbr\u003e\nIn addition to analog sensors, you can also connect our external shift light with eight LEDs. This can flash in different colors, and the speed limits and colors can be configured directly on the display.\u003c\/p\u003e\n\u003cp\u003eThe ethanol sensor connects directly to the display. It needs a pull-up resistor (10 kΩ) between 5V and the signal. This way, you can display and log ethanol content and temperature directly on the screen.\u003c\/p\u003e\n\u003cp\u003eAdvanced Functions\u003c\/p\u003e\n\u003cp\u003eWith math channels, you can calculate sensor data from each other. The user table allows you to generate additional sensors with 2D or 3D maps.\u003cbr\u003e\nOptional Accessories\u003c\/p\u003e\n\u003cp\u003eCC24000 SLM08 - External Switched Lighting Module\u003cbr\u003e\nCC22780 ANC04 - Four-Way AIN Harness\u003cbr\u003e\nCC22100 CBD08 - Eight-Way CAN Distribution Hub\u003cbr\u003e\nCC22902 NTC01 - Temperature Sensor for Liquids, 1\/8 inch NPT thread\u003cbr\u003e\nCC22903 TCC01 - Type K Converter, 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor, 0-10 bar (145 psi), M10x1 thread\u003cbr\u003e\nCC22900 BST10 - Pressure Sensor, 6.5 bar (95 psi)\u003c\/p\u003e\n\u003cp\u003e*Not available for all protocols\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454697812,"sku":"CC32095","price":540.07,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC32095_01_c9630e81-20e7-4a91-99ce-37a054b41107.jpg?v=1788560851"},{"product_id":"canchecked-mfd15-embellecedor-de-52-mm-para-mercedes-w205-5-con-volante-a-la-izquierda-derecha","title":"CANchecked MFD15 - 52mm trim for Mercedes W205 5 LHD\/RHD","description":"\u003cp\u003eWith this specific vent cover for your Mercedes 205, you can install 52 mm displays inside your vehicle.\u003cbr\u003eThe panel, designed specifically for this model, integrates perfectly into the interior and is compatible with standard 52 mm displays and, of course, with our MFD15 Gen1 and Gen2. The bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003ePackage contents\u003c\/p\u003e\u003cp\u003eThe package includes:\u003c\/p\u003e\u003cp\u003e52 mm vent cover, specific for Mercedes 205 0 with left and right-hand drive\u003c\/p\u003e\u003cp\u003eOptional accessories\u003c\/p\u003e\u003cp\u003eC10001 GPA32 - Adapter for mounting the MFD32 in a 52 mm frame\u003cbr\u003eCC01002 MFD15 - 1.5-inch multifunction display (second generation)\u003cbr\u003eCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003eCC22780 ANC04 - Quad AIN wiring 300 cm\u003cbr\u003eCC22902 NTC01 - 1\/8 inch NPT liquid temperature sensor\u003cbr\u003eCC22903 TCC01 - K-type converter 0 to 1250 °C\u003cbr\u003eCC22901 FLP01 - 0 to 10 bar (145 psi) M10x1 pressure sensor\u003cbr\u003eCC22900 BST10 - 0 to 5.5 bar absolute (80 psi) pressure sensor\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454730580,"sku":"CC61300","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC61300_01_e8f564db-efec-4a7b-80f1-bf96d00b6ed2.jpg?v=1788713237"},{"product_id":"embellecedor-canchecked-de-52-mm-para-audi-a1-s1-2014-2018","title":"CANchecked 52mm Gauge pod for Audi A1 \/ S1 2014-2018","description":"\u003cp\u003eWith this specific vent pod for your Audi A1\/S1 8X, you have the option to install 52mm gauges inside your vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThe specific panel integrates seamlessly into the interior and is compatible with standard 52mm gauges and, of course, our MFD15 Gen1 and Gen2. Our bezels are 3D printed and have been meticulously redesigned to mimic the look and feel of the original vents.\u003cbr\u003e\nPackage Contents\u003c\/p\u003e\n\n\u003cp\u003eThe package includes:\u003c\/p\u003e\n\n\u003cp\u003e52mm vent pod, specific for Audi A1\/S1 8X with left and right-hand drive\u003c\/p\u003e\n\n\u003cp\u003eOptional accessories\u003c\/p\u003e\n\n\u003cp\u003eC10001 GPA32 - Adapter for mounting the MFD32 in a 52mm frame\u003cbr\u003e\nCC01002 MFD15 - 1.5-inch multi-function display (second generation)\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN distribution hub\u003cbr\u003e\nCC22780 ANC04 - 300cm quadruple AIN wiring\u003cbr\u003e\nCC22902 NTC01 - 1\/8-inch NPT liquid temperature sensor\u003cbr\u003e\nCC22903 TCC01 - 0 to 1250 °C Type K converter\u003cbr\u003e\nCC22901 FLP01 - 0 to 10 bar (145 psi) M10x1 pressure sensor\u003cbr\u003e\nCC22900 BST10 - 0 to 5.5 bar absolute (80 psi) pressure sensor\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963454828884,"sku":"CC61005","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC61005_01_15863f70-c38a-473f-be2f-b40eb772ac40.jpg?v=1788553214"},{"product_id":"modulo-de-luz-de-cambio-universal-slm08-con-comprobacion-can-para-mfd28-y-mfd32","title":"SLM08 Universal Shift Light Module with CAN Check for MFD28 and MFD32","description":"\u003cp\u003eCANchecked Displays Universal Shift Light Module\u003c\/p\u003e\n\n\u003cp\u003eAre you looking for the perfect time to shift gears and achieve maximum performance? Look no further! The universal shift light module is the solution. This original product from CANchecked Displays is compatible with all MFD32 and MFD28 displays.\u003c\/p\u003e\n\n\u003cp\u003eWhether you're competing on the track, at the circuit, or just cruising around the city, a shift light is essential for achieving the optimal shift point. You don't need to constantly watch the tachometer to find the perfect shift. With this module, the ascending colors illuminate, indicating the ideal moment to shift gears, without needing to look at them! And best of all, you can customize the color sequence to your preferences.\u003c\/p\u003e\n\n\u003cp\u003eThe package includes the universal shift light module, a 50 cm wiring harness with compatible connectors for MFD32 and MFD28 displays, as well as an installation and operation manual.\u003c\/p\u003e\n\n\u003cp\u003eDon't miss the opportunity to take your gear changes to a whole new level! Order the CANchecked Displays universal shift light module now and enjoy exceptional performance both on the road and on the track. What are you waiting for? Let's get started!\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963455353172,"sku":"CC24000","price":67.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC24000_01_fa560e02-c821-487a-9fa4-5e4478fbcd70.jpg?v=1788484004"},{"product_id":"pantalla-canchecked-mfd15-gen2-para-vw-golf-mk5-tipo-1k-con-volante-a-la-izquierda-derecha-2003-2008","title":"CANchecked MFD15 Gen2 Display for VW Golf MK5 (Type 1K) with Left\/Right-Hand Drive, 2003-2008","description":"\u003cp\u003eWith this MFD15 Gen2 CANchecked data display specific for your VW Golf MK5, you'll always have all relevant values in view.\u003c\/p\u003e\n\n\u003cp\u003eThe MFD15 Gen2 is equipped with an OLED screen that offers excellent readability even in direct sunlight. This kit includes a vehicle-specific trim and a connection kit. It is operated via two buttons on the front panel. You can also connect our optional rotary knob.\u003c\/p\u003e\n\n\u003cp\u003eKey Features\u003c\/p\u003e\n\n\u003cp\u003eCompact design: 52 mm diameter and only 12.5 mm deep.\u003c\/p\u003e\n\n\u003cp\u003eLED on the front panel: The front LED of the display can be used as a shift light or as a warning LED.\u003cbr\u003e\nCan Bus: Compatible with Can Bus ECUs, proprietary Can streams, and from 2008 onwards, with OBD2 and deep values for VAG vehicles.\u003c\/p\u003e\n\n\u003cp\u003eWi-Fi: Connect it to your smartphone or PC and configure it using our web app.\u003c\/p\u003e\n\n\u003cp\u003eAdditional inputs: Connect up to 6 analog sensors to the inputs or connect an ethanol sensor* directly to the display.\u003c\/p\u003e\n\n\u003cp\u003ePredefined alarms: Easily activate and customize predefined alarms. For example, receive an important alert when the exhaust gas temperature exceeds 900 degrees.\u003c\/p\u003e\n\n\u003cp\u003eCustomization: Use your own logo and color scheme to personalize your MFD15 Gen2.\u003c\/p\u003e\n\n\u003cp\u003eOnline Logging*: Log your data with your smartphone or PC and save the log to your device for later analysis.\u003c\/p\u003e\n\n\u003cp\u003eFlex Fuel*: Display ethanol content and temperature on the screen.\u003c\/p\u003e\n\n\u003cp\u003eCan Switching*: Switch between cans using the display buttons and send the readings from your analog inputs to the CAN bus.\u003c\/p\u003e\n\n\u003cp\u003eDifferent Views\u003c\/p\u003e\n\n\u003cp\u003eChoose up to eight pages with different views and customize the display to best suit you and your vehicle:\u003c\/p\u003e\n\n\u003cp\u003eAnalog Pointer\u003cbr\u003e\nDouble Value\u003cbr\u003e\nGear Indicator\u003cbr\u003e\nQuad Values\u003cbr\u003e\nSextuple Values\u003cbr\u003e\nBar + Dual Display\u003cbr\u003e\nRound Display\u003cbr\u003e\nBar Graph (Double Horizontal)\u003cbr\u003e\nPerformance Meter\u003cbr\u003e\nBar Graph (1 to 6 Vertical Bars)\u003cbr\u003e\nSingle Value\u003c\/p\u003e\n\n\u003cp\u003eConfiguration via Online Display Setup Software (oDSS)\u003c\/p\u003e\n\n\u003cp\u003eNew to our MFD15 Gen2, you can access the device via Wi-Fi. This allows you to configure the MFD15 Gen2 from your smartphone or PC.\u003cbr\u003e\nWith oDSS, you can fully configure your display, log values (license required), upload your own start image, and update the display.\u003c\/p\u003e\n\n\u003cp\u003eSupported Values\u003c\/p\u003e\n\u003c!--nl--\"\u003e\u003cp\u003eA common question from customers is: What values can I request from my ECU? The answer: ALL. Your new MFD15 Gen2 is compatible with ISO 11898-2 and SAE J2284.\u003c\/p\u003e\n\n\u003cp\u003eECU manufacturers determine which values are sent via the CAN bus interface. In this case, documentation is critical, possibly even in the form of a DBC file that can be imported using our DSS. As a customer, you can access our extensive list of already implemented ECUs. In total, depending on the manufacturer, up to 64 sensors can be queried.\u003c\/p\u003e\n\n\u003cp\u003eOBD2 queries via CAN Bus (11-bit\/29-bit) are also implemented. Likewise, vehicle-specific protocols such as UDS or TP2 are available.\u003cbr\u003e\nIncluded by default: - OBD2 - 11 \u0026amp; 29 bit - Ecumaster - Classic \u0026amp; Black - VAG PQ34 - Haltech v2 - LinkECU - MaxxECU - Motec M1 - Emtron - Megasquirt 2 \u0026amp; 3\u003c\/p\u003e\n\n\u003cp\u003eIf the desired ECU is not listed, you can download or request the corresponding TRI\/TRX from our database.\u003c\/p\u003e\n\n\u003cp\u003eFor all VAG vehicles manufactured from 2008 onwards (and in some cases, also for older models), we offer detailed data queries by protocol. Values such as oil temperature, boost pressure, transmission temperature, selective cylinder ignition angle return, high\/low pressure, wastegate activation, and much more can be queried and displayed.\u003c\/p\u003e\n\n\u003cp\u003eIntegrated LED\u003c\/p\u003e\n\n\u003cp\u003eThe internal LED can be used as both a shift light and a warning light.\u003c\/p\u003e\n\n\u003cp\u003eAs a shift light, you can assign up to 8 different colors and speed limits, as well as the speed at which it begins to flash.\u003c\/p\u003e\n\n\u003cp\u003eWhen configured as a warning light, you can assign a minimum and maximum value for each sensor. If the sensor exceeds the maximum value or falls below the minimum, the LED flashes in the previously configured color. The shift light is deactivated during the warning period.\u003c\/p\u003e\n\n\u003cp\u003ePackage Contents and Extensions\u003c\/p\u003e\n\n\u003cp\u003eIncluded in each package:\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Data Display\u003cbr\u003e\nVehicle-specific trim for left-hand and right-hand drive\u003cbr\u003e\nVehicle-specific connection cable\u003cbr\u003e\nQuick Start Guide\u003cbr\u003e\nConnector B (6-pin Molex)\u003cbr\u003e\nConnector C (12-pin Molex)\u003cbr\u003e\nPre-assembled connection cables of different colors (length: 20 cm, intended use: power, CAN bus, analog inputs, 5V, sensor ground)\u003cbr\u003e\nCrimping pins\u003cbr\u003e\nTwo 1 kΩ resistors (as pull-up resistor for NTC sensors)\u003c\/p\u003e\n\n\u003cp\u003eSensors of any type can be connected via the six analog inputs; we support 0-5V linear sensors and NTC sensors.\u003cbr\u003e\nThe characteristic curves for our CAN-certified sensors are stored in the display ex-factory and work out-of-the-box (plug and play):\u003c\/p\u003e\n\n\u003cp\u003eAIN1: Temperature Sensor (NTC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN2: Transducer for K-type Exhaust Gas Temperature Probe (TCC01)\u003c\/p\u003e\n\n\u003cp\u003eAIN3: Pressure Sensor 0-10 bar (FLP01)\u003c\/p\u003e\n\n\u003cp\u003eAIN4: Boost Pressure Sensor 0-5.5 bar absolute (BST10)\u003c\/p\u003e\n\n\u003cp\u003eAIN5: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eAIN6: Not pre-configured\u003c\/p\u003e\n\n\u003cp\u003eFor connection, you can use our pre-assembled 4-way AIN harness.\u003c\/p\u003e\n\n\u003cp\u003eIf you have the corresponding license*, you can additionally connect an ethanol sensor directly to the display via a separate pin. Optional Accessories\u003c\/p\u003e\n\n\u003cp\u003eCC22501 ETK01 - External Rotary Knob with 50cm PnP Connection Cable\u003cbr\u003e\nCC22100 CBD08 - Eight-way CAN Distribution Hub\u003cbr\u003e\nCC22780 ANC04 - Four-way AIN Harness\u003cbr\u003e\nCC22902 NTC01 - 1\/8 inch NPT Liquid Temperature Sensor\u003cbr\u003e\nCC22903 TCC01 - K-type Transducer 0-1250 °C\u003cbr\u003e\nCC22901 FLP01 - Pressure Sensor 0-10 bar (145 psi) M10x1\u003cbr\u003e\nCC22900 BST10 - 6.5 bar (95 psi) Relative Pressure Sensor\u003c\/p\u003e\n\n\u003cp\u003e*Additional Licenses\u003c\/p\u003e\n\n\u003cp\u003eMFD15 Gen2 Real-time Logging\u003c\/p\u003e\n\n\u003cp\u003eWith the additional \"Real-time Logging\" license, your display can log sensor data to the oDSS. You can then download the log as a file to your smartphone or PC.\u003cbr\u003e\nAll sensors are recorded in the log (ATTENTION: for OBD and UDS, only those on the screen are displayed). Select the sensors you want to visualize graphically.\u003c\/p\u003e\n\n\u003cp\u003eEthanol Sensor for Flex Fuel directly on the MFD15 Gen2\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for the ethanol sensor, you can connect the sensor directly to the display. You need a pull-up resistor (10 kΩ) between 5V and the signal. You can now see the ethanol content as well as the fuel temperature and also log it.\u003c\/p\u003e\n\n\u003cp\u003eCAN Switching and AIN Forwarding\u003c\/p\u003e\n\n\u003cp\u003eWith the additional license for CAN switching and AIN forwarding, you can use the keys on your display or the rotary knob to switch CAN switches and apply the input voltages of your analog inputs to the CAN bus.\u003c\/p\u003e","brand":"CANchecked","offers":[{"title":"Default Title","offer_id":56963455418708,"sku":"CC51006","price":353.16,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/files\/CC51006_01_f714b139-b155-473c-be05-b42fc3b7d3e6.jpg?v=1788402002"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1027\/4701\/3460\/collections\/CC31042_01_af21122f-9e78-45e5-96e6-3c6d385f1b89.webp?v=1788547115","url":"https:\/\/www.thetunerlab.com\/en\/collections\/electronica-canchecked.oembed","provider":"Thetunerlab","version":"1.0","type":"link"}